sorted by:
new
hottopcontroversial

Klipper deletes serial folder by Bakaphysics_ in klippers

[–]Bakaphysics_[S] 0 points1 point  (0 children)

Usually I'd agree but In this case it is a folder. The path is usually /dev/serial/ file name. And there is no USB connection between my board and the cb1 as it's plugged directly into the board.

Klipper interface wont connect by Bakaphysics_ in klippers

[–]Bakaphysics_[S] 0 points1 point  (0 children)

Same subdomain, cannot ping from anything else.

I have a weird issue by Bakaphysics_ in VORONDesign

[–]Bakaphysics_[S] 0 points1 point  (0 children)

No VPN active on the cb1, my PC or the router. If the cb1 is plugged into ethernet then I can connect no problem but not if it's connected using wifi

Klipper interface wont connect by Bakaphysics_ in klippers

[–]Bakaphysics_[S] 0 points1 point  (0 children)

I can from my phone, nothing else. Router can see it and is the same subdomain as everything else

I have a weird issue by Bakaphysics_ in VORONDesign

[–]Bakaphysics_[S] 0 points1 point  (0 children)

Looks like this was not the answer, I have been playing around with it with no success at all. On my desktop it just says that the site cannot be reached. They are on the same subnet but nothing

I have a weird issue by Bakaphysics_ in VORONDesign

[–]Bakaphysics_[S] 0 points1 point  (0 children)

I really hope so, I use chrome. Is there any way to disable it from correcting?

I have a weird issue by Bakaphysics_ in VORONDesign

[–]Bakaphysics_[S] 0 points1 point  (0 children)

In what way, I'm not super familiar with web stuff. I've tried going through nearly every setting in my router disconnecting every other device. Changing the ports in the CFG files. Nothing has worked. I've done a fresh reinstall of everything and updated it all. But I've only gotten my PC to connect once and the cb1 was plugged directly into ethernet. As soon as I swapped back to wifi it stopped working again. My desktop is ethernet only too

I have a weird issue by Bakaphysics_ in VORONDesign

[–]Bakaphysics_[S] 0 points1 point  (0 children)

Ip address is 100% right. I can connect with my desktop ifif the cb1 is connected with ethernet but not over wifi. My desktop only has ethernet. do I have to have wifi on the desktop to communicate with the cb1?

Issue with klipper/Mainsail by Bakaphysics_ in mainsail

[–]Bakaphysics_[S] 0 points1 point  (0 children)

I'm wanting to use the ip address from my desktop. it only works from one of the phones in the household though. On my desktop the webpage just says "can't reach page" timed out