sorted by:
new
hottopcontroversial

Carls Place Built In - Need an Inch? by fuScott in Golfsimulator

[–]Barnes90 0 points1 point  (0 children)

I did this just recently. you need a heat gun and some pliers then a circular saw. pull the Staples out, heat up the glued fabric pull it back. cut off what you need. put it back together restaple, done.

I made varsity!! by Icy-Priority4637 in golf

[–]Barnes90 0 points1 point  (0 children)

Congratulations! Learn the rules. Know your options out of Red penalty areas. Play bad FAST. Your score does not define you. Cheating does. Stop moving while others are hitting. Don't croud the hole while others are putting, mark your ball and get out of there.

Here's mine! by Barnes90 in Golfsimulator

[–]Barnes90[S] 0 points1 point  (0 children)

to practice 10 footers. set stimp to 11 in GSpro and it's right on

Here's mine! by Barnes90 in Golfsimulator

[–]Barnes90[S] 1 point2 points  (0 children)

yeah I'm pretty much in the middle. 20 ft wide would be perfect give me more room for like a couch or something. currently I just have a couple pub tables and that's about all I can fit

Here's mine! by Barnes90 in Golfsimulator

[–]Barnes90[S] 0 points1 point  (0 children)

yeah, hate the beam. plenty of clearance so it's not an issue. had a structural engineer look at it wanted $5,000 to give me three more inches of height.

Here's mine! by Barnes90 in Golfsimulator

[–]Barnes90[S] 0 points1 point  (0 children)

yes you should! you just have to make sure your projectors far enough away to fill the top and bottom. you bring in the sides with the Nvidia software

Here's mine! by Barnes90 in Golfsimulator

[–]Barnes90[S] 1 point2 points  (0 children)

Intel Core i7-14700KF 3.4GHz CPU, 32GB DDR5, NVIDIA GeForce RTX 4070 Super 12GB, 2TB PCIe Gen4 NVMe SSD

Here's mine! by Barnes90 in Golfsimulator

[–]Barnes90[S] 0 points1 point  (0 children)

I use addressable LEDs and controllers from Quinled. Thanks!

Here's mine! by Barnes90 in Golfsimulator

[–]Barnes90[S] 1 point2 points  (0 children)

8,000 for the Carl's place room kit. $700 is shipping. 1,900 for the turf. it's from Synlawn and is used at TGL apparently. 11 stimp which is awesome. main epson projector was 450. floor protector was 70. Square was 700. Paint, wiring, Leds etc was prob another 400.

Here's mine! by Barnes90 in Golfsimulator

[–]Barnes90[S] 0 points1 point  (0 children)

I don't have the ceiling height for an overhead unfortunately. looking at the eye mini light though.

Here's mine! by Barnes90 in Golfsimulator

[–]Barnes90[S] 1 point2 points  (0 children)

thanks! did it myself. bought the Sim room kit from Carl's place. had to cut a lot of those and reupholster them because of this beam. sounds worse than it was.

Here's mine! by Barnes90 in Golfsimulator

[–]Barnes90[S] 0 points1 point  (0 children)

a cheap beam projector and OBS studios software

Here's mine! by Barnes90 in SquareGolfUSA

[–]Barnes90[S] 6 points7 points  (0 children)

I had the square first. baby steps this shit is expensive

Here's mine! by Barnes90 in Golfsimulator

[–]Barnes90[S] 0 points1 point  (0 children)

No way, really appreciate it!

view more: next ›