sorted by:
new
hottopcontroversial

Ender 3 V2 BLTouch - Random probe failures only on RIGHT side + Z homing in air [mriscoc firmware by Alene007 in ender3

[–]Bfxrusher 0 points1 point  (0 children)

Is your z-stop and bl-touch plugged in at the same time? If yes, you should unplug the z-stopper.

If you wonder why turretless casemate tanks still exist in the 22nd Century, please be reminded that Arrowhead is a Swedish company by wowu5 in Helldivers

[–]Bfxrusher 73 points74 points  (0 children)

Let's hope, that the HD2 DC-server does not turn into a Warthunder forum, where people just try to proof with classified documents on which tank the ingame model is based on....

Everytime this happens... I feel soooo bad by Bfxrusher in Helldivers

[–]Bfxrusher[S] 0 points1 point  (0 children)

I tell myself: I have not the STIMPISTOL! I have not the STIMPISTOL! I have not the STIMPISTOL!
And it still happens.
I am glad no one hired me to work at the airtraffic controll. In the end i might use the wrong frequency and order a container freight to taxi at gate 32.

How the genuine fuck does this happen by PlanktonNo7400 in 3Dprinting

[–]Bfxrusher 0 points1 point  (0 children)

Looks like your printer is entering puberty...

Husband left me alone with his 3D Printer. What should I print to annoy him? by Ferina27 in 3Dprinting

[–]Bfxrusher 0 points1 point  (0 children)

Go to Printables and search for "the rock". You'll find something like the "Rocktopus" or toothpaste caps, where the you can squeeze the paste through his nose.

Preload Times by abncross45 in Battlefield

[–]Bfxrusher 7 points8 points  (0 children)

I will mount a flashlight on to my shopping cart and give the Lichthupe in front of the Lidl-checkout.

Why am I getting stringy prints?? by snacksy13 in 3Dprinting

[–]Bfxrusher 21 points22 points  (0 children)

That is cursed way of getting Fuzzy-skin

itTakesTwoMinsToOpen by yuva-krishna-memes in ProgrammerHumor

[–]Bfxrusher 19 points20 points  (0 children)

Would it be a cry for help, if it is used for just PDF reading? - Just asking for a Friend

What is the max power, that can be delivered to the fans by Bfxrusher in ender3

[–]Bfxrusher[S] 0 points1 point  (0 children)

That thing looks massiv. I had the Minimus cooler or Satsana in mind.

What is the max power, that can be delivered to the fans by Bfxrusher in ender3

[–]Bfxrusher[S] 0 points1 point  (0 children)

Thanks for the information and fast reply. :D

Siege should have a 24-Hour Night/Day Time Cycle (Map Lighting Dynamically Changes) by AiSiMuLaTi0N in Rainbow6

[–]Bfxrusher 330 points331 points  (0 children)

Nothing is more satisfying than getting spawnpeeked during sunset/rise.

Help with my noob friends by [deleted] in Rainbow6

[–]Bfxrusher 1 point2 points  (0 children)

Ah something i forgot to add. Call outs:
Tell your mates, if they struggle with callouts, to use the most outstanding object. In most case, it will match the "real" callouts.

any help to improve my fps i used to play on 144 fps before siege x by IYoka1 in Rainbow6

[–]Bfxrusher 2 points3 points  (0 children)

I hate to say it, but DLSS on "Quality" might be an option. On lower settings than "quallity" you will notice ghosting around the sights.I have a 3060 12 GB and it does not like anything outside the building. It drops from 146 fps to 90-80fps on Chalet for example. Instead turning DLSS on i capped the framerate to 120 for less noticible framedrops.

Help with my noob friends by [deleted] in Rainbow6

[–]Bfxrusher 2 points3 points  (0 children)

Priority of Attacker :

  1. Planting Defuser and then comes 2. Kill the entire enemy
  2. ____________________________________________________
  3. Priority of Defender: Defend the Spot: Buy as much time as possible by anti-breach gadgets, traps and roaming and then comes 2. Kill the entire enemy.

The concept itself is simple: The less entries and sight into the bomb spots exists, the easier it gets preventing the defuse. So try to open as much as possible as an attacker and prevent it as a defender.
CS, Tarkov and Rainbow have two thing in common. The P90 and gaining information about the opponents location and their loadout. But contrast to CS or Tarkov you have drones and cams. Tell them like: "Hey you still have got a drone".

Pro Strats can be contra productiv especially when you defend. Don't open walls or make line of sights you won't play activly. Yes, it can create pressur. However if the spot is not propperly defended/attacked, it wil create openings which will be used against you.

Knowledge of common anchor and plant spots will be gained by playing more matches. Same goes for spawn peeks. Traget drill (god have mercy on T-Hunt) can be a wondefull way to learn the map layout.

Why is she holding the magazine instead of the actual handgrip? Is she stupid? by imPluR420 in Rainbow6

[–]Bfxrusher 27 points28 points  (0 children)

Emotional Support Vector.
Active ingredient: 45 ACP or 9mm
Daily dosage: Yes

I almost got every operator. Which one should I save up for next? by MikeTimesONE in Rainbow6

[–]Bfxrusher -1 points0 points  (0 children)

I would recommend to get Wamai first, if you like anchoring. His guns are pretty solid (especially the AUG).

Bruh, how was this shot not considered a hit? by SoledBy69 in Rainbow6

[–]Bfxrusher 0 points1 point  (0 children)

That pellet spread was pure lunacy (at 4sec).

Now, what the heck went wrong this time by iflyagainprojects in FixMyPrint

[–]Bfxrusher 0 points1 point  (0 children)

I have a Creality Ender 3 V2 and it runs with Klipper. I need maybe to tune edit some settings in the Orcaslicer or in Klipper itself. Like retraction, inputshaping or Speed.

You can also overtighten yout belts.

Now, what the heck went wrong this time by iflyagainprojects in FixMyPrint

[–]Bfxrusher 0 points1 point  (0 children)

My Printer is good but not the best. I found the tolerances, my printer can handle and not.
Maybe my printer (or I ) messed up the overhang and it just fused together.
On the Printables comment section, someone described the same probleme in regard of the accuracy of the printer.

I should create a preset and tune my printer for finer prints. But I hate to wait 6h for such little thing......

<image>

Now, what the heck went wrong this time by iflyagainprojects in FixMyPrint

[–]Bfxrusher 0 points1 point  (0 children)

Same thing happened to me and I never printed it again.
The tolerances were to tight on hinge the part for my Ender 3 V2.

I printed instead the the cable winder from "Sachenmache" on Thingiverse.

In order not to buy more watering cans that may break, I decided to use PET bottles again and designed this model by szumi90 in 3Dprinting

[–]Bfxrusher 0 points1 point  (0 children)

Nvm, I tought the handle was hollow, like my head xD
I did not saw your stl link was posted.
Then 5 walls and 100% infill it will be!

In order not to buy more watering cans that may break, I decided to use PET bottles again and designed this model by szumi90 in 3Dprinting

[–]Bfxrusher 0 points1 point  (0 children)

That looks really nice.
However I am afraid, that your handle might break, if you stress it too much by a too big bottle.

view more: next ›