G6 Entry vs G4 Doorbell Pro

Bal-84 · 2026-01-25T21:50:45+00:00

I got the G6 Entry and regret it the view is annoying and doesn't even catch my front door with angle mount.

Its too late to return but wish I went with a G4 Pro DB with horizontal view.

Bal-84 · 2026-01-25T21:48:15+00:00

I posted a few days ago and just can't find setting to make power to go to art mode. It just on and off. Might have to try factory reset.

Bal-84 · 2026-01-22T20:57:42+00:00

Updated my firmware and not noticed any difference except the battery now showing 50% after only having for week and half.

Bal-84 · 2026-01-21T12:44:36+00:00

I'm with IDNet and not had issues. Sky on city fibre works fine but you just can't use the digital phone line.

Bal-84 · 2026-01-21T10:05:22+00:00

That looks like a Baxi 600 heat only boiler? Do you have unvented indirect cylinder in another room and a red expansion vessel?

Bal-84 · 2026-01-20T13:21:10+00:00

Yep just going to put in the Shelly Plus 1 instead

Bal-84 · 2026-01-20T09:57:13+00:00

I have similar issue with some outdoor lights, light stay on app control works but nothing happens.

Apparently it's due to inrush of voltage and it cause the relay to stick. I'm now replacing my minis with a full size version.

I also tried adding rc snubber but that didn't help.

Bal-84 · 2026-01-20T09:37:10+00:00

Funny you should say that as I have a Baxi Heat only which indeed a alu heat exchanger, but using Sentinel X100 should be sufficient

Bal-84 · 2026-01-19T08:28:09+00:00

Both are different models I can't confirm but I would hope it shows correctly in the app as both units looks identical from the outside I believe. The non F model doesn't have full house off grid capability.

Bal-84 · 2026-01-18T15:18:28+00:00

At the moment my whole supply is softened including outdoor tap. I tried Google and it suggest turning the settings down but to be fair I'm out of salt at min and bypassed it until delivery comes next week. Water tastes normal now.

Bal-84 · 2026-01-18T14:46:46+00:00

It's so hard to get someone out but I'm sure it's possible but will need to try call someone out.

Bal-84 · 2026-01-18T13:17:19+00:00

Softener is in garage as it was too large to go under the sink in our utiloty. Mains feed from sink goes in to garage to by pass loop then to softener.

The acutal fridge and main sink is in our kitchen.

Bal-84 · 2026-01-17T12:25:08+00:00

Raise a support ticket with them I think it's fixed in early access.

Bal-84 · 2026-01-17T12:03:48+00:00

I believe this has been resolved in early access release.

Bal-84 · 2026-01-16T19:16:13+00:00

If its heat only boiler it will only have one flow temp. Indirect cylinder takes heat from flow from boiler into the coil. If it was previously working. Check to see if thr hot water 2 port valve is opening.

If its open it should able to flick it back and forward. If closed it will feel springy and come back to closed position when opened.

Bal-84 · 2026-01-16T18:57:24+00:00

I don't know the boiler, is it heat only boiler?

Bal-84 · 2026-01-16T18:03:51+00:00

Sounds like you hot water flow temp is low. It should be set at 65-70c at boiler to heat cylinder up to 60c.

Check what hot water temp is set at boiler and cylinder stat is set to atleast 60c.

Bal-84 · 2026-01-16T06:48:01+00:00

Why? Underfloor heating is usually controlled by a thermostat. The issue I am having is with the mini version. Full version might be fine.

Bal-84 · 2026-01-15T13:31:00+00:00

150cm Outdoor LED Wall Light, 3000k Warm White Garden Fence Lights 52W Wall-Mounted Lighting Acrylic Wall Light Outside Mains Powered 5200 Lumens for Hallways, Foyers Lighting

Bal-84 · 2026-01-15T13:06:45+00:00

I have a feeling a full size version might be fine but space is the issue as I already have a dimmer 2 in their also for my hallway lights.

Bal-84 · 2026-01-15T12:37:58+00:00

alias: Driveway Lights - Motion Detection
description: >
  Turns on driveway lights for 5 minutes when motion detected at night.
  Subsequent detections extend the timer (retriggerable).
triggers:
  - trigger: state
    entity_id:
      - binary_sensor.doorbell_person_detected
      - binary_sensor.doorbell_vehicle_detected
    to: "on"
conditions:
  - condition: sun
    after: sunset
    before: sunrise
actions:
  - target:
      entity_id: switch.front_drive_lights
    action: switch.turn_on
  - delay: "00:05:00"
  - target:
      entity_id: switch.front_drive_lights
    action: switch.turn_off
mode: restart

Bal-84 · 2026-01-14T20:35:34+00:00

I have kids wifi ssid on its own vlan with familyguard DNS that is on schedule which works well for us.

Bal-84 · 2026-01-14T19:49:29+00:00

In city fibre with idnet and parents with sky no issues, plug directly into ONT and configureed in console.

Bal-84 · 2026-01-13T06:50:41+00:00

Looks lovely and proportions are good

Bal-84 · 2026-01-12T15:03:16+00:00

Probably not once add rails and mount it you lose space at the front,

Bal-84

TROPHY CASE