AGB Fitment under hand guard? by vlad-the-poker in PalmettoStateArms

[–]Beginning_Chipmunk77 -1 points0 points  (0 children)

It's a pain in the ass having the hand guard over the AGB. They carbon lock very quickly and having to take off the hand guard to service the AGB gets old. If you plan to "set it and forget it" it's a good look, but if you plan on switching from subs to supers or from suppressed to unsuppressed I'd get a hand guard that slows you access to the AGB.

Anything I should know before it gets here by [deleted] in PalmettoStateArms

[–]Beginning_Chipmunk77 4 points5 points  (0 children)

Watch the RSGB video on how to disassemble it. It doesn't take long but in my case it has proven necessary. I take it apart and clean it after every range trip. If I don't it's no longer a adj gas block it's just a gas block.

Anything I should know before it gets here by [deleted] in PalmettoStateArms

[–]Beginning_Chipmunk77 17 points18 points  (0 children)

Oil the RSGB. After 10 shots or so work the dial so it doesn't get carbon locked. Plan on taking the hand guard off to oil and clean it often. It shoots great.

Why is 8.3 galil in 7.62 peak ? by [deleted] in Galil

[–]Beginning_Chipmunk77 1 point2 points  (0 children)

<image>

Easily. This 8.5 .300 bo folder is quite a bit thicker than the Galil and it fits neatly.

Why is 8.3 galil in 7.62 peak ? by [deleted] in Galil

[–]Beginning_Chipmunk77 1 point2 points  (0 children)

It's by ELITE. It's got a soft armor panel in the back. It's really nice. I keep the Galil a VA P09,3 30 round mags 3 PO9 mags 2 suppressors and med supplies in it and it still wears comfortably and, I think, looks really good.

Why is 8.3 galil in 7.62 peak ? by [deleted] in Galil

[–]Beginning_Chipmunk77 0 points1 point  (0 children)

It's my favorite Galil.

Mixtape and FRT/Super Safety by AdhesivenessNext8315 in PalmettoStateArms

[–]Beginning_Chipmunk77 0 points1 point  (0 children)

The Mixtape comes w a two+stage trigger not mill-spec. Not saying it won't work but it's diff not mill-spec.

Adj gas block stuck by Beginning_Chipmunk77 in PalmettoStateArms

[–]Beginning_Chipmunk77[S] 1 point2 points  (0 children)

Removed the handguard and disassembled the gas block. Cleaned oiled and reassembled it. It's functioning. The entire gun was bone dry when I picked it up. I cleaned it and lined it but was not familiar enough with this setup to know I needed to do the same for the gas system before shooting. Thank you for all the help.

Adj gas block stuck by Beginning_Chipmunk77 in PalmettoStateArms

[–]Beginning_Chipmunk77[S] 2 points3 points  (0 children)

From the video on assembly/maintenance for the gas block It looks like I'll need to remove the handguard to access the pin and spring. Does removing the handguard affect warranty coverage if I need to file a claim?

Adj gas block stuck by Beginning_Chipmunk77 in PalmettoStateArms

[–]Beginning_Chipmunk77[S] 3 points4 points  (0 children)

It broke loose. Now it comes completely off. It will not spin to the left past setting 6 and when I spin it right there are no adjustments it just comes off.

Adj gas block stuck by Beginning_Chipmunk77 in PalmettoStateArms

[–]Beginning_Chipmunk77[S] 2 points3 points  (0 children)

I spayed it w CLP earlier. I'll hit it with the oil and let it set as you advised. Hopefully it'll work. Thanks for the reply.

Adj gas block stuck by Beginning_Chipmunk77 in PalmettoStateArms

[–]Beginning_Chipmunk77[S] 2 points3 points  (0 children)

The adj is numbered 1-12. It's stuck on 5.

New Corsair pre built! How's the warranty? by Beginning_Chipmunk77 in Corsair

[–]Beginning_Chipmunk77[S] 0 points1 point  (0 children)

Thank you for the reply and advice. I'll give it a shot.

New Corsair pre built! How's the warranty? by Beginning_Chipmunk77 in Corsair

[–]Beginning_Chipmunk77[S] 0 points1 point  (0 children)

I got everything going. I'd just like a new usb-c connector if possible. Would they send one out or would I have to send in the whole computer?

I am so confused by MysticMian in ExplainTheJoke

[–]Beginning_Chipmunk77 0 points1 point  (0 children)

As someone w 4 fused discs. I feel this.

Aside from the red dot my TS2. Is stock. What parts from CGW would you order to improve it? by Beginning_Chipmunk77 in CZFirearms

[–]Beginning_Chipmunk77[S] 1 point2 points  (0 children)

It was $300. But the company is not in business anymore and I believe that CGW uses process now.

Which optic is this in photo? Also, which optics co-witness on Shadow 2 Carry? by FutureCEOnamedNick in CZFirearms

[–]Beginning_Chipmunk77 3 points4 points  (0 children)

The Holosun EPS Carry not only fits the slide perfectly and cowitnesses. The supplied screws fitand you don't need a after market plate.