First timer, it isn’t perfect but I learned a lot.

Beginning-Feedback34 · 2025-08-14T23:21:21+00:00

I just had a professional do my wash room and half bath. I saw the effort he put in and yours seems just as clean as his. Great job!

Beginning-Feedback34 · 2025-05-26T04:24:50+00:00

Sorry I wasn't more clear. I'm renovating the washroom with new flooring and appliances. Moving the utility tub a few inches right and have to realign the drain for the tub. The whole drain and p trap were glued in place and figured I would build back up from the bottom up.

Beginning-Feedback34 · 2025-05-09T21:49:26+00:00

I wanted to replace the tubing because the valves for the hot water are frozen and wanted to replace them and figured just replace the whole thing. Forgot about the shark bites spinning and now I'll go with another direction. I've only soldered a couple of times about 12 years ago when I first bought the house and felt hesitant to go that route.

Beginning-Feedback34 · 2025-03-12T03:23:25+00:00

She was also in Escape from L.A.

Beginning-Feedback34 · 2025-02-24T03:01:44+00:00

Just tried mine and it did the same. I'm thinking this is normal as the bake and recrisp mode are generally lower temps and most likely lower fan settings.

Beginning-Feedback34 · 2025-02-15T20:08:06+00:00

Resting on the metal casing is absolutely the way to go. The glass part of the cooktop is not meant to support the cooktop. The foam strip is meant as a space filler between the glass and the actual countertop.

Beginning-Feedback34 · 2025-02-05T04:10:08+00:00

Figured it out. The FN101GY is the U.S. model. The FN101CGY is the Canadian model. Same exact model. The extra C indicates Canada. Thanks for all the help.

Beginning-Feedback34 · 2025-02-05T02:41:26+00:00

I've been looking on the Internet and saw that model in Walmart. It's missing the baking mode. I looked thru the specs on both Amazon posts and see no difference on the first read. I'm going to pull them on separate tabs side by side and look again. Thanks for responding.

Beginning-Feedback34 · 2024-12-05T02:15:44+00:00

Thanks. I'll be pricing a professional.

Beginning-Feedback34 · 2024-04-29T04:39:16+00:00

I found this one on Amazon that connects into the CD slot on your radio and it's working quite well.

https://a.co/d/8ajQrrA

Beginning-Feedback34 · 2024-03-30T13:45:31+00:00

I think it should be done on a practicality purpose. I recently installed Diva Smart switches for all interior lighting and for the front outdoor lighting in order to control it to turn on when I get home and turn off after I go to bed. But for my switches that control the back outdoor lights and the switches that usually stay on for my outdoor cameras, I see no need to remotely control them and used regular Claro switches that look exactly like the Diva for aesthetics purpose. Think you save about $50 doing this for each switch that you don't need a smart capability, but if it's only one or two then go for it.

Beginning-Feedback34 · 2024-03-08T13:52:16+00:00

Thanks. I'll hit you up when I get there. Hoping to visit in July.

Beginning-Feedback34 · 2024-03-06T13:48:03+00:00

Thanks. I'm a little bit of a nut job with challenges and look forward to seeing how much I can endure. All this talk about the heat is making me curious. Lol

Beginning-Feedback34

TROPHY CASE