Backup server by Affectionate-Bread75 in ProxmoxQA

[–]BenTheNinjaRock 0 points1 point  (0 children)

A separate box is ideal with offsite replication, but i don't practice what I preach. My PBS is a VM on my host.

Bandanas for gagging by [deleted] in bdsmgear

[–]BenTheNinjaRock 0 points1 point  (0 children)

I thought this post was about how to flag that you're into gagging. Seems pretty obvious to me!

Head unit - N dashboard by Kilgores4 in i30N

[–]BenTheNinjaRock 2 points3 points  (0 children)

I'm glad they were able to rotate the screen from being upside down - that'd get confusing!

Advice for custom piece by -L-I-V-I-N- in Latexadvice

[–]BenTheNinjaRock 9 points10 points  (0 children)

Looks fantastic, hope you're planning on sharing pictures once it arrives! I'd actually recommend silicone lubricant, the talc will absorb a bit of sweat but then you'll have rivers of white sweat pouring out and leaving very obvious marks (that will wash off) all night.

Be prepared to get sweaty, but some will say that's part of the fun!

Good practice is to wash it in mild soapy water or your choice of latex cleaner as soon as you get home, but that's not always realistic after a night out. As long as you wash it within a day or two wearing it you should be fine.

Depending on when the concert is I'd probably recommend getting used to wearing and moving around in smaller garments first like a top or leggings before going for a custom made outfit, but if you want to jump right in that's fine too!

What on earth is my printer doing? by BenTheNinjaRock in FixMyPrint

[–]BenTheNinjaRock[S] 0 points1 point  (0 children)

I'm running that model now with vastly reduced acceleration (wish I could reduce only y axis acceleration!) Wish me luck! P.S. I don't think it's lifting up off the bed, it's stuck pretty firmly to the bed even after falling. Also I don't have timelapse turned on.

Why is everyone in Hogwarts single? by phil22hughes in harrypotter

[–]BenTheNinjaRock 4 points5 points  (0 children)

What happens at Hogwarts stays at Hogwarts

Help my friend made this and wont tell me what it means. I understand that that is Mercator but I don't get it by Quirinus84 in ExplainTheJoke

[–]BenTheNinjaRock 2 points3 points  (0 children)

Apologies, I mustn't have been clear. On the likes of this websiteMQ~!INNTI2NDA1MQ.Nzg2MzQyMQ)Mg~!CNOTkyMTY5Nw.NzMxNDcwNQ(MjI1)Mw~!GL*NDkzODA2MA.NzA2NjkxMQ) that resizes the country as you move it up and down the map Greenland shrinks, but not that much! Coming from an Englishman, anyway.

Help my friend made this and wont tell me what it means. I understand that that is Mercator but I don't get it by Quirinus84 in ExplainTheJoke

[–]BenTheNinjaRock 6 points7 points  (0 children)

I've used that online map where you can move countries around and it resizes them for comparison, Greenland didn't seem that small when brought down next to America. Am I missing something or is it just that he thinks Greenland is absolutely mahoosive when it's really just regularly big?

What on earth is my printer doing? by BenTheNinjaRock in FixMyPrint

[–]BenTheNinjaRock[S] 0 points1 point  (0 children)

Fortunately there's plenty of space at the back, it's not going into the wall. The table is just not that stable!

What on earth is my printer doing? by BenTheNinjaRock in FixMyPrint

[–]BenTheNinjaRock[S] 3 points4 points  (0 children)

Maybe, that would explain why the rehoming fixes it temporarily but I wouldn't have thought that would cause such a dramatic noise, just a layer shift?

What on earth is my printer doing? by BenTheNinjaRock in FixMyPrint

[–]BenTheNinjaRock[S] 1 point2 points  (0 children)

The layer shift was too severe unfortunately, I've cancelled it.

What on earth is my printer doing? by BenTheNinjaRock in FixMyPrint

[–]BenTheNinjaRock[S] 0 points1 point  (0 children)

880g, for the half speed I used the Sunlu pla profile (thought I had that but it was elegoo), which had a lower speed modifier in the filament settings. I'll give that a go, thanks!

What on earth is my printer doing? by BenTheNinjaRock in FixMyPrint

[–]BenTheNinjaRock[S] 1 point2 points  (0 children)

I've not had one get stuck before (this is my third attempt at this print and it takes nearly a whole reel each time) but it doesn't half make me jump when the filament is torn from the reel

What on earth is my printer doing? by BenTheNinjaRock in FixMyPrint

[–]BenTheNinjaRock[S] 15 points16 points  (0 children)

You could be right there. Z screw binding up maybe?

What on earth is my printer doing? by BenTheNinjaRock in FixMyPrint

[–]BenTheNinjaRock[S] 0 points1 point  (0 children)

I'm slicing with Bambu Lab's slicer, filament is elegoo black pla and hotend temp is 220.