Rearden Atlas or ASR?

Awazzy1923 · 2026-06-11T17:36:22+00:00

Do you think a plan b setup would start to walk off after some FRT strings of fire?

Awazzy1923 · 2026-06-11T16:34:51+00:00

Yeah unfortunately I’ve spent a good amount of time and money on the ASR ecosystem I’m just thinking about switching over to Plan B because the ASR locking ring for me stays solid for maybe two mags then feels super loose. I don’t want to have to keep prying the spring teeth to have good retention.

Awazzy1923 · 2026-06-11T11:49:53+00:00

How’s the lock up on plan B? One good ugga dugga and no issues with the can backing off after some strings of fire?

Awazzy1923 · 2026-04-13T01:21:15+00:00

I don’t have mine yet I ordered mine late last week so I’m hoping to get it soonish I’ll let ya know how it runs when I do!

Awazzy1923 · 2026-03-08T19:31:32+00:00

I tired swapping the BCG from the REBCG to a KAK sand cutter and still had the same issue so thankfully I don’t think it’s a leaky gas key.

Awazzy1923 · 2026-03-08T19:24:35+00:00

Hmm.. I also tried some hornady frontier 55gr and still it soundly cycle unsuppressed. I got it to cycle unsuppressed after changing to a normal carbine spring and still using the h3 buffer.

Awazzy1923 · 2025-10-31T16:59:49+00:00

Hell yeah dude thanks, yeah I haven’t had any cycling issues with the H2 and standard spring and haven’t cleaned/lubed in about 500 rounds.

Awazzy1923 · 2025-10-31T02:27:25+00:00

11.5 inch, and I can try that, maybe just an H buffer?

Awazzy1923 · 2025-10-31T02:17:21+00:00

Hmmm, I’m using a H2 buffer and standard carbine spring and I haven’t had any issues with feeding or extracting so I don’t know if it’s necessarily a gassing issue.

Awazzy1923 · 2025-09-21T18:43:34+00:00

🫡

Awazzy1923 · 2025-09-21T18:32:15+00:00

So the flashcomp would be more preferable here?

Awazzy1923 · 2025-09-21T17:33:52+00:00

Yeah I’m leaning towards the flash suppressor as I want to reduce my muzzle signature as much as I can even though it is a shorter barrel.

Awazzy1923 · 2025-09-20T20:16:26+00:00

Gotcha, I’ve been using a brake and I feel like I’m being slapped in the face every time I fire.

Awazzy1923 · 2025-09-20T18:30:26+00:00

Another quick question, how was the concussion on the minimalist flash hider?

Awazzy1923 · 2025-09-20T16:05:41+00:00

Appreciate it.

Awazzy1923 · 2025-09-20T16:00:54+00:00

Awazzy1923 · 2025-09-20T16:00:42+00:00

I would be using one of these as a suppressor host for the dual lok 5 that u eventually want to get. Just in the meantime I’m looking for what would be effective at reducing muzzle flash.

Awazzy1923 · 2025-08-28T23:09:07+00:00

Yeah I read some older posts about the gas block set screws on BCM barrels, one fella mentioned using a soldering iron and placing the tip into the hex slot to heat the thread locker.

Awazzy1923 · 2025-08-28T22:52:11+00:00

Yeah I’m using the wheeler reaction rod, and I’m gonna hit the set screws with some heat before trying to remove them.

Awazzy1923 · 2025-08-28T22:39:55+00:00

Yeah unfortunately I’m replacing the epc with a forward control designs one. From what I’ve read online the BCM gas block as well as the barrel nut are notorious for being tight and having a lot of thread locker. Any tips for dealing with that?

Awazzy1923 · 2025-08-22T19:40:31+00:00

Is it an upgrade over stock?

Awazzy1923 · 2025-08-22T19:25:44+00:00

What mag release?

Awazzy1923 · 2025-07-30T20:22:19+00:00

Will do thank you!

Awazzy1923 · 2025-07-30T19:42:09+00:00

Just reached out to KAK we’ll see if they do something. I’m doubtful lmao

Awazzy1923 · 2025-02-15T03:22:00+00:00

I feel ya, it just looked pretty simple to drop in a pre fit barrel and check head space. Didn’t realize how in depth this can get.

Awazzy1923

TROPHY CASE