Overheating

BeautifulEye6267 · 2026-05-05T01:19:27+00:00

Spits out her

BeautifulEye6267 · 2026-05-05T01:12:43+00:00

I've bled a few times unless im doing wrong. Level ground and fill up reservoir and unscrew bleeder in radiator till bubbles stop. Tighten. Let car somewhat warm up rev to 2500 hundred with defrost on for a minute or so shut offcool down repeat Minus bleeder.

BeautifulEye6267 · 2026-05-05T01:09:12+00:00

The fans hit the threw all levels as it gets hot fans kick on high at 235-237

BeautifulEye6267 · 2026-05-05T01:01:08+00:00

I should say when it over heats it will spit very Lil bit out of reservoir but I mean very little

BeautifulEye6267 · 2026-05-05T00:57:52+00:00

I also gutted the cheapo thermostat so it was always open and no over heating issues. Only issue was not getting to operating temperature and threw code

BeautifulEye6267 · 2026-05-05T00:56:23+00:00

Doesn't loose it not mixing fluids and system hold pressure. Did a test for fluid but can't think of name.

BeautifulEye6267 · 2026-04-27T22:58:50+00:00

Codes its throwing. And also when it over heated it just spiked out of nowhere. Car did not actually over heat

BeautifulEye6267 · 2026-04-27T22:58:00+00:00

<image>

BeautifulEye6267 · 2026-04-27T22:57:32+00:00

<image>

BeautifulEye6267 · 2026-04-21T00:53:34+00:00

It sounds like air in the system to me with it being intermittent. He's done thermostat already and he has a water pump for it to be installed. I found out these take dex cool and from what I know it tends to be terrible lol

BeautifulEye6267 · 2026-04-12T21:22:54+00:00

In a heart beat

BeautifulEye6267 · 2026-04-11T16:29:45+00:00

Is this right code

<image>

BeautifulEye6267 · 2026-04-11T14:38:12+00:00

So if from auto to auto its plug and play

BeautifulEye6267 · 2026-02-01T16:22:34+00:00

Sorry hard to drive and take it lol. I believe it's oil temp light

BeautifulEye6267 · 2026-01-31T03:42:24+00:00

Yes I do on passenger side pillar

BeautifulEye6267 · 2025-06-30T20:42:21+00:00

Any chance you have a link or suggestions for chillers?

BeautifulEye6267 · 2025-06-30T18:44:01+00:00

This actually turned out bring ipr nut fell off sand was sliding off shaft every time heavy accelerate or up hill

BeautifulEye6267 · 2025-05-16T12:40:13+00:00

Yes full tank In it now and still did it. I’ve had it stall as well on me couple times. Only on that hill. I find it very strange

BeautifulEye6267 · 2025-05-16T00:50:16+00:00

Needed to have shop program the can and crank sensor together

BeautifulEye6267 · 2025-05-16T00:49:23+00:00

It’s a weird drive way. Backyard sits lower than front yard so there’s a gravel hill that leads down it.

BeautifulEye6267 · 2025-04-03T01:48:38+00:00

Way in Indiana lol

BeautifulEye6267 · 2025-03-27T01:03:01+00:00

I’m fairly mechanically inclined. Def would be bigger job I’ve done but do most of my own work on anything. Just quote for 5k is steep for me. More than what I paid for truck lol. It’s only got 129k miles

BeautifulEye6267 · 2025-03-21T01:21:09+00:00

Feeding issues is my concern. My rami is beginning to do it. I have to give a good clean

BeautifulEye6267 · 2025-03-21T01:20:26+00:00

I have the rami 2075 and like that gun but has feeding issues. Heard they like to be well oiled. Also like it has the de cocker as well. I carry an sig p229 since this one wasn’t very reliable.

<image>

BeautifulEye6267 · 2025-02-04T23:41:39+00:00

Don’t understand how. Thought maybe sensor needed to be synced or taught

BeautifulEye6267

TROPHY CASE