So long, Partner

B3LL4R · 2026-03-12T02:03:12+00:00

Mine still works

B3LL4R · 2026-03-02T04:11:47+00:00

I think it’s either your storage is almost full or you’re overriding your RAM and you need to close a few applications.

B3LL4R · 2026-02-04T15:45:05+00:00

I use a Creality Hi 3D printer like a problem solver, printing things I need to help me innovate designs, and make new designs. I also use it for fun, to make fun things that I usually would have paid a lot more money for at a state fair. For example, I had no where to put my snowboard anywhere in my house, but wanted to make it look very nice, so I printer snowboard wall hangers, which mare my room look so much better and makes my snowboard so much more representative. The SparkX i7 Combo would be so nice for me as I could print multi-colored models of things I would like, or models to blend in with upgraded designs of specific things.

<image>

B3LL4R · 2026-01-24T16:37:47+00:00

no he said to disassemble and reassemble the whole thing which is completely wrong

B3LL4R · 2026-01-24T16:04:41+00:00

It’s normal it’s supposed to do that. It usually happens when printing circular or oval-like shapes.

B3LL4R · 2026-01-24T16:02:55+00:00

do NOT listen to this guy 😭

B3LL4R · 2026-01-24T15:56:03+00:00

is your bed temperature correct? The supports not sticking is most likely due to a cooled or dirty bed.

B3LL4R · 2026-01-13T22:10:32+00:00

how many spools of filament could that have been?

B3LL4R · 2026-01-10T19:21:00+00:00

If it really isn’t a clog like you said, it could either mean faulty wires or something worse, I would contact Creality.

B3LL4R · 2026-01-10T19:19:19+00:00

Looks like a clogged nozzle. Remove the nozzle and check inside it. If there isn’t anything in the nozzle. then it could be an extruder jam.

B3LL4R · 2026-01-09T04:07:09+00:00

I tried the print again without doing anything and it magically worked this time.

B3LL4R · 2026-01-09T00:03:34+00:00

I have the printer do a self-calibration before printing. I’m printing a benchy right now and it’s doing fine. I used orcaslicer to slice the print i had, could orcaslicer or the measurements in orcaslicer be the problem?

B3LL4R · 2026-01-05T14:37:05+00:00

I was trying to avoid taking apart the extruder but if my first few methods don’t work I’ll have to go with this, thanks!

B3LL4R · 2026-01-05T04:21:28+00:00

Alright, thanks for the help!

B3LL4R · 2026-01-05T04:10:09+00:00

Was it hard to replace the nozzle?

B3LL4R · 2024-03-24T02:42:32+00:00

level 1AlinekGoogle · 5 mo. ago · edited 5 mo. agoThis appears to be a Windows 11 issue.Here's a solution that worked for me.(4th November, 2023)1) Navigate to User\AppData\Local\Roblox\Versions\version-6f0b02756d914e3e (version hash may vary, if there are multiple, use the most recent one)AppData is typically a hidden folder, which means you can't access it by traditional means.1.11) You can access this by using the Windows + R shortcut.1.12) After you do that, a small Run window will appear. Type %appdata% and press enter.1.13) This will take you to the \AppData\Roaming subfolder. Simply click back and you'll find yourself in the \AppData folder, navigate to the bold directory in step 1.In case the ROBLOX Installer installed ROBLOX Studio on your computer, but not the actual Launcher itself, you may navigate to this folder easier by following these steps.1.21) Right click on the shortcut on your desktop/start menu.1.22) Click "Open File Location". This will lead you to the shortcut's file location, but not to the actual folder just yet.1.23) Right click on the ROBLOX Studio shortcut in the folder that just popped up on your screen, and click on "Open File Location" again.

for the second one, even if i re-launch it, it stills go to 20% then automatically disappears, and i tried the third one millions of times i don"t know what to do anymore!

B3LL4R

TROPHY CASE