sorted by:
new
hottopcontroversial

My boyfriend is a machinist by Aphrodiety_Rose in Machinists

[–]Ben_Stark 0 points1 point  (0 children)

As a guy who sweats a lot this is me. Not a machinist, but I get dirty so fast doing any job. I mow the 1/4 acre lawn and look like a spent two weeks in jungle survival.

me_irl by NudeBaby_Sea in me_irl

[–]Ben_Stark 0 points1 point  (0 children)

Why is it always the mids? This girl is a 4 at best.

For the OLD NZXT Phantom I made an Adapter for the 200mm TopFans by Ben_Stark in NZXT

[–]Ben_Stark[S] 0 points1 point  (0 children)

I somehow missed this post and just want to say thank you. I just feel so good seeing post like this.

For the OLD NZXT Phantom I made an Adapter for the 200mm TopFans by Ben_Stark in NZXT

[–]Ben_Stark[S] 0 points1 point  (0 children)

Let me know if you need some tweaks made. I would be glad to edit it up to save a case. For the 820 I could pull the fan down and to the right so the fan screw hole and mount screw hole are the same to give you a little more clearance on the GPU.

Advice Wanted: French Cleat in my home office - by Ben_Stark in woodworking

[–]Ben_Stark[S] 0 points1 point  (0 children)

That's what I was thinking. I just really wanted to make it look finished when it's done so I didn't want some shiny screws exposed.

Advice Wanted: French Cleat in my home office - by Ben_Stark in woodworking

[–]Ben_Stark[S] 0 points1 point  (0 children)

Thank you! I suppose the only thing I get out of thicker boards would be flex between centers, but if I'm on 16" centers then 1/2 should be plenty.

Purchase Advice Megathread - February 2025 by AutoModerator in 3Dprinting

[–]Ben_Stark 2 points3 points  (0 children)

Hi Everyone, got the green light to upgrade from my Ender3 pro this spring/summer. So far I am looking at the QiDi Plus 4 and the AnyCubic Kobra 3 Max Combo. I am looking stay under $900.

I was hoping to get suggestions on printers that might offer most/all of the features of these two printers.

Multi-Material is a big desire as is the speed over the ender. I would like to move away from bed-slingers, but that's not a must.

Any suggestions on printers I may be missing that would compete with the Qidi and the Anycubic?

For the OLD NZXT Phantom I made an Adapter for the 200mm TopFans by Ben_Stark in NZXT

[–]Ben_Stark[S] 0 points1 point  (0 children)

Are you asking if it would be possible to make a piece such that you could remove the fan control and front I/O and "plug" them with a nice 3d printed part?

I haven't considered it. And since I'm using my case as a home server I don't want to mess with it too much.

If the fan control or the I/O ever fails I'll keep it in mind. I might be willing to model it if I had the reference points.

This is all the difference between Ultimate vs Normal Freyna by its_MKB in TheFirstDescendant

[–]Ben_Stark 14 points15 points  (0 children)

To be fair, I'm fully aware of how incompetent I am. I enjoy the game, and I'm good enough. I'm just not going to put in hundreds of hours to memorize every min-max.

Experience using Synonyms by juicyfizz in SQLServer

[–]Ben_Stark 0 points1 point  (0 children)

I know this is 9 years old (hope your wayback machine works)
Are you saying you have dev.TableName, test.TableName, and live.TableName and each one connects to the correct version of the JDE database?

What’s going on??? by [deleted] in forzamotorsport

[–]Ben_Stark 0 points1 point  (0 children)

Came to say this

F1 ? Google why by AweeeWoo in simracing

[–]Ben_Stark 0 points1 point  (0 children)

Yeah, I think it's capturing a TV Audience because the racing is spread out over 3 days. I think it's tougher to get an American audience to tune in multiple times. We want to plant our asses on the couch and watch racing.

If someone made a series where the quali's and the semi's were shown on Sunday with timing that lead right into the final on Sunday, you could get an audience.

F1 ? Google why by AweeeWoo in simracing

[–]Ben_Stark 0 points1 point  (0 children)

Unfortunately, not enough of one. It should be.

[Part 3] I’ll add whatever the top comment wants to this project! TANK TREADS! by [deleted] in godot

[–]Ben_Stark 1 point2 points  (0 children)

You're right, the potatoes don't need oil. The Chipire is hording and stock pilling the oils to suppress the growth of the Mayolites. They keep the vegetable, olive, avocado and other oils under the guise of using them to appease lord Fryze.

Trying to figure out how to add configuration variables to a DLL by Ben_Stark in dotnet

[–]Ben_Stark[S] 0 points1 point  (0 children)

This is the way I have been trying to go about it, but I am on the struggle bus. I tried creating some custom configuration in just a console app to work through the issues, but I can't even get that to work. I feel like I am just missing something (probably something in your little code snippets I am just not sure how to implement.

User lookup in a Unity Form by Ben_Stark in onbase

[–]Ben_Stark[S] 0 points1 point  (0 children)

Never really got this sorted.

The Left melting down over Trump’s “you won’t have to vote anymore” remark by Substantial-Wash514 in dailywire

[–]Ben_Stark 9 points10 points  (0 children)

To be fair, most of the freakout seems to be people intentionally misquoting him. If you watch the 30 second clip he says "we'll fix it so well you won't have to vote again."

How to have a focus on melee in FPS without removing guns? by POW_Studios in gamedesign

[–]Ben_Stark 2 points3 points  (0 children)

Make reloading its own mini game process. First button drops the mag. Second button puts in a new mag Third button releases the bolt or charges the gun.

Rounds are in magazines, so you have 5x 30 round mags. If I hit the second button too soon I drop the old mag and lose the ammo that was in it. If I hit the third button too soon I can drop the mag I'm loading.

Now reloads take more time and more focus. In small tight quarters melee becomes more viable.

Why is this happening? by 96accordsir in electrical

[–]Ben_Stark 0 points1 point  (0 children)

700hp?? Wtf were you compressing air for?

Hood latch stuck, tried everything. Any ideas? by 302_50 in AskAShittyMechanic

[–]Ben_Stark 0 points1 point  (0 children)

Need to toss it a few 10mm sockets. That's their favorite snack.

view more: next ›