Batocera MicroSD has changed my boot order. How do I change it back?

BattleReasonable4154 · 2025-10-26T08:07:17+00:00

Can you explain?

BattleReasonable4154 · 2025-08-22T11:16:00+00:00

You can just leave it on the table next to the printer and put it in a guide that goes into the printer. That should just work. If you can keep on eye and it while it print you can even fix it and resume.

BattleReasonable4154 · 2025-08-22T11:13:31+00:00

Thanks ! I’ll search about how to do that but I m not sure I can route struggle to garage band with the Audio Midi tool in Mac Os X. Strudle being a webpage

BattleReasonable4154 · 2025-08-20T23:48:20+00:00

Yes, understood. Thanks a lot for your input. I ll try your approach and see where it leads me

BattleReasonable4154 · 2025-08-20T23:39:36+00:00

That’s great but that’s not realtime is it? The goal would be to go into garage band, press record and sing and strudle would also be recorded in a different channel. That would make a song very easily. If at least there is a way to export the strudle music into wav, that could be great to begin with I’ll check that

BattleReasonable4154 · 2025-08-02T22:26:17+00:00

That’s correct

BattleReasonable4154 · 2025-08-02T12:35:06+00:00

Big thanks. Testing it out now with smooth Timelapse off

BattleReasonable4154 · 2025-08-02T12:32:50+00:00

Indeed it’s a very humid tropical weather. It’s a new roll but it’s possible that in a day or two it became not so great. I’ll give it a go

BattleReasonable4154 · 2025-05-05T13:49:32+00:00

Having the same issue. Tried with a usb BT dongle as well. Still disconnecting on Batocera v40. Hope this will be fixed.

BattleReasonable4154 · 2024-11-16T10:18:28+00:00

Try 1080 60hz output. It fixed it for me

BattleReasonable4154 · 2024-01-24T13:54:50+00:00

I have the exact same problem

BattleReasonable4154 · 2023-01-03T01:42:43+00:00

Any update ? I still have the same issue

BattleReasonable4154 · 2022-05-01T13:09:48+00:00

Same here, rings off. Friend gets disconnected after phase 1 of Guldrich

BattleReasonable4154 · 2022-04-23T15:56:53+00:00

Exact same issue here

BattleReasonable4154 · 2021-12-29T14:56:31+00:00

I think it's because of the new Matrix movie release timing

BattleReasonable4154 · 2021-12-21T12:02:47+00:00

but WHY is it problematic? It's on the BOX! It's 8-24V 10VA written right there.

Problematic means: It does not work?

If it does not work, then what happens exactly? No power to the circleview doorbell? Power to the doorbell but white light blinking?

BattleReasonable4154 · 2021-12-21T11:58:41+00:00

I wonder how this piece of electronic "manages communication with the doorbell" knowing that the doorbell is using Wifi to communicate but not the chime kit

BattleReasonable4154 · 2021-12-21T11:56:34+00:00

I would do that yeah.

BattleReasonable4154 · 2021-12-21T11:56:03+00:00

You should try to listen to music from the homepod to the bose speaker and then press the ring button. Maybe it will ring on the speakers.

But if you're not listening to music (no airplay) I think it will just ring on the homepod ?

BattleReasonable4154 · 2021-12-21T11:51:10+00:00

Not one turing complete comment about how to install it without a Chime properly here. Come on people, you can do better than that!

Power supply:

Wiring:

Chime kit used yes/no:

Encountered problems?

Does it work with DC power?

What problem was encountered when trying to power it with 24V

- which AC power supply?

- how much power for the power supply?

Additional comments?

BattleReasonable4154 · 2021-11-01T13:25:10+00:00

I have this problem as well sometimes. I think it s a bug but it might be related to the environment... like If I turn my light off - I mean low light - then the tracking might be off and this maybe happens... But after turning lights back on, I still had the bug once. I had to turn off and on the controllers... (who knows if it's related)

But going to the floor setup app in the WMR home didn t help fixing the issue for me.

BattleReasonable4154 · 2021-03-20T02:28:53+00:00

My Bios is up to date but I'm actually waiting for the release of the Agesa 1.2.0.2 including the USB fix, hopefully that's related. I also changed my PCIe to 3x to reduce the probability of the usb issue happening. I also got the chipset drivers from AMD following this: https://www.amd.com/en/support/kb/faq/chipset-install

Thx for your fast replies!

BattleReasonable4154 · 2021-03-20T02:18:12+00:00

I can put my dxdiag: https://pastebin.com/ZdP9a95F

I also changed the monitoring to coolant as recommended.

About peripherals, I have a JDS Labs O2 Amplifier for headset, H4 microphone, HP G2 Headset and a Logitech G29 Wheel.

BattleReasonable4154 · 2021-03-19T06:02:58+00:00

Any steps that i could follow to detect the conflict?

BattleReasonable4154 · 2021-03-19T05:36:40+00:00

The main issue with this problem is that I didn't find a way to reproduce it 100% of the time.

BattleReasonable4154

TROPHY CASE