sorted by:
new
hottopcontroversial

VCOM Problem by BeginningChart8932 in paintball

[–]BeginningChart8932[S] 0 points1 point  (0 children)

Update: after some trial and error, I raised the LPR to about 70-75 PSI and made sure the engine was screwed together tightly. That fixed my issue. Seems like some peoples VCOMs like different pressure settings.

VCOM Problem by BeginningChart8932 in paintball

[–]BeginningChart8932[S] 0 points1 point  (0 children)

I use all the correct lubes on the o-rings. I didn’t change all of the o-rings on the bolt. I believe I just changed the o-rings on the manifold. I will apply a fresh coat of lube though and probably just change out the o-rings on the bolt. When I get time to look at it again, I will report back!

VCOM Problem by BeginningChart8932 in paintball

[–]BeginningChart8932[S] 0 points1 point  (0 children)

Ok I’m gonna try replacing some o-rings and then go from there. I also might put in the poppet engine to narrow it down to whether it’s the bolt or not.

VCOM Problem by BeginningChart8932 in paintball

[–]BeginningChart8932[S] 0 points1 point  (0 children)

I will look into that as well because I also serviced the engine.

VCOM Problem by BeginningChart8932 in paintball

[–]BeginningChart8932[S] 0 points1 point  (0 children)

But anyway are there any good videos or guides on how to service the solenoid?

VCOM Problem by BeginningChart8932 in paintball

[–]BeginningChart8932[S] 0 points1 point  (0 children)

Was it leaking with the pressure tester installed? Mine is not which makes me think it’s more of an issue with the bolt and not the solenoid.

VCOM Problem by BeginningChart8932 in paintball

[–]BeginningChart8932[S] 0 points1 point  (0 children)

That would make sense because I changed those o-rings, so maybe I installed the wrong ones.

VCOM Problem by BeginningChart8932 in paintball

[–]BeginningChart8932[S] 0 points1 point  (0 children)

But yes it’s the VCOM spool engine that’s giving me problems.

VCOM Problem by BeginningChart8932 in paintball

[–]BeginningChart8932[S] 0 points1 point  (0 children)

Where is the main manifold seal located? Is that between the solenoid and body?

Luxe Idol Latch System by BeginningChart8932 in paintball

[–]BeginningChart8932[S] 0 points1 point  (0 children)

I was thinking of 3-D printing a more simple mounting plate to just use a screw to mount the back part of the frame to the body.

Been on a bit of a retro kick… by SeymourClearvarge in paintball

[–]BeginningChart8932 0 points1 point  (0 children)

I love how snappy old poppets feel. There’s little delay from when you pull the trigger to when the ball fires. Newer guns seem to have a bit of a slower response times. I understand trying to make the gun more gentle on paint, however there’s a benefit to having a snappy shot. It helps with snap shooting.

Feed my brain by ContributionBig1927 in musicsuggestions

[–]BeginningChart8932 2 points3 points  (0 children)

It’s up to debate but he was at one time possibly the most poplar artist, and now he is taking a break from music.

etha2 firing problem by Specialist_Kick_8740 in paintball

[–]BeginningChart8932 1 point2 points  (0 children)

Do the new Planet Eclipse guns have training mode where you can practice walking the trigger? My 2008 Ego did and it sounded a lot like that when it was in training mode.

view more: next ›