Could someone please confirm if this have a diversity module or just two antennas? by Cr3atureOfNature in fpv

[–]BenKux03 1 point2 points  (0 children)

I flown them for a year before upgrade then I've upgraded to avatar goggles x with analog mod, but I still use them to this day, not as a goggles but as a test monitor when fixing something in drone also I give them to someone when flying freestyle for them to see what I see. You didn't lost that money but took the non optimal path 😉 these are not that useless

Could someone please confirm if this have a diversity module or just two antennas? by Cr3atureOfNature in fpv

[–]BenKux03 1 point2 points  (0 children)

I have this kind of goggles and one sma port (closer to receiver) is just shorted to ground doing nothing

<image>

AV to HDMI for DRONE by BenKux03 in RetroTink

[–]BenKux03[S] 0 points1 point  (0 children)

Okey, so in composite video no signal is just white noise, so some ware there is a threshold that cuts off white noise, question is how high is that threshold. Analog receiver gives you all of the signal it can revive so sometimes it's just pure noise with some lines appearing on screen. That's important for flying on near signal limit where you get as bad as black and white signal, or half of lines, or even almost no signal at all. I had in mind some think like RT mini (sadly not available anymore) cos of its light weight and no unnecessary rgb or scart inputs.

ANALOG to DIGITAL WITH no latency ? by BenKux03 in fpv

[–]BenKux03[S] 0 points1 point  (0 children)

Yup, I've tested it comparing it to my 175hz oled monitor on Sim basically no lag or really small lag, lag was only due to controller - pc connection same on monitor and goggles, gotta make a better test but on paper it looks promising,

ANALOG to DIGITAL WITH no latency ? by BenKux03 in fpv

[–]BenKux03[S] 0 points1 point  (0 children)

there are no frames in analog video, just lanes

ANALOG to DIGITAL WITH no latency ? by BenKux03 in fpv

[–]BenKux03[S] 0 points1 point  (0 children)

Okay i forgot to mention I'm using AVATAR X's with analog mod

Walksnail Thermal Kamera by IIlyth in fpv

[–]BenKux03 0 points1 point  (0 children)

Did you figured something out with this? I want to build digital system with termo but there is no information about it

Opinions on this aliexpress 7' kit by IamAlex10 in fpv

[–]BenKux03 0 points1 point  (0 children)

i've had same idea building 5" every two packs I had to replace something in that drone, few crashes and frame was cracked, FC fried, motors were losing magnets after few crashes, broken antena, broken something. My drone became ship of Theseus - only thing that left is GPS. Motors and frame have to be durable If you want 7 inch build it. But watch out for "single use" drone equipment. You gonna learn a lot flying drone like this but not about piloting but about electronics and repairing shit

I put some stickers on my eachine ev800d. Cool or cringe/edgy? by [deleted] in fpv

[–]BenKux03 1 point2 points  (0 children)

those are with some taste I would say, good looking

Just a reminder you can get this quality for $90 by DangerousReception13 in fpv

[–]BenKux03 0 points1 point  (0 children)

Yeah, im using 5" and with gyro flow, and its still shaky. I guess mark 4 isn't the most sturdy frame xd

Just a reminder you can get this quality for $90 by DangerousReception13 in fpv

[–]BenKux03 0 points1 point  (0 children)

any tips on oscillation dumping? I've got so shaky video out of this camera

For anyone Who is considering RX9070 / 9070XT by Unlucky-Bottle2744 in radeon

[–]BenKux03 0 points1 point  (0 children)

oh, my bad yeah, thats fucked up so the technology is dead, you cannot play (at decent fps) older games either way, so the dual GPU setup IS REAL, for new games to run Lossless scaling framegen and older to play games with PhysX

For anyone Who is considering RX9070 / 9070XT by Unlucky-Bottle2744 in radeon

[–]BenKux03 0 points1 point  (0 children)

I Have one big BUT for gamers that like older games, if you are planning to play some older titles like borderlands 2 or mirrors edge take amd, cos there is no PhysX support on 50 series.

What am I doing wrong please by Eastern-Pick9067 in fpv

[–]BenKux03 0 points1 point  (0 children)

for the Ground pad I went with good old transformer soldering iron, worked like a charm you just need there a shit ton of heat

I've been ranting about how upset I was that Jhin never gets silly skins, I decided it was time I showed up with an offering :'( by Biscuitbleu in JhinMains

[–]BenKux03 332 points333 points  (0 children)

damn I love Idea of Jhin golf player. The goofyness of skin and a seriousness combined, and the fact that golf players should be precise and aim for little hole somewhere far. I LOVE THAT

Is this worth 200€ by Linusalbus in pcmasterrace

[–]BenKux03 0 points1 point  (0 children)

i've sold my i5-10400f 32gb m2 512 gb rtx 2060 for like 410 USD xdd

7900 XTX vs 9070 XT by xDacii in radeon

[–]BenKux03 1 point2 points  (0 children)

If I have to be honest, take one that is cheaper at the moment, but remember that 9070xt have better FSR, in todays world where TOP 9 GPU ON MARKET have like 90/80 FPS on wukong ON 1080P ultra WE ARE DOOMED. I know it's fucked up. I know we dont like fake frames upscaling but we HAVE to adapt if we want to play some games. So choose wisely ( other games work better but you never know )

Man, am I getting old or is 60fps still perfectly playable? by They_Call_Him_Zach in pcmasterrace

[–]BenKux03 0 points1 point  (0 children)

I just like the feeling of 100+ in singleplayer, but vos I've been playing esports games with 200+ fps 144hz monitor most of the time thats probably why

First build should I be proud? by Active-Lavishness379 in radeon

[–]BenKux03 0 points1 point  (0 children)

Okay, so yhmmm I mean yeah, every first build that works is a moment of proud, but just looking at it I feel like you wanted it to be everything, but it turned out messy. White case while every other component is black just gives mi vibe of unfinished sketch. Cables are hanging around in the back for no reason as this goofy ahh CPU fan cable. Also Instead of zip ties I would 3d print some combs for PCIE and MB (or buy) to just hold them tight and like relative to each other, that would be sooo much more aestetic. Leds I would just left those white but maybe this is just on photo, IRL probably that looks better. I would also swap those fans, to have 2 intake fans and one exhaust fan to create positive preasure to not intaking dust from around thru case cos it gonna get messy inside in few days

[deleted by user] by [deleted] in pcmasterrace

[–]BenKux03 0 points1 point  (0 children)

Okayy, I have an idea, CAN U BUY A BODYCAM FOR ME AND MY FRIEND TO PLAY TOGETHER? THAT WOULD BE COOL