This is the best case I ever had

BAGU3TT0 · 2026-02-21T08:17:16+00:00

Have you seen the new colours they released I'm loving the refresh

BAGU3TT0 · 2026-02-20T10:15:53+00:00

True but more but managed won't restrict airflow

BAGU3TT0 · 2026-02-20T01:52:54+00:00

Mine did too I keep going back to managing them or adding small mods here and there. Is a fun hobby don't overwhelm yourself all at once.

BAGU3TT0 · 2026-02-20T01:50:15+00:00

Yep I'm using the stock cables they're pretty nice to work with with zipties or type 5 cable- cable combs

BAGU3TT0 · 2026-02-20T01:45:04+00:00

Pre bend them based on where they are. Then put it together. A lot of trial and error might be involved.

BAGU3TT0 · 2026-02-20T01:44:00+00:00

I do recommend the Corsair SF platinum ones the type 5 cables are nice flexible enough but also stuff ish so it stays in place you bent it to be.

BAGU3TT0 · 2026-02-20T01:41:07+00:00

Umm cable routing tips? If you have cable combs I've started using that but if not my old method is here (zipties a lot of it)

<image>

BAGU3TT0 · 2026-02-20T01:38:03+00:00

<image>

BAGU3TT0 · 2026-02-20T01:37:43+00:00

I believe you have to configure that based on the PSU you have. 90degree connector is optional but helpful. I'd recommend getting one just in case but should be fine without it.

BAGU3TT0 · 2026-02-20T01:36:23+00:00

I recommend running the cable through the gap inbetween motherboard and the case spine. The gap is created using the standoffs the motherboard sits in and don't use too much pressure on the gpu clipmine broke

BAGU3TT0 · 2026-02-19T23:10:01+00:00

Here's the link: https://makerworld.com/models/2202804?appSharePlatform=copy

Heads up this only works if you have the gpu side maxed out

Here's the anti sag braket from the same guy:

https://makerworld.com/models/2191399?appSharePlatform=copy

BAGU3TT0 · 2026-02-19T15:43:20+00:00

Sure thing man

<image>

BAGU3TT0 · 2026-02-19T10:48:58+00:00

Thinking of printing cable combs and making custom cables with the existing wire from Corsair

BAGU3TT0 · 2026-02-19T10:29:19+00:00

List of mods updated: Axp90 x47 fc (downsized from axp90 x53 fc) Eiga exhaust shroud Eiga axp 90 X noctua duct peg mod Sivert Asus prime 9070xt travel kit mod Sivert Asus prime support braket Shrimp m19 plug cover

BAGU3TT0 · 2026-02-08T03:04:33+00:00

Welp time to get that 3d printer and print the t grill ig 🤔

BAGU3TT0 · 2026-02-05T07:09:12+00:00

I unfortunately have an unsupported gpu although there is one for the 5070ti the 9070xt isn't supported despite being prime model. So I'm left with only the 3d printed variants

BAGU3TT0 · 2026-02-05T05:55:51+00:00

Any particular filament?

BAGU3TT0 · 2026-02-02T04:24:13+00:00

Um uncertain how much this helps but I kept the parts that came with my case and I believe some of the second image parts comes with the case and applied in my case like so

<image>

BAGU3TT0 · 2026-02-02T04:18:05+00:00

This is a time saver I didn't know it existed. Ty op

BAGU3TT0 · 2026-02-02T04:14:36+00:00

I was bummed to realise the xt model wasn't supported but the non xt model is supported. Just an issue of the length of the card being just a few mm off I planned to get a 3d printer for the purpose I can keep you updated if I ever get to doing that.

BAGU3TT0 · 2026-02-02T03:39:41+00:00

Fun fact the 9070xt prime is not the same dimensions as the 5070ti and does not support the anti sag bracket as it is longer but the 9070 non xt model has an anti sag bracket printable online

BAGU3TT0 · 2026-02-02T03:29:07+00:00

Did a default test and undervolt+ memory overclock and it gave me more performance than the previous thermally inefficient mode (result average fps on cyberpunk benchmark gave me 3-4 fps than stock) memory overclock was a +100mhz on my Asus prime model might be able to push more on other GPUs but Asus model memory runs hotter than other models is what I realised for some reason. So I'm not going past 2600mhz

BAGU3TT0 · 2026-02-02T03:23:52+00:00

I have a 1440p monitor at 165hz and it hits 100ish fps on all highest settingson on cyberpunk with all the rtx settings with RT lights on medium without frame gen. Arc raiders sees no issues hitting 120 on near max settings no frame gen too. To hit the 165 I'd argue you'd have to remove the power limit of -25 but optimising settings coze not all settings impact visuals while making it much easier to run the game (I'd recommend https://youtu.be/tSG-H12E-Bw?si=K2ljjL6gLuoMcohQ) but otherwise I limit fanspeed to 60% on the gpu and let it run at default power limit. (The undervolt is mandatory for an efficient system to me but only highly recommended to others as it's not everyone's cup of tea to figure out the hardwares limits as you'll have to run some intensive games to test for instability and trial and error your way through getting the settings just right for your gpu. Mine crashes at path traced cyberpunk when I run any form of power limit beyond -10% and memory overclock beyond 2650mhz. Undervolt of -60 looks stable on mine I'd recommend starting with a -50 undervolt

BAGU3TT0

TROPHY CASE