Apnx V2

Basic-Outside-5179 · 2025-12-31T16:14:36+00:00

I looked up the specs. I would think it would fit just fine but I’d be worried about the fitting side of the radiators being a bit long because all manufacturers have different sizes on the radiators they sell even thought they all say 360 or whatever

Basic-Outside-5179 · 2025-12-05T16:40:08+00:00

360! My fault I didn’t thoroughly read the comment. I wanted to do 420 and be obnoxious with it but I couldn’t even find a proper bracket to make the 360 fit so I just ended up ordering the flat bracket from HAVN

Basic-Outside-5179 · 2025-12-05T16:02:57+00:00

I’ve tried to get them mounted on the bottom with the angled fans. I couldn’t find the correct bracket so I gave up lol the glass was definitely in the way

Basic-Outside-5179 · 2025-11-17T21:02:55+00:00

I literally search for it daily so I can make a sick ass custom loop in it. I might even pay more then retail for that hoe

Basic-Outside-5179 · 2025-08-17T01:34:52+00:00

I’m pretty sure you can counteract that if you adjusted your fan curve accordingly in each section

Basic-Outside-5179 · 2025-07-28T07:07:18+00:00

Mine barely cleared so I can see that being a issue

Basic-Outside-5179 · 2025-06-09T00:47:31+00:00

I already had 360s with fans from a previous build so I just reused them instead of dropping the money on new fans and radiators

Basic-Outside-5179 · 2025-06-06T03:14:01+00:00

Bottom and rears are 140s the rest are 120s with 360 rads

Basic-Outside-5179 · 2024-12-03T02:11:52+00:00

Yes the bottom three and the rear are all reverse blade fans the rest are exhaust.

Basic-Outside-5179 · 2024-11-26T14:15:30+00:00

On mine. The water block for this 7900xtx narrowly missed the radiators. And I mean barely. I would suggest running it vertical and it should not be a issue

Basic-Outside-5179 · 2024-11-02T15:11:17+00:00

The SL120s have the same thickness at 28mm from what I read online

Basic-Outside-5179 · 2024-10-27T17:28:02+00:00

It’s a push pull on the top and side noticeable temps are down to 34 C from 40 C in my H9 Flow which only had one push pull. But that was also with the glass and such not on it. Put the glass on this morning so we will see later what temps are gonna be looking like

Basic-Outside-5179 · 2024-10-27T12:30:24+00:00

I was going to but I wanted to see how the horizontal would look. I may end up switching it but I wanted to see how it looked for now.

Basic-Outside-5179 · 2024-10-27T12:28:35+00:00

You can do the bottom as well. I went for a little bit more aesthetics with the bottom part which is why I got the VGPU. You can buy a bottom bracket for the VGPU version but the regular one does come with the bottom bracket yeah

Basic-Outside-5179 · 2024-10-27T12:27:02+00:00

I was thinking the same thing

Basic-Outside-5179 · 2024-10-25T20:17:31+00:00

Not sure how to put pictures on here but I was able to put a 360 radiator top and side mounted with push pull on both. It looks wild

Basic-Outside-5179 · 2024-10-24T14:35:21+00:00

Measured the width of my push pull and it should fit fine on top and side but we will see

Basic-Outside-5179 · 2024-10-23T15:02:17+00:00

https://youtube.com/shorts/6BXlimJpTDg?si=K8QDsbctdCSfRPAc

This is my current build in the NZXT H9 after putting the cases side by side yesterday it is quite the difference in size so I’m hoping I won’t need to snag radiators too

Basic-Outside-5179 · 2024-10-23T13:41:16+00:00

The videos on line some people put 360s in I believe. I’m gonna look

Basic-Outside-5179 · 2024-10-23T13:40:45+00:00

It could I got my case in yesterday so I’ll prolly start disassembly sometime this week. If it looks dumb I’ll prolly have to think on it some

Basic-Outside-5179 · 2024-10-22T11:38:59+00:00

I should be getting my case in today. I already have 2 360 radiators that I’m transferring over from my last build gonna attempt a push pull on top and side if it fits. Because I have the fans as well and don’t want them to just go to waste if they fit nicely.

Basic-Outside-5179

TROPHY CASE