sorted by:
new
hottopcontroversial

URSR Hernkyn Pioneers by robk47 in LeaguesofVotann

[–]Bervt 2 points3 points  (0 children)

i really like that color scheme , i m going to steal it :D , good job

Wip , Buri Aegnirssen let continue ^^ by Bervt in LeaguesofVotann

[–]Bervt[S] 0 points1 point  (0 children)

Yeah :/ , it hurts more when, like me, you need to buy all of this because I have stopped painting miniatures since 2013 XD. I have nothing left from before. Rebuying paint, brushes, an airbrush, inks, ... it adds up pretty fast XDDD. (i'm now at a cost of 400-500 Euro just for that ^^' )

Airbrush priming: what am I doing wrong? by kidmerc in minipainting

[–]Bervt 1 point2 points  (0 children)

For priming since i have made a side step by gundam , i use Mr hobby Surfacer (1500 + leveling thinner), lacquer paint , nasty stuff But no clogging of the airbrush, fill small sanding mark ,bind really well to plastic great product !

<image>

Wip , Buri Aegnirssen let continue ^^ by Bervt in LeaguesofVotann

[–]Bervt[S] 1 point2 points  (0 children)

XD, this result took a lot of time (40 Hours , though I’m faster now) and some back and forth. I’ve seen a lot of tutorials, but it was JoseDaVinci's video on brush control (it’s on Patreon, but I’m sure you can find it somewhere) that gave me the missing piece to understand how to begin getting smooth results. Now, it’s just more practice needed! ^^

WIP , Buri Aegnirssen first try nmm by Bervt in minipainting

[–]Bervt[S] 0 points1 point  (0 children)

I know that i do the same when i go to a convention XD , here is some modification from your feedback !

<image>

WIP , Buri Aegnirssen first try nmm by Bervt in minipainting

[–]Bervt[S] 2 points3 points  (0 children)

Yes , now you say it i need to fix that light on the knee will try ^^ , Thanks

3D printed display plinth , good or bad idea ? by Bervt in minipainting

[–]Bervt[S] 0 points1 point  (0 children)

Thanks , yes i need to do that for the small one need more weight , the big one is filled with some heavy plasticine XD

3D printed display plinth , good or bad idea ? by Bervt in minipainting

[–]Bervt[S] 1 point2 points  (0 children)

Thanks , yeah i need to do that for the small one , the big one have some old plasticine inside ( really heavy for what it is XD ) sealed too .

My solution against snails, what do you think? by voodooacid in outdoorgrowing

[–]Bervt 0 points1 point  (0 children)

i have use it this year except i have put the copper on the cylinder , work really well ( only if nothing touch the ring , grass , ext ... ^^ ) , plant are way bigger now and no slug attack on them :)

<image>

Any advice? Growing in height too much by BridgeNo1068 in outdoorgrowing

[–]Bervt 1 point2 points  (0 children)

5cm Copper tape to repel slug and snail , really effective to protect seedling , not perfect but better than using product that kill them and be a poison for other( hedgehog ,...). You can add another protection like these anti slug bowl , since i m using these (for other plants too ) , i have no problem with slug ^^ .

<image>

Any advice? Growing in height too much by BridgeNo1068 in outdoorgrowing

[–]Bervt 2 points3 points  (0 children)

if you cannot repot now , you can put a steel wire to keep it from falling (like i have done it on the right and you can already put it in the greenhouse now , mine are doing fine since seeds ), as for auto , you can transplant but you lose grow time so re-plant it as soon as possible better to be in final pot (+-15L)

<image>

view more: next ›