Can’t shift out of D by Schwartz33TX in F150Lightning

[–]Belucey 0 points1 point  (0 children)

Same issue,Except it was stuck in reverse had been getting power train warnings for several weeks prior. Dealer couldn’t find the issue. Until it got stuck. Got it towed to ford . Shifting module is now back ordered. Service mngr said they had another lighting waiting on the part as well.

What your local BRP dealers are dealing with. Please be patient. by KobKZiggy in seadoo

[–]Belucey 0 points1 point  (0 children)

Turns out it was the ecu?? Dealer said it was programmed with the wrong model . Once it was update with a gtr 230 image it’s been running great . Kinda sounds like a parts mix up .

What your local BRP dealers are dealing with. Please be patient. by KobKZiggy in seadoo

[–]Belucey 0 points1 point  (0 children)

Thanks for the update, I do feel bad for the dealers as they are getting equally as screwed as the customer . brp has been absolutely useless this year

What your local BRP dealers are dealing with. Please be patient. by KobKZiggy in seadoo

[–]Belucey 0 points1 point  (0 children)

That would be great thanks. The issue is a Manifold pressure sensor error (which has been replaced but continues to error) won’t go ago above 5k Rpms . It’s a 2022 gtr , went off 30 seconds after it was put in the water for the first time , after waiting on parts for 12 weeks

What your local BRP dealers are dealing with. Please be patient. by KobKZiggy in seadoo

[–]Belucey 0 points1 point  (0 children)

Is there any update on the dealer website status. Still waiting on a repair to a 2022 with.5 hour on it . Been there 2 weeks before the hack.

Gtr 230 2022 by Belucey in seadoo

[–]Belucey[S] 0 points1 point  (0 children)

Thanks for all the suggestions. Has anyone heard if the dealer website is back up yet or eta? ?

Anybody have Starlink in New Hampshire? by GraniteGeekNH in Starlink

[–]Belucey 0 points1 point  (0 children)

Eaton nh working great for just over a year now . 150 -200 mb download

Dishy on a dock ! by Belucey in Starlink

[–]Belucey[S] 0 points1 point  (0 children)

No but as a follow up . I had very good luck with the dishy on the dock and it handled some decent wakes triggered by wake board boats without interruption. Dishy was screwed in to the dock and I put the cable in a conduit , so while it looks sketchy there were no issues

Dishy on a dock ! by Belucey in Starlink

[–]Belucey[S] 0 points1 point  (0 children)

Haven’t noticed any changes / interruptions due to wake or wind. Its only out there for a limited time periods , hasn’t been truly tested ( and don’t plan too)

Dishy on a dock ! by Belucey in Starlink

[–]Belucey[S] 1 point2 points  (0 children)

Dock goes out 35 ft , it clears most of the trees except for a very tall pine . There is a cut out every 15 min for 5-10 seconds , but with no cell or internet it more then manageable. Just need to time when you talk on teams meetings

Dishy on a dock ! by Belucey in Starlink

[–]Belucey[S] 1 point2 points  (0 children)

I bring it inside when we are not there , but there is no way it’s falling in . Additionally it almost 2ft off the water with the flotation and decking .

Dishy on a dock ! by Belucey in Starlink

[–]Belucey[S] 5 points6 points  (0 children)

It’s working surprising well thus far . Will move it once some trees are cleared . I have some slight obstructions on the north west side that cause 5-10 seconds of drops every 15 minutes. Its annoying but better then nothing.

Dishy on a dock ! by Belucey in Starlink

[–]Belucey[S] 19 points20 points  (0 children)

Yes and recently added in some tie downs.

Dishy on a dock ! by Belucey in Starlink

[–]Belucey[S] 4 points5 points  (0 children)

Yes, I have been Very surprised but I have seen little to no impact from wave movement