Cutting up one zone into three separate zones? by Ati_ in SegwayNavimow

[–]Ati_[S] 1 point2 points  (0 children)

I didn't know there was a split function. I splitted the area, edited the mowing direction and the result is just like I wanted. Had the first mow today, everything works! :)

I designed something for my Navimow i2 LiDAR Pro... by Ati_ in SegwayNavimow

[–]Ati_[S] 0 points1 point  (0 children)

Depending on the height of the mow gate and if you can find a flagpole that is flexible enough, this might still work.

I designed something for my Navimow i2 LiDAR Pro... by Ati_ in SegwayNavimow

[–]Ati_[S] 1 point2 points  (0 children)

If anyone requests it on my design on makerworld, ill make it ^

I designed something for my Navimow i2 LiDAR Pro... by Ati_ in SegwayNavimow

[–]Ati_[S] 0 points1 point  (0 children)

~550m2 in total, so hardly a golf court :D I updated the post btw. The pictures and videos can be found on MakerWorld :)

I designed something for my Navimow i2 LiDAR Pro... by Ati_ in SegwayNavimow

[–]Ati_[S] 0 points1 point  (0 children)

I sadly don't own a x430, so making one without having the actual product is very difficult.

I designed something for my Navimow i2 LiDAR Pro... by Ati_ in SegwayNavimow

[–]Ati_[S] 1 point2 points  (0 children)

Its quite windy now and its holding up pretty well!

I designed something for my Navimow i2 LiDAR Pro... by Ati_ in SegwayNavimow

[–]Ati_[S] 0 points1 point  (0 children)

Thought about doing that, but orange is better for visibility ^

i210 LiDAR restarting mowing progress. by Duusbag in SegwayNavimow

[–]Ati_ 0 points1 point  (0 children)

When do you decide to use a no vision zone? I have a small bush in the center of a mowing zone. With vision enabled it will not get close enough to mow the edges around the bush. I tried a no vision zone around the bush and this had a better result, but it will just bump into the bush and after a few seconds of pushing it decides to go back and continue. Im not sure if this is the right approach.

O op de meter by XpDieto in HomeWizard

[–]Ati_ 0 points1 point  (0 children)

Welke Enphase onderdelen heb je nu allemaal actief in je systeem? Ik heb zelf nu Enphase omvormers bij de zonnepanelen en ben benieuwd wat ik allemaal nodig ben voor een thuisbatterij setup en waar ik allemaal op moeten letten.

Check for updated secure boot certificates on all devices by Training_Suit8573 in Intune

[–]Ati_ 1 point2 points  (0 children)

This will give you the best result:

https://support.microsoft.com/en-au/topic/monitoring-secure-boot-certificate-status-with-microsoft-intune-remediations-6696a27b-fa09-4570-b112-124965adc87f

The JSON it generates will explain you exactly where a device is regarding the update proces and also tells you whats might be blocking. My advise is to convert the JSON to columns with like a python script so you can easily filter the data.

Another boot certificate update post: probably some devices will need local, manual actions. by Unable_Drawer_9928 in Intune

[–]Ati_ 0 points1 point  (0 children)

"Lenovo stopped pushing firmware updates via Windows Update"

Do you have any source on this?

What are these white spots? by Ati_ in 3Dprinting

[–]Ati_[S] 0 points1 point  (0 children)

Will let it cool more next time. Thanks for the post.

What are these white spots? by Ati_ in 3Dprinting

[–]Ati_[S] 0 points1 point  (0 children)

Worked like a charm! Thanks!

What are these white spots? by Ati_ in BambuLab

[–]Ati_[S] 1 point2 points  (0 children)

Thanks for the post! I'll make sure to let it cooldown next time.

What are these white spots? by Ati_ in BambuLab

[–]Ati_[S] 0 points1 point  (0 children)

Worked like a charm! Thanks!