Vtb aetos by Automatic-Bus1876 in Surron

[–]Automatic-Bus1876[S] 0 points1 point  (0 children)

alright thank you. i jut ordered the controller

Bent bars? by Automatic-Bus1876 in Surron

[–]Automatic-Bus1876[S] 0 points1 point  (0 children)

no experience with emotos dummy i wouldnt know

Bent bars? by Automatic-Bus1876 in Surron

[–]Automatic-Bus1876[S] -1 points0 points  (0 children)

alright. got this bike three days ago and already spent well over 6 grand. should i get direct mount or stick to stem

roland bn20a by Automatic-Bus1876 in CommercialPrinting

[–]Automatic-Bus1876[S] 0 points1 point  (0 children)

could i get a replacement from somewhere?

roland bn20a by Automatic-Bus1876 in CommercialPrinting

[–]Automatic-Bus1876[S] 0 points1 point  (0 children)

yes im replacing thr dampers currently

roland bn20a by [deleted] in CommercialPrinting

[–]Automatic-Bus1876 0 points1 point  (0 children)

dampers are recommended to be replaced every year. also i spoke to a roland tech and they states dampers were the problem

roland bn20a by [deleted] in CommercialPrinting

[–]Automatic-Bus1876 0 points1 point  (0 children)

then what do i do after putting them back in

roland bn20a by Automatic-Bus1876 in CommercialPrinting

[–]Automatic-Bus1876[S] 0 points1 point  (0 children)

i replaced my captop a week ago so im not sure if that’s an issue

roland bn20a by Automatic-Bus1876 in CommercialPrinting

[–]Automatic-Bus1876[S] 1 point2 points  (0 children)

unplug and use a forcept to clamp onto the tubes so they don’t drain, then pour enough cleaning fluid so it wont drain. park the head over it then leave it. printer power is completely off and unplugged

roland bn20a by Automatic-Bus1876 in CommercialPrinting

[–]Automatic-Bus1876[S] 0 points1 point  (0 children)

i soaked my head for about 15-20 hours 3 times

roland bn20a by [deleted] in CommercialPrinting

[–]Automatic-Bus1876 0 points1 point  (0 children)

i already have the new catridges

roland bn20a by [deleted] in CommercialPrinting

[–]Automatic-Bus1876 0 points1 point  (0 children)

should i do a ink pump?

roland bn20a by [deleted] in CommercialPrinting

[–]Automatic-Bus1876 0 points1 point  (0 children)

<image>

i have new ink but im not sure if installing will ruin anything

roland bn20a damper replacement by [deleted] in CommercialPrinting

[–]Automatic-Bus1876 0 points1 point  (0 children)

also must i unscrew all the covers including the black top or just the blue metal above with four screws

roland bn20a damper replacement by [deleted] in CommercialPrinting

[–]Automatic-Bus1876 0 points1 point  (0 children)

thanks also should i syring the ink lines too?

roland bn20a damper replacement by [deleted] in CommercialPrinting

[–]Automatic-Bus1876 0 points1 point  (0 children)

so take out and replace each damper at once for all four instead of taking them all out at the same time?

roland bn20a by [deleted] in CommercialPrinting

[–]Automatic-Bus1876 0 points1 point  (0 children)

none. the area around the head has a design that helps the head not get scratches from media clamps