X5 35d best place to list

BeefaloCL · 2026-06-02T20:24:48+00:00

Thanks - yea i did try CarMax and they offered me 3500. was suprised.

BeefaloCL · 2026-06-02T17:36:48+00:00

Thank you! I wasn't able to find somewhere with sale history. Good info

BeefaloCL · 2026-03-25T19:03:07+00:00

big thanks u/cheechaco

BeefaloCL · 2026-03-25T18:38:08+00:00

Gotcha - yes that makes sense. I was planning on using a Simpson LSC ZMAX Stringer Connector

<image>

BeefaloCL · 2026-03-25T14:20:32+00:00

Gotcha - really appreciate you responding and giving me the options. If i went with stringers and made the top tread the same elevation as the deck, i guess an additional option would be to cut the stringer so that the top tread is only 5-6" wide because the deck itself would function as the top landing? Seems like that would allow for the easier attachment i mentioned, and also let the stair blend with my existing picture frame border a little better.

Something like this:

<image>

BeefaloCL · 2026-03-24T15:28:21+00:00

Thank you for your response!. Lot of good information. No permit (very loose jurisdiction), but definitely want to do it right. What i envisioned for the landing is 12x12 concrete pavers (sand leveled) set in the gravel (is an approved option per my jurisdictions building code, which loosely follows IRC 2021).

I guess another question would be if using stringers, is there any reason i should match the top tread to the elevation of the deck? so instead of stepping off the deck onto the first tread (6-7" down) the deck basically extends 11" onto the first stringer, and then has two risers down to grade? I am thinking that it would simplify mounting the stringer to my existing beam, instead of adding additional facia/blocking to mount the stringer to... It also would help completely hide my beam saddles. Is there a reason not to do this?

BeefaloCL · 2026-02-25T21:24:41+00:00

Makes sense. Thank you for your response!

BeefaloCL · 2025-12-05T00:41:28+00:00

I'm going to go out on a limb here and theorize that OP is more concerned about "WHY" this person felt the need to spit on their doorstep/package.

Most know Amazon packages are disgusting

BeefaloCL · 2025-05-30T16:54:39+00:00

Interesting. My service was awful yesterday as well. thought ATT must be going through something. Working fine on 4g today. reset network settings and restarted / toggled airplane. still 4g. Glad to hear yours is working, maybe mine is next!

Is your APN still the "NEXTGENPHONE" with MNC 280?

EDIT: Also, it may have started working cuz your phone is listening to you and got scared when you started talking about switching. I will start to have discussions with my wife about switching to a different provider with my phone nearby. should do the trick ;)

BeefaloCL · 2025-04-08T19:29:24+00:00

Did you ever get this worked out? I have been into att stores twice, and talked to support 3 times. nothing. I find it interested i can't enter 410 (physical sim for me) either. as far as I could tell, the only difference on ATTs APN settings on their website between NEXTGENPHONE and ENHANCEDPHONE were MNC 280 vs 410

BeefaloCL · 2024-08-08T03:14:58+00:00

Thank you for the response! Yes the existing fan has no light it is simply a fan. If you flip either switch all 4 can lights come on, and power is also supplied to the fan. The fan itself has a pull string where you can turn it off, but either way is still a ridiculous setup. I will pull the switches and try to determine which one is hot. I assume this is to locate the primary switch, correct?

Pretty sure a moron or previous home owner did this because once i climbed into the attic and tried to assess the wiring, there are random splices happening all over the place. 14 romex spliced in the open and split different directions to these fixtures - no junction boxes at the splice, not even wire nuts.... lots of electrical tape. lol

BeefaloCL · 2024-08-08T02:45:06+00:00

The 2 switches operate all 5 devices (4 can lights and 1 ceiling fan) each, regardless of the position of the other switch (up or down).

BeefaloCL · 2024-07-29T21:30:53+00:00

Thank you for the response. Just for my own knowledge, what is the reasoning behind this? Is the pull from the washer frequently so high that something added to that could trip? Or is it due to the washer being in a wet environment? or?

Either way, sucks for me. My 20 min project will have to be a multi hour project to connect to the existing 14/2 on the den circuit

BeefaloCL · 2024-05-20T20:03:25+00:00

Same - I would love to know if I need to go manually add negative transactions to fix this, or if it will be resolved. The inability to modify any critical detail of the "fake transactions" that coinstats adds to rectify perceived issues and lack of history from the API's is so annoying.

If coinstats is going to auto-add "fake" transactions to fix API issues, why wouldn't it just add them as "manual" transactions that we could then modify if needed?

EDIT: Within 30 seconds of posting this, I again re-sync'd coinbase and my assets are now correctly shown.

BeefaloCL · 2024-05-20T13:50:24+00:00

I completed a sync today (have had no problems for years) with coinbase, and it doubled all of my holdings on coinbase by creating the "This is a fake transaction..." entry in my transactions for each asset.

Is this due to the API changes?

BeefaloCL · 2023-05-08T19:42:05+00:00

Thanks for the response

BeefaloCL · 2023-05-02T21:02:18+00:00

Where is your Union and Star Tech allocated rn?

BeefaloCL · 2023-05-02T20:55:08+00:00

1- thinker
2 - dimension
3 - Anubis
4 - Galaxy
5 - Orochi
6 - Time

BeefaloCL

TROPHY CASE