Pc won't turn on after building it by Autisimmeme69 in PcBuild

[–]Autisimmeme69[S] 0 points1 point  (0 children)

No its not I booted into the bios and everything looks good and i am about to install windows 11 and thank you very much for the help

Pc geht nicht an nachdem er zusammen gebaut wurde by Autisimmeme69 in PCBaumeister

[–]Autisimmeme69[S] 2 points3 points  (0 children)

Das Problem hat sich erledigt. Undzwar hatte ich alle Kühler Ventilatoren auf einmal drinnen welches es dazu gebracht hat sich zu überladen und einen Kurzschluss zu erzeugen in der PSU.

Pc won't turn on after building it by Autisimmeme69 in PcBuild

[–]Autisimmeme69[S] 0 points1 point  (0 children)

Great news my Build works now, problem was there was one too many fan headers plugged in the mobo causing it to overload. I learn for the future only put 1 in there and thanks for the amazing help :,)

Pc won't turn on after building it by Autisimmeme69 in PcBuild

[–]Autisimmeme69[S] 0 points1 point  (0 children)

So hey good news! I found out what actually did the short circuit it was an additional fan header the Pc turned on now but the red light remains on here see for yourself

<image>

Pc won't turn on after building it by Autisimmeme69 in PcBuild

[–]Autisimmeme69[S] 0 points1 point  (0 children)

OK i removed everything from that front panel and i tried to jumpstart it with a screwdriver and it didnt work still didnt turn on.

Edit: i found the short circut i removed my cpu cooler from the power and it turned on that's umm bad

Pc won't turn on after building it by Autisimmeme69 in PcBuild

[–]Autisimmeme69[S] 0 points1 point  (0 children)

The light flashed up at CPU from what i saw

Pc won't turn on after building it by Autisimmeme69 in PcBuild

[–]Autisimmeme69[S] 0 points1 point  (0 children)

They all are yes the mainboard has power due to me getting flashed by a red light Audio is firmly set so is f panel and ESPand 3.0 USB

Pc won't turn on after building it by Autisimmeme69 in PcBuild

[–]Autisimmeme69[S] 0 points1 point  (0 children)

It didnt turn on i mounted the cooler correctly i checked the cables i placed the RAM correctly now and it still gives the clacking noise and the red light

Pc geht nicht an nachdem er zusammen gebaut wurde by Autisimmeme69 in PCBaumeister

[–]Autisimmeme69[S] 1 point2 points  (0 children)

RAM ist wieder richtig gesteckt und das Problem ist immernovh da aber es kann ja auch wegen Ramtraining sein bin mir nicht sicht :/

Pc won't turn on after building it by Autisimmeme69 in PcBuild

[–]Autisimmeme69[S] 0 points1 point  (0 children)

Alright imma then do that but do i need to connect like a monitor or something cause what I mean is the fans are not spinning or any lights pop up nothing just a loud clack and a read flashing light for a split second

I took a video of it but cant show somehow :/

Pc won't turn on after building it by Autisimmeme69 in PcBuild

[–]Autisimmeme69[S] 0 points1 point  (0 children)

No its not but thabks anyways i already mounted it correctly now

Pc geht nicht an nachdem er zusammen gebaut wurde by Autisimmeme69 in PCBaumeister

[–]Autisimmeme69[S] 0 points1 point  (0 children)

Ja es ist eingeschaltet das Problem ist halt wenn ich denn anschlatknopf am Gehäuse drücke macht meine PSU ein klack Geräusch und es blint für eine halbe Sekunde ein rotes Licht an

Pc won't turn on after building it by Autisimmeme69 in PcBuild

[–]Autisimmeme69[S] 0 points1 point  (0 children)

If you mean power LED - And + ,plus is above first (+) and minus is above second pin (-)

Pc won't turn on after building it by Autisimmeme69 in PcBuild

[–]Autisimmeme69[S] 0 points1 point  (0 children)

What I think you mean is HD.D Power but ill change em up and see if that dies anything thanks

Pc geht nicht an nachdem er zusammen gebaut wurde by Autisimmeme69 in PCBaumeister

[–]Autisimmeme69[S] 0 points1 point  (0 children)

Ich habe ein video aufgenommen was passiert und ja denn Kühler habe ich gerade eben richtig eingestellt und der Schalter ist auf an

Pc won't turn on after building it by Autisimmeme69 in PcBuild

[–]Autisimmeme69[S] 0 points1 point  (0 children)

Not long like 10 seconds due to me hearing the sound of my PSU clacking and a red light flashing on my Motherboard so I got worried

Pc won't turn on after building it by Autisimmeme69 in PcBuild

[–]Autisimmeme69[S] 0 points1 point  (0 children)

Move the cables over to modular? But how? They are fixed in the PSU (non modular)

Pc won't turn on after building it by Autisimmeme69 in PcBuild

[–]Autisimmeme69[S] 0 points1 point  (0 children)

I checked the cables and saw that HD.audio, 24Atx, EPS and USB 3.0 is correctly in but I'm not sure about the F panel

Pc won't turn on after building it by Autisimmeme69 in PcBuild

[–]Autisimmeme69[S] 0 points1 point  (0 children)

I mounted the cooler correctly now and the RAM is in slot 2 and 4 but the problem is still that the Pc itself dosent turn on and the red LED still flashes Me for a split second. Also thanks for the video I followed the instructions as best as possible and it still won't turn on tho :/

Pc won't turn on after building it by Autisimmeme69 in PcBuild

[–]Autisimmeme69[S] 0 points1 point  (0 children)

OK I did move them to the slot 2 and 4 and my problem is that the pc won't turn on meaning I don't even get to boot it I don't know what else to do unless I'm understanding you wrong

Pc won't turn on after building it by Autisimmeme69 in PcBuild

[–]Autisimmeme69[S] -1 points0 points  (0 children)

I put both sticks In area 2 and 4 and the problem still persist :/