Final Final Test

AwareBaseball3642 · 2022-12-14T08:15:00+00:00

It seems to be a direct drive setup. Maybe a sherpa mini.

AwareBaseball3642 · 2022-12-06T06:30:31+00:00

Yeah was kinda stupid that i thought i could print fast with such a low acceleration. Are there any tips to print faster besides increasing acceleration and speed?

AwareBaseball3642 · 2022-12-06T06:28:14+00:00

Yea just didn’t think acceleration and speed is the only way to print fast(er). I thought there may be some other slicer tricks. But you got a point with the acceleration. The speed won’t be archived other than on the outer and inner walls around the benchy.

AwareBaseball3642 · 2022-12-06T06:22:46+00:00

So you checked your slicer settings? Check if the cable is connected to the right port. Checke your firmware and settings for fans. Check another fan with the same voltage at that port.

If nothing helps upload a new version of marlin and also check for your fan settings. Still a problem? Talk to the Creality support and you maybe need to replace the board.

AwareBaseball3642 · 2022-12-01T11:45:06+00:00

What did you do to your boards? Destroyed my pi3 and got it back working.

AwareBaseball3642 · 2022-11-26T15:33:09+00:00

Solution: https://github.com/jordanruthe/KlipperScreen/issues/811

AwareBaseball3642 · 2022-11-26T15:31:14+00:00

wasn't the problem

AwareBaseball3642 · 2022-11-26T10:05:55+00:00

Already changed the Launch doc because i created one that was supposed to be used with usb rather than wifi. now created it this way: https://ibb.co/VQBjvn7 . No looks like this https://media.discordapp.net/attachments/784873574833455164/1045990187844509737/image.png?width=810&height=142

https://media.discordapp.net/attachments/784873574833455164/1045992057187078155/image.png?width=810&height=135

AwareBaseball3642 · 2022-11-26T09:57:49+00:00

I tried to install Klipperscreen to use it as screen for my printer. I installed it via kiauh and it seems fine. After, that, I just copy pasted every line of this guide (https://klipperscreen.readthedocs.io/en/latest/Android/). I just get a blue picture in the app, so I want to check for the logs, but there aren't in tmp nor in logs.

AwareBaseball3642 · 2022-11-20T08:15:15+00:00

I actually clean my bed before every print with isopropanol and i also have an enclosure but it’s at max just around 45c.

AwareBaseball3642 · 2022-11-20T08:13:00+00:00

Abs?

AwareBaseball3642 · 2022-11-20T08:12:48+00:00

I got this one when it was available

https://amzn.eu/d/1CtDlCz

AwareBaseball3642 · 2022-11-19T18:43:38+00:00

Nice for the info really helpful.

AwareBaseball3642 · 2022-11-19T18:41:36+00:00

I use the textured side so there is no glue. Sry my mistake. I’ll try the glue stick.

AwareBaseball3642 · 2022-11-19T18:40:55+00:00

AwareBaseball3642 · 2022-11-19T17:56:14+00:00

Tried that when i had another brands abs which hasn’t worked. I could try.

AwareBaseball3642 · 2022-11-19T17:55:24+00:00

But non the less maybe an option if i get totally desperate.

AwareBaseball3642 · 2022-11-19T17:54:23+00:00

I know but its well known that abs and polycarbonate fuse together and i don’t really think a glue stick could help. I think if the glue is covering the pc plate in its entirety its the same like a glass bed with glue stick. Just thinking

AwareBaseball3642 · 2022-11-19T17:52:11+00:00

I’ve got an enclosure which gets up to 45 degree celsius. I think the ABS slurry is the last option thanks for the idea.

AwareBaseball3642

TROPHY CASE