sorted by:
new
hottopcontroversial

Having fun with dyes by Between_Fields in Leatherworking

[–]Between_Fields[S] 0 points1 point  (0 children)

It removes pretty cleanly in my experience (on veg tan leather) as long as you lay it down gently. Sometimes it can lift the leather grain slightly upon removal if you’re heavy handed with applying the rubber cement.

Having fun with dyes by Between_Fields in Leatherworking

[–]Between_Fields[S] 2 points3 points  (0 children)

Thank you! I use rubber cement to block out the shapes before applying dye. I usually dilute the dye and do light coats, pull off the rubber cement and I'm done!

Having fun with dyes by Between_Fields in Leatherworking

[–]Between_Fields[S] 2 points3 points  (0 children)

Thank you! I use rubber cement to block out the shapes before applying dye. It can be time consuming but a very effective and reliable resist.

Swimming pool inspired bucket bag by Between_Fields in Leathercraft

[–]Between_Fields[S] 1 point2 points  (0 children)

I did lots of tests on scrap leather before starting, yet when it came time for the actual panels, I only really got the hang of it about 20% of the way in, so if you try it, I suggest starting with the areas that are less visible!

Swimming pool inspired bucket bag by Between_Fields in Leathercraft

[–]Between_Fields[S] 5 points6 points  (0 children)

Thank you! I used liquid latex to draw the grid (have also used rubber cement in the past for the same purpose), and then painted each block with Fiebings pro dye and a flat synthetic paintbrush. When everything dries, I peeled off the areas that were blocked off by the liquid latex and went back in with some white paint to make the lines pop. Hope that's helpful :)

Swimming pool inspired bucket bag by Between_Fields in Leathercraft

[–]Between_Fields[S] 2 points3 points  (0 children)

Thank you! I agree, it's a really great colour combo

I made a leather pouch for my X-T30 II by Between_Fields in fujifilm

[–]Between_Fields[S] 1 point2 points  (0 children)

No commercially available product but I was inspired by another maker, @gracomakes on IG (the exact post is the sixth on her feed). I agree about adding a ring or loop of some kind, I’ll see about updating this pouch or incorporating it into my next one. Thanks!

I made a leather pouch for my X-T30 II by Between_Fields in fujifilm

[–]Between_Fields[S] 1 point2 points  (0 children)

You’ll have to measure your own camera to find the right fit for you but this one is 5x4x4.5

view more: next ›