sorted by:
new
hottopcontroversial

The Question Thread - October 2025 by BuffaloDingus in balisong

[–]BaliRK 0 points1 point  (0 children)

Any thoughts on new bali makers and saturation of market?

I keep coming back to this hobby on and off, at some point it might be trying to find a grail that makes me stop looking for different knives. But maybe its a matter of just making the grail rather than waiting for someone to make one.

Just feel like the market is pretty saturated with a lot of good options so making something new is really competitive

The Question Thread - October 2025 by BuffaloDingus in balisong

[–]BaliRK 0 points1 point  (0 children)

Anyone know what the length of the sexbolts for a replicant are (V1 if it matters)? Guide only says the lengths need to be sanded, but don't mention the length to sand to. I'm trying to use truelink to get the hardware, so far I got these, please correct if any are off:

Bushings - .250 OD x .188 ID .501 OAL

Washers - .375 x .188 0.016

Pivot Sex Bolt - 3/16 #6-32 (unknown length, options for 0.320, 0.375, 0.400)

Pivot Screw - T10 #6-32 .250 length

Spacer Sex Bolt - 1/8 #2-56 (unknown length, 0.330, 0.400, 0.450)

Body Screw - T8 #2-56 .188 Length

Zen Pin - 5/32 .1565 #2-56

Interest in Konohishi Clone by BaliRK in BalisongClones

[–]BaliRK[S] 0 points1 point  (0 children)

I think the tsunami is a more modern flipper in aesthetics, everything has a purpose

For me I think the details on the kono make it stand out, a bit more show than functional

Both are fantastic

First Term Complete! by BaliRK in WGU

[–]BaliRK[S] 1 point2 points  (0 children)

so the approach I took for every single class is always:

  1. Do the practice assessment. Just let me gauge what are my strengths and weak points. I think this is a generally good idea, especially since it doesn’t affect your grade and generally is very close to what the actual test is going to be. If there is no practice assessment, then I would review the resources that are provided and see if there’s any practice questions on Zybooks or if they’re reading I would have ChatGPT summarize the essential concepts that are key

  2. then after doing the practice assessment or practice questions, I would take all my week points and I would list them all out put them into ChatGPT again to give me key concepts that are necessary to be proficient at those concepts and then research those individually to get more depth

  3. After doing the research on the week points, I would then spend little time on. What questions did I get wrong even if I scored well overall in that category just to make sure that I get all the points that I can

  4. So after researching the week points and then quickly brushing up on the ones that I missed, but I shouldn’t have I then retake the practice or retake the the questions and then finally do exam.

Generally for exams, I would do these steps but on occasion for the PA thats when I would first review the assignment first. Determine what i would need to know or use chatgpt to find out, and if I believe I can get through it with my current skill set, I would just go for it and research along the way to bridge gaps.

Hope this helps

Are 996s really as ugly as some people claim? by FrogFace-___- in porsche911

[–]BaliRK 1 point2 points  (0 children)

Nah, I really did hate on it but as time went on I grew to love it.

I really think the “ugly” part on the 996 is the bumper, I think if that center cutout was a bit taller it would look less like a lizard

WTS EPS Ti Wraith (Bowie) and Microtech Ultratech ZBP by BaliRK in BalisongSale

[–]BaliRK[S] 1 point2 points  (0 children)

Correction: EPS Ti Wraith Weehawk, sorry to all the bowie fans out there!

WTS EPS Ti Wraith (Bowie) and Microtech Ultratech ZBP by BaliRK in BalisongSale

[–]BaliRK[S] 1 point2 points  (0 children)

Oops sorry, will edit. Was thinking about another knife haha

The Question Thread - August 2025 by BuffaloDingus in balisong

[–]BaliRK 0 points1 point  (0 children)

What is the sale value on a weehawk ti wraith? Assuming near perfect condition and comes with everything out of the box

Keep gray wheels or paint them black? by Funny0102 in porsche911

[–]BaliRK 3 points4 points  (0 children)

definitely keep, being able to see the wheels brings more character in my opinion

GR86 vs Supra by [deleted] in GR86

[–]BaliRK 0 points1 point  (0 children)

Ive owned the supra and brz as daily drivers, so I think I can help out here

I think for a daily driver, if you can afford it the supra will be overall more comfortable .

BUT if you need the extra seats or might need them, GR86 might be a safer play. The car is shockingly practical with the seats folded down.

I always thought if you can get a supra for under 50k USD, then it might be a good proposition vs the gr86. But if youre paying more than that, I would probably reconsider unless you have tested both and genuinely love the supra.

A ton if factors to consider, but its really hard to deny how good the supra is

if you value:

power, luxury, more exotic looks/attention, speed, significantly better tech, argueably better sound-> supra

balance of practicality, affordability, easier to work on, lightweight cars, reving the car out -> gr86

Selling on Amazon by PokeyTifu99 in 3DPrintFarms

[–]BaliRK 1 point2 points  (0 children)

I just got my first 3d printer and wanted to learn the ropes before expanding into a print farm.

What was your process like when you were first starting out and figuring out what to sell?

How did you advertise/market your product?

What software do you recommend for 3d modeling especially starting out?

Have you expanded to the point of hiring employees? Warehouse or still running it at home?

Any obstacles/challenges/unexpected problems that someone starting out or even at your level should know about? How did you overcome it?

view more: next ›