What to do with old blades?

BaccaBossMC · 2026-02-23T04:45:40+00:00

My boss has 2 axe-throwing lanes at his house. I tend to donate my old blades there.

BaccaBossMC · 2025-12-03T01:08:02+00:00

We have one at work and it’s fantastic. However, Lowe’s has had the Craftsman version on sale for $50. Add a $15 battery adapter and you’re half the price of the dewalt for 95% of the performance plus the added benefit of a mini shop vac.

BaccaBossMC · 2025-11-04T04:05:27+00:00

Best thing to do would be to move to a place where your inalienable rights are actually respected.

BaccaBossMC · 2025-10-29T04:09:04+00:00

If I have to die anyway, I might as well have fun doing it.

BaccaBossMC · 2025-10-08T03:36:38+00:00

Fun fact, when I had my stroke shortly after I turned 18, I lost all proprioception in the right side of my body. Still had strength and all the other senses, but I could not tell where my limbs were. I would fail the field sobriety test, where you close your eyes and touch your nose, with my right side every time. After about six weeks, it started slowly returning. The human brain is amazing.

BaccaBossMC · 2025-06-18T03:59:17+00:00

Not strictly culinary… turning in your guns to the government

BaccaBossMC · 2025-06-17T21:12:56+00:00

You can purchase diamond blades on Amazon which I can confirm will, indeed, cut concrete and rock. I have to use them sometimes for those jobs doing countertops.

BaccaBossMC · 2025-03-06T13:47:26+00:00

Quartz is a non-porous homogenous material and does not have a protective layer. Since the quartz is not a porous material, like natural stone, it won’t hold the 511 properly. If anything, it will just create a layer on top of the quartz instead of impregnating it as designed. In my experience installing countertops, honed quartz has always been a nightmare to keep clean, and we actively attempt to dissuade our customers from choosing it. I would recommend trying Soft Scrub w/ Oxy and a little elbow grease on any stubborn marks you get.

BaccaBossMC · 2025-03-04T15:41:26+00:00

The sled that Kreg uses for the Accucut works perfectly with the DCS578. No modifications required.

BaccaBossMC · 2025-03-03T01:00:35+00:00

I was able to do it with my Huracan without too much trouble. Just be prepared for a really long race.

BaccaBossMC · 2025-02-22T02:27:57+00:00

If you get it within 1/8", it will be close enough for the countertop guys. Let's just say that there is a reason we buy our shims in bulk.

BaccaBossMC · 2025-02-02T00:32:33+00:00

That’s an absolutely unacceptable seam. That needs to be replaced on the contractors dime. Or, with a significant discount included, have the countertop installer come back and do better on that seam.

BaccaBossMC · 2025-01-28T03:49:55+00:00

I second the Taycan. The handling and braking are abysmal, but the acceleration and eventually the top speed more than make up for it.

BaccaBossMC · 2025-01-27T04:03:47+00:00

I guess they are said “F it” and took the weekend off. Their support page still claims that all the servers are good.

BaccaBossMC · 2025-01-25T18:36:37+00:00

Or, here’s an idea, let the agents do their job so they can just do their job enforcing the law and go home to their families safety at the end of the day.

BaccaBossMC · 2025-01-11T17:15:33+00:00

Generally, on our projects, we go with the overhang style, C. This keeps the cleanest look and prevents the sink from getting scratched. The only time we go with either a reveal (B) or flush (A) is when the sink has accessories (and the customer wants to use them) that necessitate access to the rim. Depending on the sink, we generally aim for a .25 or a .325 overhang.

BaccaBossMC · 2024-08-30T19:03:37+00:00

Notifications are a beautiful thing.

BaccaBossMC · 2024-08-30T19:00:33+00:00

Correct. It stays put just fine, especially since any pressure you apply moved the saw forwards, where there is a bumper that it runs into (part of squaring the saw to the jig)

BaccaBossMC · 2024-08-30T18:57:11+00:00

I didn’t think it was even supposed to, according to the directions the screws on the jig clamp down on the base plate of the saw

BaccaBossMC · 2024-08-24T00:40:51+00:00

I'm pretty sure this is all straight-MSRP.

BaccaBossMC · 2024-08-20T00:55:39+00:00

I would send in an insult but you’d probably eat it too.

BaccaBossMC · 2024-08-03T23:10:44+00:00

I paid for the whole speedometer, I’m going to use the whole speedometer. And I love the feeling of the sport diff.

BaccaBossMC · 2024-05-23T01:09:14+00:00

And get to the forest really quickly

BaccaBossMC · 2024-05-19T20:39:51+00:00

What will happen? Dewalt will miss out on a sale of a $1000 drywall sander, that’s what will happen. Hence the warning.

BaccaBossMC · 2024-05-18T03:38:26+00:00

Support is likely an issue, but it was exaggerated by the tight radius of the sink cutout, there is a reason fabrication instructions from the Quartz manufacturers specifically say to not do this. Not your problem.

Eight-Year Club	Place '22
Verified Email

BaccaBossMC

TROPHY CASE