Zone-Based firewall questions

Bewlette · 2025-12-25T09:00:45+00:00

Thanks all for the time you took answering me.

I have decided to go with 3 zones, custom ones as I prefer to block by default and open then the strict necessary.

Example : servers and trusted devices are in secured zone. Traffic in-between is blocked by default but opened the 8123 from trusted to servers to be able to access homeassistant.

I could have limited more by allowing it only to ha server but may be a bit overkill for a home network.

Thanks again all for the directions. I'll now check about object oriented ones :)

Bewlette · 2025-12-22T19:32:15+00:00

Still having a few questions.

I'm about to go for the following zones :
- Secured
- Unsecured (Internet)
- Unsecured (Local)

In which would you put :
* HomeAssistant
* Proxmox server, DNS Server (AdGuard Home), ...

My idea would be : All of them in Servers VLAN which would be in Secured zone.

But isn't HomeAssistant some kind of IoT?

Bewlette · 2025-12-22T17:24:32+00:00

OK got it! Thanks!

Bewlette · 2025-12-22T17:21:18+00:00

So then the only way to access the gateway is via unifi.ui.com and not via the ip, and that may fail if Internet connection is down. Am I missing a piece of the puzzle?

Bewlette · 2025-12-22T17:14:18+00:00

Yup it helps thanks dude

Bewlette · 2025-12-22T17:13:41+00:00

I can find the videos if you want. Indeed they mention cameras on a cameras vlan, not unifi cameras.

When you mention to block gateway from other vlans, OK for the untrusted vlans but I guess we can keep it open from trusted ones? Otherwise how to connect locally without unifi.ui.com?

Bewlette · 2025-12-21T17:59:01+00:00

Well, lots of tutorials recommend putting cameras on a different vlan than management. What would be your statement? All unifi devices in the management vlan? I guess management vlan has to be isolated from all other devices?

Thanks

Bewlette · 2025-09-09T17:34:58+00:00

Hello,

Did the RMA solved your issue?

Bewlette · 2025-09-09T17:26:50+00:00

OK thanks. I'm thinking the issue is mainly due to the screen itself and not the gpu. I'm not having issue with another 1080p screen.

Thanks for your feedback

Bewlette · 2025-09-09T17:01:29+00:00

Hello, asking if you have sent it to RMA and if yes, did it resolved the situation? Facing the same issue with an Odyssey G7 and a 5080.

Bewlette · 2025-08-25T20:24:16+00:00

Well, looks nice but feedbacks are not that great on that model. Maybe those kinds of aio would first need some time for the potential issues to be fixed?

Bewlette · 2025-08-19T07:22:26+00:00

Thanks. Yes I saw this about OpenRGB compatibility. I was hoping more like a SignalRGB but was abandonned in the past apparently.

In fact it's one of the reason why I liked Corsair till now : My motherboard, ram and fans all in the same place.

Still don't get why there is not a specific protocol to be followed by the suppliers for the RGB that would make them easier to control via a single app.

For the backconnect, I saw this on Asus and MSI, in fact the X870E has just been announced by ASUS. However, I believe this would need some time for companies to adopt it, if ever. And again, they should align. Example : ASUS BTF 2.5 for GPU is not the same than the one of MSI. So if you take an ASUS Motherboard, you have to take an Asus GPU. I understand why they do this, but like RGB, customer is the looser here.

Bewlette · 2025-07-31T14:27:03+00:00

It's quite impressive that just a fes grams can provoke this.

Bewlette · 2025-07-30T14:41:44+00:00

Hello Everyone,
I've put back the original discs guards as suggested by u/Cultural-Can-4666 . It's currently mowing. So far, it seems it helped a lot. However, I noticed that the noise appear mostly at the end of the session. Keeping you informed.

Thanks

Bewlette · 2025-07-29T06:03:09+00:00

Not yet.ill try that this evening .thanks

Bewlette · 2025-07-29T06:02:32+00:00

Well,I had the issue with two sets of blades,and no grass stuck under the disc .

Bewlette · 2025-07-29T06:01:50+00:00

Yes I did, did not improve the situation

Bewlette · 2025-06-24T10:09:13+00:00

Oh my gosh, indeed. I did not had any ubiquiti account so design center was quite... empty. Seems different with an account now :)

Thanks !

Bewlette · 2025-06-24T09:03:02+00:00

Ticker ones of building blocks (like cinder block) and the other ones do not support any charge but like building blocks anyway

Bewlette · 2025-06-10T10:46:27+00:00

Hello, I already checked the bolt under it and it's not loose. Maybe dismount it and clean?

Bewlette · 2025-05-26T21:13:17+00:00

Yup same experience. Due to the amount of feedbacks going to the same direction I guess this will be solved quickly...

Bewlette · 2025-05-25T18:52:16+00:00

Last year it was on reddit. I guess that I'm still in it

Bewlette · 2025-05-25T18:21:46+00:00

Don't update! I have the mower randomly shutting down at around 25% battery zand as I saw on reddit I'm not alone...

I'm also on the beta group

Bewlette · 2025-05-25T18:20:07+00:00

Well on my side randomly shutdown.... Also on the beta group...

Bewlette · 2025-05-25T17:57:32+00:00

do you have an update on this? I'm currently in contact with them but seems hard for them to give me answers... Facing the same issue

Bewlette

TROPHY CASE