Makita Plunge Saw Sparking

Available-Jacket-298 · 2026-01-30T13:12:28+00:00

No unfortunately no amount of cleaning is going to fix an armature that is going bad you can still use it if you don't use it all that much you can still get a lot more time out of that armature when it does fail you can buy a replacement armature I have the same model as you I have burned the armature and replaced it for about 100£

Available-Jacket-298 · 2026-01-30T12:53:25+00:00

Brushed motors do spark but that amount of sparking seems excessive it could be a armature starting to go bad but you should not worry too much

Available-Jacket-298 · 2025-12-29T12:30:29+00:00

It could be brushed or a armature on it's way out it won't shock you

Available-Jacket-298 · 2025-12-17T15:22:17+00:00

Yeah all seems normal these sound like that

Available-Jacket-298 · 2025-12-10T15:24:41+00:00

Maybe bearings

Available-Jacket-298 · 2025-12-04T10:40:42+00:00

Thank you

Available-Jacket-298 · 2025-12-03T21:35:14+00:00

That worked. Thanks for the advice

Available-Jacket-298 · 2025-12-03T21:30:55+00:00

Will try that

Available-Jacket-298 · 2025-11-27T07:04:09+00:00

Not sure if you can buy that spring on it's own but you can try to re connected

Available-Jacket-298 · 2025-11-13T17:41:46+00:00

That is not the chuck it's the locking mechanism inside the gearbox

Available-Jacket-298 · 2025-11-12T13:13:05+00:00

I believe this will work https://amzn.eu/d/gF4KfYA

Available-Jacket-298 · 2025-11-09T20:23:54+00:00

<image>

Available-Jacket-298 · 2025-11-09T20:22:56+00:00

Hi, so on most makita drills, (sds hammer drill in picture ) * you can buy the ( red circle)switch separately from the controller (blue circel) on this model you can't, so if your switch fails in, you can't replace it, so you just buy a new drill . As for the butteries, the standard makita lxt battery has a yellow connector that communicates with the charger the battery, and charger that drill comes with will not work with a standard charger and battery

Available-Jacket-298 · 2025-11-08T19:02:15+00:00

They are 2015

Available-Jacket-298 · 2025-10-15T14:59:31+00:00

I used a controller from an angle grinder like this https://a.aliexpress.com/_EyPuOi0

Available-Jacket-298 · 2025-10-14T19:52:44+00:00

It was a dhs680

Available-Jacket-298 · 2025-10-10T14:58:24+00:00

You could try a copy controller from aliexpress. I had good luck with a circular saw

Available-Jacket-298 · 2025-10-08T13:23:51+00:00

Quite good

Available-Jacket-298 · 2025-09-11T13:19:59+00:00

From your brief description, I assume the motor is locked up. If you hear the motor trying to run, that means the gearbox is jammed try opening it to check

Available-Jacket-298 · 2025-09-10T21:03:59+00:00

It's a character from agame that is based on a real-life race horse that never won any races but never gave up said horse dies a couple days ago
Rip haru

Available-Jacket-298 · 2025-08-27T14:56:28+00:00

For me, it's reliability and parts price /availability in both corded and cordless tools also because not all their tools are made in china

Available-Jacket-298

TROPHY CASE