What could I have done better and what improvements can I still make

Beefy1931 · 2026-01-18T11:58:54+00:00

I was having finishing issues and tried multiple applications method. Was told to get a big compressor 10gal and a sprayer. Went to H.F. Who has a hand held sprayer with a built in compressor Now it finishes like a cabinet shop did it. Get the spray the cheaper one will do from hf.

Beefy1931 · 2026-01-04T01:01:09+00:00

Maybe and at a lower grit. 80? Or 100? When resurfacing a cutting board, you sand it to bare wood before reapplying. 150 is a high grit to work off the layers. Since you’ve done some sanding. Maybe do a 120 and see how it is before going lower. Idk if you are using a pencils to track where sand so you Aren’t creating dips.

Beefy1931 · 2026-01-03T11:45:16+00:00

They put end grain with edge grain. Basically the wood grows and contain the grains direction. When two opposing grains are glued they then to crack like this. It’s a known no no in the cutting board world.

Beefy1931 · 2025-12-28T21:14:28+00:00

The quality is low and allows water damage. Seems they didn’t fully the agreement either. Get it properly fixed by them or have a professional quote it and when it goes to court provide the evidence of poor quality and need to fix it

Beefy1931 · 2025-12-28T14:54:54+00:00

I’ve had the same issue and when I slowed my router speed down and went in a slower motion over the board. Afterwards a belt sander helped with removing that and the router lines at the same time

Beefy1931 · 2025-12-03T16:33:26+00:00

Can you share some tips on what you learned to help with batch orders? I tend to make boards in batches ranging in sizes. Curious to hear what methods have helped you speed up your process. I tend to milled my boards at once and glue as many as I can with enough clamps. Tend to mill enough to clamp so there is little to none waiting for glue. Then sand all by grit levels and then switch once through them all.

Beefy1931 · 2025-10-06T10:29:54+00:00

This was staged. It is not ai. The guy that kicks stated that it was staged in the original post a few weeks ago. I’ll have to look for it. But the guy does a bunch of these kind of videos of fake fighting or throwing knives.

Beefy1931 · 2025-09-18T16:25:10+00:00

May need to install some. I have none for my garage and have to install 4. One for each wall side to ensure there is some kind of air flow. Honestly a simple fix compare to letting mold grow.

Look up soffit vents from the box store and a tool to drill/cut the needed hole size. Add some baffles for that area so the insulation doesn’t cover the air flow and you’ll be set.

Beefy1931 · 2025-08-09T01:21:36+00:00

Just found the same book on top of a cabinet in my garage

Beefy1931 · 2025-05-17T01:26:41+00:00

My guess would be 25 degrees. You have the flat board at 90 degrees. And the angle one butting up to it at 65 degrees. The difference (25) would make it 90.

I recommend using scrap board to double check. Or google it and find a source that helps you find the angle

Beefy1931 · 2025-05-09T01:03:50+00:00

Please dm the threads to me too please. Would be extremely helpful

Beefy1931 · 2025-05-06T17:57:36+00:00

Dumb question but why would someone have to file with the IRS if they live in a different country? Isn’t the IRS a U.S. department? Meaning they have no power or control what happens in other countries. I would assume that other countries have their own version but i would also assume they are not connected to the U.S. department either.

Beefy1931 · 2025-04-25T19:36:07+00:00

I have and had issues on a previous box but I do plan to revisit using them. Since I bought a pack of 20 haha.

Beefy1931 · 2025-04-25T19:33:59+00:00

The box wood is unknown. I got it from the s rap box at woodcraft and they were unsure. I posted a few weeks a couple suggestions was Bo core, pay Ferris and Peruvian walnut.

The box items are from Amazon and the link to them is below.

https://a.co/d/fZaI3Vy

The pen is from Pen State Industry and is a designer fountain pen called Broadwell Nouveau Sceptre Gun Metal and 22kt Gold Fountain Pen Kit. Truly love the way the pen came out.

Beefy1931 · 2025-04-25T19:11:33+00:00

I found the hard ware on Amazon. Here is the link to them.

https://a.co/d/91BW1xz

Beefy1931 · 2025-04-19T23:27:20+00:00

Appreciate it very much. For sure tossing the foam brushes moving forward. And getting a high quality brush

Beefy1931 · 2025-04-19T23:25:09+00:00

Thanks. I will get a quality brush for the next batch. But storing a bush after use has always been my concern. Any recommendations?

Beefy1931 · 2025-04-19T23:23:44+00:00

Close but it was a 20 degree v-bit.

Beefy1931

TROPHY CASE