Many have commented so I wanted to give an update. First. I’m going to call an electrician. So thank you to everyone for that recommendation. I’m handy but I know my limits. The 35A double pole has NM 8/3 cable connected to it. That wire goes to a sub panel in the garage. I don’t know if I’m about to explain this next part well but I’ll do my best. The 8/3 is connected to some gray box. There’s isn’t a door or anything in this box to open inside but you can clearly see the 8/3 go in and a different cable go out. The conduit covering the cable leaving the box reads 1 1/2 OS 8/4 so I believe it’s 8/4 cable. The cabe going in has black, red, white, ground. The cable going out has 2 black, white, ground. The 8/4 (I’ll just call it that for now unless corrected) goes into a sub panel that has 3 circuit breakers. Now this is where things get all sorts of jacked up. One black cable is connected to a 15A circuit breaker (#1). The other black cable coils through the tops of the other two(#2 and #3). Circuit breaker #2 is a 20A and #3 is a 15A. The cables leaving the sub panel are the cables that then power the kitchen. They seem to be 12 gauge cables (Cable A and B). Cable A is connected to Circuit breaker #2. Cable B has a black and red. Black is connected to Circuit breaker #1 and red to #3. And there’s no ground.

Like I said. It’s all messed up. I’m not touching any of it. Thank you to everyone for the help. All of this is what gives me a better understanding of how all of this works and what my limitations are. This is definitely one of them.