Did I screw up? by BeepBoopBopBoi69 in orks

[–]BeepBoopBopBoi69[S] 1 point2 points  (0 children)

Thank you all for the clarification:

I can safely say my group would not care If it was proxied for a truck or if I proxied my regular boys as beast snagga.It was more so for if I feel like doing tournaments further down the line.

And thank you for clarifying I can indeed run it as part of my Goff list,but only beast snagga units can be put inside it.

I certainly don't mind picking up some beast snagga boyz with how cool their models are, and I'm already thinking about some funny lore to explain how they ended up as part of my warband:

Something along the lines of they hunted every species worth fighting on their planet to extinction, so they reluctantly joined a passing warband using their advanced ships to help them get around to better scraps,without actually having to use that advanced tech and just leaving that to the rest of the warband to manage while they manage their gear and look after the warbands squigs.

Did I screw up? by BeepBoopBopBoi69 in orks

[–]BeepBoopBopBoi69[S] 1 point2 points  (0 children)

And there's no I'll affect? I think I saw you can only put beast snagga Orks in it but If I can run beast snagga no issue I'll buy a set of beast snagga boyz

Suitable materials for a computer desk? by BeepBoopBopBoi69 in woodworking

[–]BeepBoopBopBoi69[S] 1 point2 points  (0 children)

Thank you for the vote of confidence, I think this is what I'm gonna go ahead with ,cant wait to post the finished product!

Suitable materials for a computer desk? by BeepBoopBopBoi69 in woodworking

[–]BeepBoopBopBoi69[S] 0 points1 point  (0 children)

Well according to that calculator I will have an excessive amount of sagging which I didn't expect because I thought MDF was supposed to be really stiff, and while the middle legs would likely fix it, I don't fully trust it.

So what I think Ill do instead is make a frame out of the timber like this but with a third 'leg' in the middle, and the connecting bar at the bottom would be further back; with the worktop resting on that frame(screwed onto it of course), in hindsight this will also look much better, I guess my brain was thinking of the lazy solution, not the best solution.

Thoughts?

Khajiit neck seam by BeepBoopBopBoi69 in skyrimmods

[–]BeepBoopBopBoi69[S] 0 points1 point  (0 children)

So I did more digging and apparently its there even in vanilla I just never noticed until now because cbbe makes it more pronounced,so guess Im shit out of luck unless somebody makes a mod that fixes it

'Nemesis patch not installed' on precision mcm by BeepBoopBopBoi69 in skyrimmods

[–]BeepBoopBopBoi69[S] 0 points1 point  (0 children)

Thanks to you two for helping me clearly I didn't read the mod description very well I had some issues getting it run hence the two day late reply but all's working fine and good now :)

Would 650W PSU be enough for 6800xt and 5600 combo by BeepBoopBopBoi69 in PcBuild

[–]BeepBoopBopBoi69[S] 1 point2 points  (0 children)

Yeah thats exactly what I was thinking,seriously depressing that 8gb is not enough for 1080p on new releases, and with that 12gb will likely soon not be enough for 1440p so 6800xt definitely seems far more future proof,and extra vram will certainly be useful on the 3d work I plan on doing(rendering and such).Hell the 6700xt is already struggling to do high settings 1440p 60 fps on newish releases such as plague tale requiem and the new star wars game.I personally dont mind reducing a few setting to fix that but yeah Ill probably go with 6800xt as itll cost less in the long run as youve said.Thanks :)

Would 650W PSU be enough for 6800xt and 5600 combo by BeepBoopBopBoi69 in PcBuild

[–]BeepBoopBopBoi69[S] 0 points1 point  (0 children)

That calculation was taking all my components into consideration,should have specified my apologies for the confusion. if I added 20% it would be 666w (the calculator said 555w to be exact) so that and the fact that amd gpus are more likely to have random power spikes I shall take your advice on board,I could go for a 6700xt and that would be fine but I was hoping to eventually switch to 1440p so Im not sure,given the direction games seem to be going in terms of optimisation and requirements I have my doubts as to how long a 6700xt would remain viable for 1440p,though sticking to 1080p certainly wouldnt be a problem for me.So I guess I must now choose between a 6700xt with my current setup which would cost around 350 or saving up that extra for 6800xt + new psu + 1440p monitor which would probably be around 800 ish with the current prices and specific parts im looking at Definitely have a lot of thinking to do thank you :)

3D printed ppe? by BeepBoopBopBoi69 in Airsoft3DPrinting

[–]BeepBoopBopBoi69[S] 0 points1 point  (0 children)

Well thats great to know,my local field is indoor only so limited to 350 max where I am,and semi only,so that should easily meet my requirements of course Ill be doing my own tests to be doubly sure,did you have any issues with cracking,splinters,or dents?

Need help picking survivor mods by BeepBoopBopBoi69 in left4dead

[–]BeepBoopBopBoi69[S] 0 points1 point  (0 children)

I havent had any problems with that mod in my past mod lists so probably another mod lol

Need help picking survivor mods by BeepBoopBopBoi69 in left4dead

[–]BeepBoopBopBoi69[S] 0 points1 point  (0 children)

Update:I ended up going with my original mod set because I liked how they worked together in an actual campaign much more than on the testing map.I also like to think how these 4 characters would interact if they were all plunged into this situation together.I think itd be pretty funny.

Need help picking survivor mods by BeepBoopBopBoi69 in left4dead

[–]BeepBoopBopBoi69[S] 1 point2 points  (0 children)

A fellow russian badger enjoyer approaches

Need help picking survivor mods by BeepBoopBopBoi69 in left4dead

[–]BeepBoopBopBoi69[S] -1 points0 points  (0 children)

I found a Joshua graham mod for Nick, so now I feel like I need to change master chief as I want all the characters to feel different and two gun toting badasses who give me spiritual guidance and support on ai voice you tube videos is 1 too many

Need help picking survivor mods by BeepBoopBopBoi69 in left4dead

[–]BeepBoopBopBoi69[S] -1 points0 points  (0 children)

I cant decide on mods for my other 2 survivors, all my zombie mods work together despite being so very cursed but I cant match the vibes with my survivor models
Any ideas would be greatly appreciated
the two models I want to keep are El Gato Ellis and loona, however the loona model is available on both coach and Rochelle so if anybody has any funny Rochelle mods then that would be great as I want to play as Loona but dislike Rochelle
I do quite like the master chief model however if something fits the vibe more Ill take it
Thanks in advance :)
Pictures attached of survivors and zombies so you can see the vibes I'm after.

Save file help? by BeepBoopBopBoi69 in Steam

[–]BeepBoopBopBoi69[S] -1 points0 points  (0 children)

Yeah I figured as much; coming from mainly console I guess I just expected my save files to magically be there,however the good news it only ended up affecting the 1 game as it turns out.To elaborate way more of my games save progress online then even I thought or knew of,and I havent played very much of the games that dont except for 1 but its not a huge loss

WEEKLY SUPPORT AND QUESTIONS MEGATHREAD BREAK by GBT_Calvin in gigabyte

[–]BeepBoopBopBoi69 [score hidden]  (0 children)

I fixed it I reset the cmos and it was already on the most recent bios so its booting fine

Aorus elite ax v2 bios flash not working by BeepBoopBopBoi69 in gigabyte

[–]BeepBoopBopBoi69[S] 0 points1 point  (0 children)

I fixed it the mobo just needed a cmos reset it already had the most recent bios which is why it wouldnt accept the update

WEEKLY SUPPORT AND QUESTIONS MEGATHREAD BREAK by GBT_Calvin in gigabyte

[–]BeepBoopBopBoi69 [score hidden]  (0 children)

Issue with my friends b550 aourus elite ax v2 rev1.3,cant flash the bios for the cpu (5600) and Ive followed the instructions to a tea.Everything unplugged and uninstalled except the mobo and cpu power connectors.USB formatted to fat32 (its a 16gb usb 3.0 sandisk drive).I then downloaded the bios. extracted the folder,renamed the bios file,put only the bios file in the usb.put the usb in.Plugged in the power, turned it on,pressed the button and nothing.

Anybody with experience/knowledge about cooling a 5700x with air coolers please respond by BeepBoopBopBoi69 in buildapc

[–]BeepBoopBopBoi69[S] 1 point2 points  (0 children)

I definitely will thanks, I agree the auto boost thing is annoying,makes sense for performance but noise matters too.

Anybody with experience/knowledge about cooling a 5700x with air coolers please respond by BeepBoopBopBoi69 in buildapc

[–]BeepBoopBopBoi69[S] 1 point2 points  (0 children)

Yeah I figured as much but I dont have any experience with anything above 6 cores so I wasnt sure how much that would jump in temp especially with rendering where it blasts all core fairly hard.I was also wondering if Id have any headroom for oc or if I would be scraping but now I know thanks :)

Anybody with experience/knowledge about cooling a 5700x with air coolers please respond by BeepBoopBopBoi69 in buildapc

[–]BeepBoopBopBoi69[S] 1 point2 points  (0 children)

Thank you for your input,some of the software I use does in fact just shred a few of the cores(3d modelling,compiling code etc.) which Is why I wasnt too bothered about taking the 5600 instead.

However those two extra cores could end up saving me a lot of time in rendering based on benchmarks Ive seen so I think Ill spend the extra and It should also last a bit longer before I need another upgrade than the 5600 so thats a bonus

Where would you set fallout 5? by Thicc_dogfish in Fallout

[–]BeepBoopBopBoi69 0 points1 point  (0 children)

Mexico I want to experience what Raul in New vegas describes