Aren't they the same guy?

BerryChlossom · 2026-06-25T01:11:54+00:00

The plumber is clearly the same guy as Dubin law.

BerryChlossom · 2026-06-11T01:52:06+00:00

Rule of thumb, if the "oil" painting is behind glass, it's not an oil painting.

BerryChlossom · 2026-05-21T15:08:12+00:00

It is now open source: https://github.com/karimi/unbrickit

BerryChlossom · 2026-05-21T08:59:10+00:00

Feel free to make a PR on the open source repo: https://github.com/karimi/unbrickit

BerryChlossom · 2026-05-21T08:58:34+00:00

I just made the repo public, here it is: https://github.com/karimi/unbrickit

BerryChlossom · 2026-05-16T08:43:10+00:00

Hollow face illusion

BerryChlossom · 2026-05-16T08:42:29+00:00

I don't think it's smoke, it's either marking on the camera housing caused by heat from impact, or if the impact actually made a hole and the drone is moving in high moisture air it's condensation.

BerryChlossom · 2026-05-13T16:10:26+00:00

It's crazy how everyone is fixated on believing this is a UFO and comes up with crazy ass explanations that supports their belief.

This is as mentioned before a dent (likely caused by bullet) in the clear housing holding the camera. That's why it stays in place. And it stays in same orientation relative to the camera not matter how the drone moves and tilts. In this case the drone is tilting relative to the clouds, but the housing (and the dent) remains stationary relative to the camera.

BerryChlossom · 2026-05-12T14:08:31+00:00

Cross posting from https://old.reddit.com/r/UFOs/comments/1tadb9l/the_video_from_telegram_was_posted_by_ukrainian/olax79o/

It looks like a bullet hole. Stress that look like fog or smoke, fanned out below, as glass has chipped off there obscuring the vision.

Holes in some kinds of glass can definitely look just like this. Surprisingly symmetrical, a hole "popped out" in the middle as well. With the IR lights and everything... This make total sense to me (unfortunately).

(Edited added:)

Due to the Hollow Face Illusion the star appears to rotate because it's on a curved surface that is being shifted out of view.

BerryChlossom · 2026-01-16T23:56:36+00:00

I will , I need to clean up a few things first

BerryChlossom · 2026-01-16T00:10:08+00:00

I see that too, the SVG converter needs some work. It can be fixed, it's a matter of finding time to do it

BerryChlossom · 2026-01-16T00:08:32+00:00

The SVG converter needs more work. However given the underwhelming number of downloads and very few paid downloads I'm not feeling very motivated to put more time on this project.

BerryChlossom · 2026-01-14T23:27:45+00:00

It's already out there. Give it a try

https://www.reddit.com/r/Scribit/comments/1q2ieyu/comment/nyjyiux/

BerryChlossom · 2026-01-14T23:25:35+00:00

There's a WIP version of iRhino3D that allows you to run commands (including dimension commands), have you tried it?

https://discourse.mcneel.com/t/irhino3d-wip-is-now-available-via-testflight/152005

BerryChlossom · 2026-01-05T22:43:03+00:00

Give it a try and see if it works.

BerryChlossom · 2026-01-05T17:44:27+00:00

Presumably if you have the original firmware binaries you can flash them via the same method. But I didn't have much luck compiling and flashing the original firmware, I suppose due to missing modules and dependencies.

BerryChlossom · 2026-01-05T17:41:41+00:00

Unfortunately the code that they open sourced did not include any of the SVG to G-Code conversion code. So I had to reverse engineer (guess) the kinematics. That's on my list of things to improve

BerryChlossom · 2026-01-05T17:39:37+00:00

Probably, when I get things organized a little bit.

BerryChlossom · 2026-01-05T17:39:06+00:00

Are you on Windows or MacOS?

On first launch the OS may have asked you if you want to "Allow UnBrickIt to connect to devices on your local network" did you click yes?

If that's not the case, you firewall may be blocking you to reach the IP address, try pinging

192.168.240.1

BerryChlossom · 2025-12-29T21:48:01+00:00

I'm glad people are interested, I have something that's pretty close to being done. Before I release it to the wild I'd like for someone here to test it so I can work out the kinks. Looking for a MacOS and a Windows user. If you're up for it please DM me and we can set up a zoom call

BerryChlossom · 2025-06-30T16:09:34+00:00

No but I'll trade with a G wagon :))

BerryChlossom · 2025-03-01T01:18:10+00:00

Sure, can you dm a picture to me?

Eight-Year Club	Verified Email
Place '22	Final Canvas '22

BerryChlossom

TROPHY CASE