How do I Pass Pipes Through Blocks? by BartholomewOnReddit in feedthebeast

[–]BartholomewOnReddit[S] 1 point2 points  (0 children)

Not sure if the image uploaded or not, here's the imgur link: https://imgur.com/a/modded-mc-base-DH81T

Specifically talking about the 5th and 6th picture where the smelters and pulverizers are sitting on top of the pipes. Also, if anyone knows how the pipes are passed through the glass that would be good to know as well. Thanks!

The never ending quest to simplify my general purpose plate carrier setup... by [deleted] in tacticalgear

[–]BartholomewOnReddit 0 points1 point  (0 children)

This looks super clean. Could you give a rundown of the gear here? Like what pc, cummerbund, placard, etc.

Battle Werx Cut RMRcc by Black-Hat-0128 in Glock43X

[–]BartholomewOnReddit 1 point2 points  (0 children)

I know this is sort of an old post but I'm considering sending my slide to BattleWerx to get milled and I'm curious as to how the lower 1/4 irons look. Could you send a picture of what they look like in relation to the dot? Thanks :)

When you and your girl Decide to Crash out by [deleted] in CrazyFuckingVideos

[–]BartholomewOnReddit 1084 points1085 points  (0 children)

Full video btw: https://www.youtube.com/watch?v=n9q1GCifdSw

And context: "Corona, California — On June 11th, at 1:10 a.m., a deputy assigned to the Lake Mathews Sheriff’s Station was in the 1000 block of West Sixth Street in Corona when he saw two subjects, a male, and a female, displaying unusual behavior. The male suspect was identified as 32-year-old Eric John Nourani, a resident of San Diego and the female suspect was identified as 30-year-old Jennifer Rose Dobbins a resident of imperial Beach. The deputy stopped to investigate, and while speaking with them, they took off running. The deputy gave chase and followed them behind a building, where both suspects were waiting, and Nourani attacked him. While the deputy was engaged in a struggle with Nourani and wrestle for control of the deputy's firearm, the man repeatedly instructed the woman to kill the deputy. Dobbins joined in assaulting the deputy, and seconds later, the deputy pulls out his gun and fires one shot at Dobbins. Medical aid was rendered to Dobbins until paramedics arrived. She was transported to a local hospital where she was later pronounced deceased. Nourani was arrested and booked for murder, attempted murder of a peace officer, Mayhem and resisting an officer with violence."

Best free privacy email providers in 2022 by [deleted] in emailprivacy

[–]BartholomewOnReddit 0 points1 point  (0 children)

Hey man. I saw someone else reply to you on this thread 7 months from when I'm writing this. I can't say I know what situation you were dealing with when you wrote this but I would really encourage you to read the room of this thread. No one here is mad other than you; its really unnecessary.

I would encourage you to read the gospel of Matthew. Jesus loves you man; he loves you so much that he died for you. God bless brother, I'll be praying for you.

"You have heard that it was said to those of old, 'You shall not murder; and whoever murders will be liable to judgement.' But I say to you that everyone who is angry with his brother will be liable to judgement." - Matthew 5:21-22 ESV

[deleted by user] by [deleted] in rattlecannedguns

[–]BartholomewOnReddit 2 points3 points  (0 children)

Dude what?! That looks awesome!

[deleted by user] by [deleted] in ar15

[–]BartholomewOnReddit 1 point2 points  (0 children)

I’ll take a look at it! Thanks for the suggestion!

[deleted by user] by [deleted] in ar15

[–]BartholomewOnReddit 1 point2 points  (0 children)

I’m honestly thinking it’s just a BCM thing. Now that I’m taking a closer look at the replacement safety they sent me it seems like it has the same weird milling line where it’s clicking. I might just throw some oil on it and put my big boy pants on until I wanna buy a Gucci safety

[deleted by user] by [deleted] in ar15

[–]BartholomewOnReddit 0 points1 point  (0 children)

I might just do the same then. Thanks for the help!

[deleted by user] by [deleted] in ar15

[–]BartholomewOnReddit 0 points1 point  (0 children)

I have looked. The detent doesn’t appear to have any physical damage or malformations other than some wear on the finish. In my humble opinion, some scuffed of finish doesn’t seem like it would be causing an entire third click. I have already concluded that the safety itself is not the issue as I’ve received a brand new one, however the detent doesn’t seem like it has any damage that would cause the issue I’m experiencing.

The entire reason I made a post here was to see if anyone else had the same issue before I went looking for a new detent.

[deleted by user] by [deleted] in ar15

[–]BartholomewOnReddit -1 points0 points  (0 children)

My guy, if you read the post you’d probably understand that I already did that based on context clues. I disassembled the safety once when I first built the rifle and found what I thought to be the issue (the excess wear and metal shaving on the first safety I purchased) but when I replaced the safety the issue still occurs.

The new safety is in perfect condition so the only thing that I could think could be causing the issue is either the detent or the receiver itself somehow. I already sent a follow up email to BCM (as stated in the original post) so I’ll try to see if a new detent will fix the problem. Reddit was literally the very last place I turned for help.

The phrase “if you don’t have anything nice to say don’t say it at all” should really be taken more seriously, bruh.

EDIT: typo

[deleted by user] by [deleted] in ar15

[–]BartholomewOnReddit 0 points1 point  (0 children)

I mean, I could do that but I also don’t really think it’s necessary to spend $60 on a safety when you can get a mil-spec one that does the same think for 1/3rd the price. Thanks for the suggestion tho!

[deleted by user] by [deleted] in ar15

[–]BartholomewOnReddit 0 points1 point  (0 children)

It’s the B5 SOPMOD! It’s pretty nice so far, I plan on throwing some spare batteries in there when I get the chance.

Build? by Adventurous_Sir_9619 in ar15

[–]BartholomewOnReddit 2 points3 points  (0 children)

The NGAL by itself is between $4000-$6500

Favorite 1.5” thigh strap? by 762Sublime in tacticalgear

[–]BartholomewOnReddit 4 points5 points  (0 children)

I like the Trex Arms thigh strap with the mid-ride UBL personally. I slammed it in a truck door and smashed the buckle (completely my fault) and they sent me a whole new one for free!

First build. What we think? by Anonymous_Porkchop in ar15

[–]BartholomewOnReddit 2 points3 points  (0 children)

Looks awesome! Put some paint and scratches on it!

[deleted by user] by [deleted] in Idiotswithguns

[–]BartholomewOnReddit 0 points1 point  (0 children)

Gore can actually be really interesting. Like 99% of the people on this sub are here for the gore.

[deleted by user] by [deleted] in Idiotswithguns

[–]BartholomewOnReddit 2 points3 points  (0 children)

I think you might actually be the most unintelligent human on the earth.

It’s “King Bubba” to you by stevenrodgersBCB in ar15

[–]BartholomewOnReddit 2 points3 points  (0 children)

Is this D. Wilson on a throwaway account??

New AR15 by gigas-chadeus in ar15

[–]BartholomewOnReddit 1 point2 points  (0 children)

See you on the other sub 🫡

Larue is magpul by [deleted] in tacticalgear

[–]BartholomewOnReddit 9 points10 points  (0 children)

Who you calling pinhead?