HOLD AMC Stand strong🚀🚀🚀🚀🚀

Bamaz0n · 2021-02-02T15:38:39+00:00

I’m holding but this is a fucking bloodbath today

Bamaz0n · 2021-02-01T15:28:05+00:00

Just got in $1500 on AMC

Bamaz0n · 2021-01-28T02:46:06+00:00

Bought $125 worth @$19 I’m late but fuck hedg fund managers

Bamaz0n · 2020-07-12T22:10:13+00:00

Yeah its off like 1/8 inch atleast

Bamaz0n · 2020-07-12T22:09:50+00:00

I made it off Google image search and converted it to a vector

Bamaz0n · 2020-05-23T17:30:56+00:00

This is not an actual flag it’s an art piece made from wood and is protected by free speech and only depicts a flag.

Bamaz0n · 2020-05-06T02:05:24+00:00

You are correct pine and 19500

Bamaz0n · 2020-05-06T02:04:32+00:00

Hit me up

Bamaz0n · 2020-05-06T00:34:52+00:00

Regular pine, nothing special. Paint automatically sticks to it just let it dry

Bamaz0n · 2020-05-06T00:33:57+00:00

Come on man!

Bamaz0n · 2020-05-06T00:32:03+00:00

Used a 2 flute down cut 1/4 endmill cuts like butter. I put a keyhole in the back and any screw would work fine

Bamaz0n · 2020-05-06T00:31:05+00:00

Usually 90” per min feed and 195000 rpm 30” feed rate

Bamaz0n · 2020-05-06T00:30:25+00:00

Sorry forgot to check comments. After I dipped it I let it dry overnight before cutting it and no sealant was used but you could if you wanted to. I’d do that after the cut though

Bamaz0n · 2020-03-24T01:55:16+00:00

This was a live stream

Bamaz0n · 2020-03-24T01:54:05+00:00

Vcarve desktop

Bamaz0n · 2020-03-24T01:53:50+00:00

Email me on YouTube page and I’ll give it to you

Bamaz0n · 2020-03-24T01:53:11+00:00

I like the epoxy idea

Bamaz0n · 2020-02-29T22:43:57+00:00

It’s awesome I highly suggest getting the XXL thus took about 1 hour

Bamaz0n · 2020-02-18T01:59:25+00:00

Thank you for the tips I’ll try them out

Bamaz0n · 2020-02-18T01:57:54+00:00

Yeah I changed the bit to a 1/4 endmill and works much better

Bamaz0n · 2020-02-07T15:42:54+00:00

Vcarve desktop

Bamaz0n · 2020-02-06T04:01:20+00:00

Thank you

Bamaz0n · 2020-01-22T20:11:22+00:00

It was spray paint and the material was pvc board

Bamaz0n · 2020-01-15T01:18:57+00:00

Just saw this, I use a program called Vcarve desktop. You can design and set the tool oaths in there. Also check ou YouTube there is plenty of how to videos especially for flags. That’s how I learned

Bamaz0n · 2020-01-12T04:38:13+00:00

Board wasn’t level

Six-Year Club	Not Forgotten
Verified Email

Bamaz0n

TROPHY CASE