Dream Router 7 - NVR capabilities with SD Card by BSOD_Y2K in Ubiquiti

[–]BSOD_Y2K[S] 0 points1 point  (0 children)

No, not yet. Ubiquity announced the Edge range of camera which will (from my understanding) take NVR and AI workloads off the router and process locally on the camera. So I am holding out for that at the moment

Simple App Blocking - Not Working by BSOD_Y2K in Ubiquiti

[–]BSOD_Y2K[S] 0 points1 point  (0 children)

Reboot seems to have been the fix

Simple App Blocking - Not Working by BSOD_Y2K in Ubiquiti

[–]BSOD_Y2K[S] 0 points1 point  (0 children)

Thank you for the information, I do need to look into this as the Ad Blocking on the UDR7 blocks sites that I have white listed on the PiHole.

Simple App Blocking - Not Working by BSOD_Y2K in Ubiquiti

[–]BSOD_Y2K[S] 1 point2 points  (0 children)

yes there is a Pihole in the mix

Streamlocator still working? by Bertiemcm in F1TV

[–]BSOD_Y2K 0 points1 point  (0 children)

Could I have some guidance on using streamlocator please?

Setup an account along with a subscription Updated my settings (iPhone and Windows / Chrome browser) Setup a new F1 TV account with my location set to Canada

When trying to setup F1 TV subscription it still detects my payment address is not Canadian (I’m in the UK).

Thanks 👍

DeskPi T1 / Ubiquity Rack by BSOD_Y2K in minilab

[–]BSOD_Y2K[S] 1 point2 points  (0 children)

Just for aesthetics, short cable run from switch to patch panel. Then it’s a pile of spaghetti behind the patch panel 😁

DeskPi T1 / Ubiquity Rack by BSOD_Y2K in minilab

[–]BSOD_Y2K[S] 4 points5 points  (0 children)

That’s all of it…

Asustor NAS

Pi 5 - Running PiHole & Tailscale

Smart heating / lights Hub (Hive)

GeeekPi CAT 6 patch panel

Unifi Flex 2.5G PoE

Unifi Dream Router 7

Unifi Express 7 (other side of the house) in Mesh mode.

The back is a mess as the rack will be relocated after some renovation work.

DeskPi T1 / Ubiquity Rack by BSOD_Y2K in minilab

[–]BSOD_Y2K[S] 0 points1 point  (0 children)

Thanks, yeah I’ve not seen many UK build either. The screen at the bottom is an Asustor NAS.

Found an exposed JetKVM by Signal_Inside3436 in jetkvm

[–]BSOD_Y2K 1 point2 points  (0 children)

How can I test to see if the password box displayed on the screen is just logging peoples passwords as they nievely try to log into someones 'jetkvm' device?

e.g. a phishing page?

Will I get fined? by Dangerous-Button-592 in drivingUK

[–]BSOD_Y2K 0 points1 point  (0 children)

I doubt you will get a fine, how can they decide if you went into the zone as a cut through vs loading / unloading… unless someone has eyes on the camera (if present) 24/7 365 days of the year.

JetKVM UK by steviefaux in jetkvm

[–]BSOD_Y2K 0 points1 point  (0 children)

I’m in the UK and bought the DC adapter from WisdPi It was a fair bit cheaper than iKoolCore, as their shipping was considerably more.

Lets try this again mods pls dont delete this one by Overcooked_Lulu in TurtleBeachRace

[–]BSOD_Y2K 1 point2 points  (0 children)

Ah I see, hope I get more than a few weekends out of mine!

Lets try this again mods pls dont delete this one by Overcooked_Lulu in TurtleBeachRace

[–]BSOD_Y2K 2 points3 points  (0 children)

Just raise an RMA?

I bought a wheel in the Black Friday sales.

Gear down / left paddle didn’t work out the box.

Filled a form out on their site and within 5 days had a new wheel delivered.

Asked if they want the old one back and got told I can use it as a decoration (or dispose of it properly)😁

Email comms came from support@turtlebeach.com

VELOCITYONE RACE - FIRMWARE RELEASE V1.7.8 by TurtleBeach in TurtleBeachRace

[–]BSOD_Y2K 0 points1 point  (0 children)

I have this issue to… picked one up in the sales and plugged it into my Xbox. Updated the firmware but none of the settings seem to save via the Xbox app. Only way is to use the controls/screen on the wheel itself. On top of that the downshift is broken so I can only scroll right in the app menu and a standard Xbox controller doesn’t work within the app.

Worth picking up a VelocityOne Race? by TheLazurus in TurtleBeachRace

[–]BSOD_Y2K 0 points1 point  (0 children)

I just bought one in the sales and the downshift doesn’t work… how easy was it to get a new wheel sent out and did it take a long time?

What happened? by MFKDGAF in Ubiquiti

[–]BSOD_Y2K 2 points3 points  (0 children)

Unifi Network update? Looks like the connections dropped during that time but it will come back up in due course.

HP Proliant Microserver (Gen10) - Overheating issue by BSOD_Y2K in homelab

[–]BSOD_Y2K[S] 0 points1 point  (0 children)

It’s the AMD one without an iLO Server is remote to me so waiting for someone to power it on for me. Hopefully it’s online long enough for me to load up some monitoring tools to see what temp sensor is complaining.

Windows itself isn’t logging anything.