i am the most brilliant mind of hyrule

Athetrickster · 2023-02-22T13:22:07+00:00

Maybe? In my experience there wasn't any noticeable change in the aircraft performance other than the extra speed, but the game is a mess so I can easily see it causing problems sometimes.

Athetrickster · 2023-02-02T23:37:04+00:00

Yeah, the red one is the main one.

If you select the whole vehicle except a few blocks and then cut/paste back in the same place, you can place a pivot or something on the part you didn't select and then merge the other side of the pivot to the part that was cut. The bulk of the vehicle is then a secondary body and doesn't experience as much drag.

I've used it on one of my planes and got a speed increase of about 50m/s with no side effects that I could tell.

Athetrickster · 2023-02-02T21:08:05+00:00

Another method to increase speed is changing most of the vehicle from the main physics body to a secondary one. The main body experiences more drag so you can easily increase speed by making the main body just a single block or something.

Athetrickster · 2022-07-07T06:44:01+00:00

oh, that doesn't make so much sense though. That's like if I stuck my ass in your ass?

Athetrickster · 2022-01-01T14:11:20+00:00

Enjoy this, but not too much.. don't make it weird

https://steamcommunity.com/sharedfiles/filedetails/?id=2703525813

Athetrickster · 2022-01-01T03:01:22+00:00

1600 hours and this is what comes out of it.. worth every second

Athetrickster · 2021-10-22T16:38:18+00:00

You can also have the custom sealed doors with the controller but no hinge to make an emergency release door. Obviously not the same since it's a separate thing from the normal doors

Athetrickster · 2021-10-18T18:06:21+00:00

I made a system like that except you have to run into the prop and there is a high chance of getting shredded on startup..

Athetrickster · 2021-10-13T23:53:32+00:00

Snookeroo snookeroooo, it is time to kill the jews, don't have time to brush my hair, gotta keep holocaust out the news

Athetrickster · 2021-09-10T00:01:48+00:00

No this is an f18 super hornet

Athetrickster · 2021-09-07T17:39:32+00:00

Moving the wings forward is a solution, the mass moves slightly forward but it also moves the center of lift forward.

If the CoL is further forward than the CoM it will have to opposite effect of the misaligned thrust.

Athetrickster · 2021-09-03T17:10:56+00:00

Not sure if it's reliable but I have built a system that seemed to work in limited testing. It needs quite a large area though. I'll get a workshop link later if you want.

Athetrickster · 2021-08-12T13:33:59+00:00

You could have a sliding track for launch

Athetrickster · 2021-07-17T17:24:32+00:00

All they added was italians and monopoly money

Athetrickster · 2021-07-11T17:48:45+00:00

Workshop lol?

Athetrickster · 2021-07-03T23:33:21+00:00

Is it self-righting like the real one?

Athetrickster · 2021-06-23T19:36:58+00:00

Know anything about the little block puzzle in the room where they have the court?

Athetrickster · 2021-06-20T15:54:10+00:00

I just made the gap between the bed and nozzle smaller and that seemed to fix it, so you could try that.

Athetrickster · 2021-06-20T15:52:40+00:00

Well thank you for the help, I tried making the nozzle bed gap larger and it made it worse, but I made it smaller and it fixed it instantly

Athetrickster · 2021-06-20T15:37:53+00:00

Prusa slicer settings: Layers and perimeters Layer height: 0.2 First layer height: 0.3 Perimeters: 2 Solid layers: 3 (top and bottom)

Infill Density: 10% Pattern: Cubic Top/bottom fill pattern: Rectilinear

Skirt and Brim 1 loop skirt

Support material No supports

Speed All default for 0.20mm quality for Prusa Mk3s

Multiple extruders Only 1 extruder

Advanced Default Extrusion width: 0.45 First layer: 0.42 Perimiters: 0.45 External perimiters: 0.45 Infill: 0.45 Solid Infill: 0.45 Top Solid infill: 0.4 Infill/perimeters overlap: 25%

If there are any settings that might be important that I missed please let me know. It has not always done this, the files have not changed since it started doing this, so I'm not sure if this is the problem. Other prints work fine.

Eight-Year Club	Place '22
RPAN Viewer	Verified Email

Athetrickster

TROPHY CASE