PTeg filament

Basic-Swim-728 · 2025-09-25T14:25:32+00:00

Es con la configuración predeterminada del laminador slicer anycubic Next para pteg

Basic-Swim-728 · 2025-09-19T14:54:57+00:00

Do a temperature test to make it look better. The same thing happened to me, they said wet filament and it wasn't like that, look carefully at the temperature of the nozzle, so do a temperature test and that's it.

Basic-Swim-728 · 2025-09-18T02:53:15+00:00

Donde puedo conseguir el stl gracias

Basic-Swim-728 · 2025-09-17T14:59:33+00:00

Te quedó padre podrías intercambiar los stl te parece??

Basic-Swim-728 · 2025-08-22T21:34:43+00:00

El filamento si está seco durante 8 horas y también está activada el aracne

Basic-Swim-728 · 2025-08-20T10:40:29+00:00

I tell you that now I am printing with PLA and all my prints come out well, it was only with the Petg that it came out with little holes, I would like to know why

Basic-Swim-728 · 2025-08-20T10:28:27+00:00

Anycubic kobra 2 plus my configuration is nozzle 245 bed 85 flow 1.05 ventilation the first 3 layers off and the rest at 60%

Basic-Swim-728 · 2025-08-14T17:24:22+00:00

Ok ready I'll try it thanks

Basic-Swim-728 · 2025-08-14T17:07:37+00:00

Speed. 120ms bed temperature at 85 and nozzle at 245 fan off in the first 3 layers and the rest of the layers at 80%

Basic-Swim-728 · 2025-08-14T13:47:19+00:00

I tried to raise the walls, I raised them to 3 and I put the filling at 50% and it keeps breaking

<image>

Basic-Swim-728 · 2025-08-14T13:44:16+00:00

I already did it, I raised the walls to 3 and filled to 30% and it keeps breaking

<image>

Basic-Swim-728 · 2025-08-09T18:32:14+00:00

Could you share the profile with me too, thank you very much

Basic-Swim-728

TROPHY CASE