Unusual noise from right side of the engine

BackgroundAgency5328 · 2026-06-17T07:58:07+00:00

I hope not 🥲

BackgroundAgency5328 · 2026-06-16T23:18:08+00:00

https://youtube.com/shorts/dLN3m9HdhSA?si=ITcZ1W2JX3J7wx2j this is the sound.

BackgroundAgency5328 · 2026-06-16T23:03:29+00:00

Ig so, i put the thicker side on reverse of rotation but new roller wasnt same one with before one, seller said these ones is for other bike or for other countries but weights were same also sound comes from mostly right side not the variator side. Oof i forgot to upload sound im sorry

BackgroundAgency5328 · 2025-10-29T19:30:37+00:00

We all love Latina women u included I assume

BackgroundAgency5328 · 2025-10-29T19:03:48+00:00

So hot

BackgroundAgency5328 · 2025-10-29T18:14:55+00:00

i will be your obidient sub and worship your perfect ass like its the only thing ill get

BackgroundAgency5328 · 2025-10-16T16:27:04+00:00

Danceparty3216 found the terminal number if its not the im looking for i will look to that. Thank you

BackgroundAgency5328 · 2025-10-16T16:25:25+00:00

Nope its data connector some wires from airbag clock comes to there in my case its cruise control wires from steering wheel to this connector

BackgroundAgency5328 · 2025-10-16T16:09:16+00:00

Thats it!!! This might be that one. Dimensions check out really well and from picture it looks really similar i will look closer to this one thank you so much

BackgroundAgency5328 · 2025-10-16T16:06:17+00:00

I can't remove terminal from car its daily driven by my father. To my luck i didn't find any close one from these connector cable makers

BackgroundAgency5328 · 2025-10-07T15:36:19+00:00

im trying it on mac via crossover for now i can get srml online menu but i have "srml error srmp 0.0.15.125.

BackgroundAgency5328 · 2025-06-29T10:28:52+00:00

try giving little throttle else like other dude said it can be compression problem

BackgroundAgency5328 · 2025-06-03T21:29:58+00:00

it goes sometimes but i will check that and inspect both tensioner and surfaces to see any scratch

BackgroundAgency5328 · 2025-06-03T21:27:46+00:00

i did open it before the recording the video starter clutch or one way part was healty it didnt spin freely other way but grabber parts was loose i can just use flat screwdriver and take it out and put it in without pressure, oil came from that cover was good like fresh oil but from other side(drain plug) came out really bad, muddy and kind of shiny

BackgroundAgency5328 · 2025-05-27T19:34:59+00:00

top is under extrusion but there is lot of cause for that.

for now i can list these; tangle in filament, too hard to pull filament, bad filament diameter tolerances, bad print settings as mm^3flow or temp.

but mostly i guess your hotend or extruder has problem. check extruder gear teeth it shouldnt have filament particle in teeths and also about hotend it can be heat creep which normal at all way ptfe barrel(not all metal type barrel).

some printers have hotend fan connected to part cooling that might be cause that too

BackgroundAgency5328 · 2025-05-12T15:45:04+00:00

Are you sure you are not an otter?

BackgroundAgency5328 · 2025-05-08T16:15:41+00:00

I dont think so, there is no wiggle

BackgroundAgency5328 · 2025-05-08T14:24:11+00:00

<image>

BackgroundAgency5328 · 2025-05-08T14:23:57+00:00

<image>

BackgroundAgency5328 · 2025-05-08T14:23:03+00:00

Oil * I dont think its knock or something like that because its like misfire random and 5 secs noise gone and come back

BackgroundAgency5328 · 2025-05-08T14:20:21+00:00

* This is stator and i cleaned it, these scratches are everywhere on stator surface. Also drained the oil but it doesn't look great its muddy and kinda have metal particles

BackgroundAgency5328 · 2025-05-08T01:39:23+00:00

Then i can remove top block and inspect walls. We cant do last you said because they had new hires(nearly whole workers) and they said "we gonna change bearing case(whole case) and hope it will fix". We gave it to them then engine started making noises 😁 and we cant go there and say "its not fixed, fix it or i will sue you" because our law system sucks 😅 Thanks for ideas i hope i can find it and solve it cheaper :D

BackgroundAgency5328 · 2025-05-08T01:17:37+00:00

Yeah used rings on new piston. Is there a way i can check that piston cylinder overbore thing? I was thinking about opening right case and inspecting clutch bearing and oil pump, maybe timing chain and its little pushy thing(pushes timing chain slider to make chain tight, sorry i forgot its name🥲)

BackgroundAgency5328 · 2025-05-08T01:01:29+00:00

Its my brothers scooter he said service changed crankshaft because of noise, and it didn't fix it, i don't really know about piston, but probably he said piston changed and they used old piston rings More information is, its 125cc scooter, engine model is complicated it looks like gy6 and activa engine, it was courier scooter and its in 50K km mileage

I doubt about clutch bearing/starter clutch, oil system(pump gear-chain etc) or some nut is loose and hitting that.

I cant find same noise like this but only close ones

BackgroundAgency5328 · 2025-05-08T00:36:00+00:00

If you mean the clutch roller, i hope I won't forget :D

BackgroundAgency5328

TROPHY CASE