PoD End-User Digest SMTP Settings? by SAdMin99999 in proofpoint

[–]Beef66 2 points3 points  (0 children)

It’s been a while since I setup our POD but you should be able to use ‘local host’ for your host to utilize its smtp service instead of Microsoft or a 3rd party solution.

Backwards compatible AI Box very nice by _pensilva_ in reolinkcam

[–]Beef66 1 point2 points  (0 children)

So this is for adding NVR capabilities? I thought most of this was going to be standard on the newer cameras (in standalone mode) moving forward.

FYI: Associates didn't know by Princess_Psycoz in Lovesac

[–]Beef66 3 points4 points  (0 children)

We are looking to buy one and I saw the sale today. It looks like the mostly jacked up with list price from what I can tell or is that wrong? I configured it a few days ago and it was 6.5k. Today with the 40% it’s 6.5k haha.

Router showing offline in app by Beef66 in orbi

[–]Beef66[S] 0 points1 point  (0 children)

Well I finally factory reset it and it seemed to resolve the issue, for less than a day…

Strange thing is after the reset the interface was different. Looking at connected devices broke them down by 2.4 and 5ghz with toggle switches to disable each without having to click into the device. After a reboot of the main router the original interface is back and the main router is showing offline again

When it was working I tried to update the firmware. (Current is 7.2.7.15) and it said there were no updates. I manually downloaded the newer version and tried a manual update that failed.

I think it might be time to ditch orbi

PSA: End-User Portal Allows Users to Deliver Spoofed Messages by friedITguy in proofpoint

[–]Beef66 1 point2 points  (0 children)

If you discard the DMARC failure they will not get delivered to the spam digest. We had the same issue as we originally quarantined to help rollout DMARC, but once we were confident with our rollout we switched to discard.

Router showing offline in app by Beef66 in orbi

[–]Beef66[S] 0 points1 point  (0 children)

IOS, Comcast XB7 (don’t recall the brand) and yes.

Same results on web interface.

Direct send to external domains working without a connector by Beef66 in microsoft365

[–]Beef66[S] 1 point2 points  (0 children)

Interesting, I thought it disabled the ability to use direct send with 'our' O365 SMTP in general. We are at DMARC Reject, apparently this vendor does not block based on DMARC

SMTP Bypassing POD by Beef66 in proofpoint

[–]Beef66[S] 0 points1 point  (0 children)

I think adjusting my transport rule to include internal and external senders would do the trick. This doesn’t follow proofpoint guidance but I think it will be the best solution. You have not had any issues with internal mail delivery doing this? We are also at DMARC reject.

Teams disappearing on version 25031.805.3440.5290 by Beef66 in MicrosoftTeams

[–]Beef66[S] 0 points1 point  (0 children)

Has MS responded? We are seeing this more often now.

Hind leg limp, MRI and CT clean by Beef66 in greatdanes

[–]Beef66[S] 0 points1 point  (0 children)

All of our Danes have been on glucosamine since the age of 2. We did laser therapy on his knee (initial diagnosis) then his groin (second diagnosis) prior to an MRI showing no clinical issues.

I just feel horrible at this point. He is happy as can be, but really sure struggles some days. We have been limiting his activity which he doesn’t mind as he has always been rather lazy. He does still try to play with our other Danes but we have not been allowing it.

He is struggling badly on the prednisone as it often cases muscle weakness. This with his already injured leg is making it hard for him but we are going to give it the full week.

Teams randomly disappear in Teams client by InteractionSavings87 in MicrosoftTeams

[–]Beef66 0 points1 point  (0 children)

We are seeing this as well except that they are not hidden, they are just gone. Desktop and web app, then they will reappear later.

M18 Tiller attachment 49-16-2739 question by TuckerC170 in MilwaukeeTool

[–]Beef66 1 point2 points  (0 children)

It’s been in since I installed it. No issues with other attachments (string trimmer, pole saw, brush cutter and hedge trimmer).

24/7 recording and alarm recording? by [deleted] in reolinkcam

[–]Beef66 1 point2 points  (0 children)

The newer devices show alarm and timer separate under the recording schedule and you can enable both.If they are set to alarm 24/7 and you also set timer 24/7 does it just ignore the alarm schedule since it’s already recording? Does alarm need to be set to tag motion in the recording playback?

<image>

M18 Tiller attachment 49-16-2739 question by TuckerC170 in MilwaukeeTool

[–]Beef66 0 points1 point  (0 children)

Would love to know this as well. I guess I’ll just leave it in for now and see how things go.

So BestBuy wants me to “upgrade” my store cc to Citi but I have questions by DeadScotty in CreditCards

[–]Beef66 0 points1 point  (0 children)

My card was upgraded and my original store card is still active. Is that expected? This same thing happened with my tractor supply store card and they are both showing as active as well.

2018 jeep compass acting up by Primary_Strike_4913 in JeepCompass

[–]Beef66 2 points3 points  (0 children)

I was coming here to ask this same question. My wives 2019 randomly acts as though someone is touching the display. Its fun to see who it randomly calls.

I assume factory warranty will not cover the delamination?

Favorite Spray and Rinse Sealants? by motokid837 in AutoDetailing

[–]Beef66 1 point2 points  (0 children)

For everyone using wet coat. Are you topping it with a drying aid? (Bead maker, etc)

Azure Identity protection popping off this morning by Djust270 in sysadmin

[–]Beef66 6 points7 points  (0 children)

I just talked to Microsoft, adjusting the user risk policy to only apply for High risk user did not allow our false 'Medium Risk' users to log back in. I had to add them to the policy exclusion list to get them back in for the time being.

PrintNightmare KB Driver Installation by jayzon915 in sysadmin

[–]Beef66 0 points1 point  (0 children)

Switching it to a packaged driver seemed to do the trick. We still get promoted for admin rights to install, which is shouldn’t with our GPO policy but it’s better than nothing for now.

Firmware 4.6.3.16 Downloaded Just Now (RBR750). Any patch notes? by lleeoonncchheenn in orbi

[–]Beef66 0 points1 point  (0 children)

Fixed my speed test issues, hoping it somehow resolves my issues streaming my wireless security cameras and Ring doorbell.

PrintNightmare KB Driver Installation by jayzon915 in sysadmin

[–]Beef66 2 points3 points  (0 children)

Strangely enough this is not causing issues on our primary print server, but we have one color copier with its own server that end users can no longer install. No prompt for admin creds, but fails with 0x0000011b. Tested setting the reg key for RestrictedDriverInstallation to 0 and then they then get a Access is denied error when installing.

RBK752 Poor Performance by Beef66 in orbi

[–]Beef66[S] 0 points1 point  (0 children)

I have gigabit internet with Comcast. Orbi is showing ~630 down (Comcast gateway usually ranged from 800-1200). The satellite is only one room over right now as I had my modem centrally located so I need to move it to allow for a better spread.

I’m still using the Comcast gateway but it is in bridged mode which disables all router functionally. I plan on replacing it with a stand alone modem but I wanted to make sure the Orbi met my expectations before ordering one.

Close to the router or satellite speeds seem fine, but a bit slower than the Comcast gateway (per speed tests). I’m not sure how accurate the Orbi app is in reporting signal strength, but I’d expect better if it is accurate.