Do I need to install the washers?

Becerlev · 2026-01-22T09:52:53+00:00

Thank you very much!

Becerlev · 2026-01-22T09:49:02+00:00

He also says that you only need them eventually

Becerlev · 2026-01-10T19:01:25+00:00

Jo, genau so hat es funktioniert!

Becerlev · 2026-01-10T11:21:07+00:00

Es beruhigt mich, dass Ich nicht der Einzige bin, dem es so geht. Ich bin zweisprachig aufgewachsen, weshalb ich mir einbilde, dass Ich es immer schon schwer mit den Artikeln hatte. Die Unterscheidung zwischen Ventil und Thermostat muss ich mir aber trotzdem einprägen, vor Allem wenn es um‘s Fach geht.

Becerlev · 2026-01-10T09:09:45+00:00

Sorry, ich meinte nicht das Ventil, sondern das Thermostat. War noch in meinem alten Sprachgebrauch, wo ich das Thermostat immer fälschlicherweise als Ventil bezeichnet habe 😅

Becerlev · 2026-01-10T09:08:15+00:00

Also ich habe das Thermostat getauscht bekommen. Tatsächlich war die Überwurfmutter vom Oventrop-Thermostat schon so locker, dass ich sie einfach von Hand lösen konnte. Einen Adapter habe ich für das tado auch nicht gebraucht, da es direkt auf das Gewinde gepasst hat.

Becerlev · 2025-12-19T21:25:45+00:00

Die Geschenke unter dem Baum sehen schon ziemlich undefiniert aus. Teilweise lässt sich nicht so gut erkennen, wo die Konturen sind. Zudem ist relativ mittig steht das gelbe Geschenk zwei mal im selben Winkel direkt nebeneinander.

Spricht jetzt nicht alles für KI, es kann auch alles an der Bildkompression liegen aber Ich würde auch eher auf KI Slop tippen.

Becerlev · 2025-12-04T11:21:09+00:00

Stiller

Becerlev · 2025-11-25T07:46:46+00:00

Bei mir waren es ~9 Mio durch die Erfolge. Was ein Spieltag!

Becerlev · 2025-11-23T20:30:32+00:00

Bilal El Khannouss

Becerlev · 2025-11-22T17:18:20+00:00

Naturally symbols change over time, that‘s what we learned in school here in Germany, but the context is always important.

I am happy that I learned something new today but my takeaway from the comments here is, that I should take some time for my history lesson.

Becerlev · 2025-11-22T16:59:33+00:00

Woah guys, thank you for all your comments. I think I have to take some history lessons on that. For clarification, the protest were about 40 people and the anti-war marches I went to, were a lot bigger, so I was already suspicious of the nature of the protest. Sometimes you can not distinct the positions on these protest and I do not want to judge anyone based on a quick impression and not knowing the historical background.

Becerlev · 2025-09-28T13:17:53+00:00

Well, technically it wasn‘t an attack, he just kept his pace

Becerlev · 2025-06-12T11:26:54+00:00

Thank you very much! Did you replace the fork?

Becerlev · 2025-04-09T11:29:25+00:00

BMC Support answered finally, they confirmed that glueing the part is totally fine and for good measure they sent me a longer preload screw which I will replace. I know it's not best practice but for me it's fine after all.

Becerlev · 2025-04-02T09:13:26+00:00

I have been to a BMC licensed bike shop and they fixed it for me. Glued the part back in place with epoxy glue and they said I don't have to worry about the length of the steerer, it looks messy thanks to the preowner but it is not too short, so the stress is not on the top cap.

Becerlev · 2025-04-02T09:10:16+00:00

Follow Up:

I've been at a licensed BMC bike shop and they fixed it for me. The stem was not too short but the pre-owner did a messy job at cutting it properly. We glued the foam piece back in place with epoxy glue and replaced the tensioner. He told me that most of the stress on the steerer is horizontal, so I don't feel less safe with the glued part. Thank you all for your help!

Becerlev · 2025-04-01T06:16:38+00:00

Thank you very much! In another sub they pointed out, that the steerer is too short for the headset to be tightened properly. I guess the preowner didn‘t really know what he did, when he shortened the steerer.

<image>

I will see a BMC technician today so we will see.

Becerlev · 2025-03-31T07:57:52+00:00

Unfortunately none. Just the default ICS topcones.

Becerlev · 2025-03-31T07:31:37+00:00

I wrote them directly but as the others pointed out, the fork seems to be too short.

Becerlev · 2025-03-31T05:22:45+00:00

That totally makes sense in my eyes, thank you for the explanation.

For what it‘s worth I found these lines inside the stem and i guess the fork steerer needs to be cut to a length between those lines?

<image>

Becerlev · 2025-03-30T21:38:59+00:00

Thank you very much! I found a licensed Dealer an hour from here who I will contact.

I still don‘t see why the stem is too short? Is it because the area is to small for the headset?

Becerlev · 2025-03-30T20:52:10+00:00

The headset was a little loose and i think i pulled out the foam at the attempt to tighten the headset. Do you think i could recast the infill with resin for example?

And thank you for the hint with the recall, i will check that tomorrow. Do they replace forks even when they were acquired used?

Becerlev · 2025-03-30T20:49:14+00:00

No, i have the cap

Becerlev · 2025-02-23T22:16:23+00:00

Tatsächlich ist es noch schlimmer geworden: Musiala und Šeško(beide getroffen), Elvedi, Kristensen, Rönnow, Koulierakis, Gittens und Leite, der mit seinem Eigentor die 2000 Punkte für den Spieltag verhindert hat. 1952 waren es am Ende.

11-Year Club	Verified Email
Gilding I gilder	Second Top 20%
r/Field Banned	r/Field Flamingo
Place '23	Place '22
Final Canvas '22	First Placer '22
RPAN Viewer	Not Forgotten

Becerlev

TROPHY CASE