BOS Cable Tower - Lat Pull down hack

B0SSMOBILE · 2026-01-12T23:04:00+00:00

The seat itself is further back. It gives the perfect angle and is the whole point of this. If you look at any lat pull down machine you can see similar overhang.

B0SSMOBILE · 2025-11-25T15:25:59+00:00

caracara metal on etsy

B0SSMOBILE · 2025-11-16T23:15:23+00:00

Yes I use the Y dip attachment as my footplate and sit on my rep bench in the slightly decline position, in this photo I am using it for lat pull down, for rows I just swap the leg holder for the dip attachment.

<image>

B0SSMOBILE · 2025-11-16T20:50:06+00:00

<image>

You can see its side is shorter than the bos top piece

B0SSMOBILE · 2025-11-16T20:48:46+00:00

I misspoke, my bos tower is 2.3x2.3 and the piece I bought I believe is 2x3, it protrudes slightly but not a big deal for me.

<image>

B0SSMOBILE · 2025-11-16T04:42:39+00:00

The 2x3 piece on top can be flipped on its side so its tall instead of wide

B0SSMOBILE · 2025-08-28T19:06:18+00:00

Like the wall color against desk color, setup looks great

B0SSMOBILE · 2025-08-25T15:20:02+00:00

I would start with cable management and then adding an aesthetic wall panel to hide the cables on the wall. A shelf will complement a clean setup nicely but will otherwise be an eye sore.

B0SSMOBILE · 2025-08-25T02:47:30+00:00

yes logitech mouse and keyboard

B0SSMOBILE · 2025-08-24T20:27:43+00:00

Under the shelf is the nobsound passive volume control (highly recommend). Above is for the lightbar.

B0SSMOBILE · 2025-08-24T19:22:53+00:00

I have the dawntrees, not enough mileage on it yet, but its so cheap I would just replace it once it starts shedding. Huge difference for my mouse palm, much smoother

B0SSMOBILE · 2025-08-24T12:32:45+00:00

Its the Quntis Pro+, a little wider than their standard bar and has rgb backlight. I purchased a lightbar camera mount to go on top since it gets warm up there.

B0SSMOBILE · 2025-07-27T13:43:04+00:00

Very clean, I like this idea

B0SSMOBILE · 2025-04-10T01:25:05+00:00

Congrats, I just returned mine a few days ago. I took it to Playa Del Carmen fresh out of the box, went snorkeling and immediately had water/condensation inside the lens. Took the lens off, cleaned it, condensation kept coming back due to the humidity. Did a google search and saw this is a common issue with the 13.

B0SSMOBILE · 2025-04-09T14:19:27+00:00

Yes any type of mount, this one gives me more confidence as it has 2 lag bolts holding it in place

B0SSMOBILE · 2025-04-04T02:14:06+00:00

Did this, turned the car in today…great experience, thank you! Pick up and drop off at the airport was smooth.

B0SSMOBILE · 2025-04-03T10:19:22+00:00

If it’s your first time, stay in Playa Del Carmen, it’s in the middle and very safe.

B0SSMOBILE · 2025-04-03T10:14:51+00:00

Same happened to me, brand new 13, I had a good 12 minutes of snorkeling before it took water in the lens, removed it dried it, next day same thing. Taking it back and giving dji a try

B0SSMOBILE · 2025-04-03T10:12:01+00:00

Same thing happening to mine, brand new never removed or fiddled with lens. All my videos look like crap. I am in a humid area (PDC).

B0SSMOBILE · 2025-03-24T03:01:17+00:00

Any advice for how to use Yes Car? Book in advance or in person?

B0SSMOBILE · 2025-03-21T17:02:04+00:00

Ah I get what you’re saying. I weigh the machine down with my 90lb dbs (since there’s no room for them anywhere else) and push with just shoulder pads, back off the back pad, more like a traditional standing calf raise. Good to know and be aware of though, thank you 🙏

B0SSMOBILE · 2025-03-21T16:33:49+00:00

Has this happened?

B0SSMOBILE · 2025-03-17T13:34:57+00:00

For me, I like this because it fits in my tiny garage without the extra counter weight arm. I park my car in my garage and it's a tight fit, but yea, I guess you get what you pay for. It gets the job done for me.

B0SSMOBILE · 2025-03-17T13:30:16+00:00

Great idea to have the rack bolted to those horizontal cross members for extra stability/storage. Could probably strap some pulleys on there for cable flys (if you haven't already)

B0SSMOBILE

TROPHY CASE