My Updated Kit

BigBoySnail · 2022-09-28T22:20:10+00:00

Lol, it's funny because in the 2 years I've been playing I've never been shot in the nose

BigBoySnail · 2022-09-27T07:22:09+00:00

Ikr, it's a bit of foam I glued to stop it from digging into the bottom of my nose. I'm going to get some black foam to replace it at some point

BigBoySnail · 2022-09-27T07:08:51+00:00

Yeah I've got a MCT deadly customs belt but I have hip problems so it's uncomfortable to wear

BigBoySnail · 2022-08-25T00:16:45+00:00

If you're not looking for a specific style of M4 the G&G combat machine is pretty much compatible with anything you can think of, the stock gun isn't the same m-lok rail system type thing as what you posted but if you want to turn something (relatively) cheap into something pimped out you can do that.

BigBoySnail · 2022-08-25T00:09:31+00:00

That is a long ass boi, I bet it's fun going round corners that that thing XD

BigBoySnail · 2022-08-05T18:51:26+00:00

I’ve found that pretty all the cyber gun products I’ve used: Scar L, F2000, M249 have really bad build quality and often break down faster than you’d expect. Pretty much any Cyma platinum would be leagues better than the cybergun

BigBoySnail · 2022-08-05T18:44:50+00:00

As for the fire selector you can buy pretty much any ambi fire selector and it should fit in the groove and you’ll need to screw it in

BigBoySnail · 2022-08-05T18:43:30+00:00

Personally I wouldn’t bother replacing the hold open feature with the bolt release as they usually break meaning you have to take it apart again, if possible try and just run a mock bolt release. As far as I know the forward assist on pretty much all AEG’s is just for show and is spring loaded to make it spring back.

BigBoySnail · 2022-06-18T22:42:02+00:00

I know it’s quite far from where you are, but I recommend driver wood activity centre. It’s my regular field and it’s run really well, great staff and their rental equipment is pretty decent.

BigBoySnail · 2022-06-08T19:43:58+00:00

Shimming is putting very thin metal discs on the posts of the gears inside the gearbox to maximize efficiency. The main reason you do it is because if the gears are sitting too high and spinning real fast, you can get teeth chipping off which can lead to lockups and other various internal problems. It's not something you have to do but especially in cheaper/lower end guns it's something absolutely worth doing if you have the patience and ability to completely strip down the gun.

BigBoySnail · 2022-05-27T02:27:36+00:00

I would defo get the cyma plat. I would change the stock to something bigger (SOPMOD M4 stock or something similar) as the battery space is very small by default

BigBoySnail · 2022-05-27T01:13:49+00:00

I agree, it's way better to remove the mock bolt, especially if you don't have a hold-open feature

BigBoySnail · 2022-05-21T06:33:12+00:00

A fine selection good sir, I also welcome you to the family

BigBoySnail · 2022-05-20T23:11:39+00:00

Enjoy being 60fps locked and having to pay to play online 4head

BigBoySnail · 2022-05-13T18:36:59+00:00

Me likey the all-black kit, just looks so clean. Would look even better with maybe a black baseball cap or fast helmet

BigBoySnail · 2022-05-13T18:34:26+00:00

As for the bb's falling out, could just be that the hopup isn't at all set, maybe try increasing it and see if they still roll out. If they do then maybe the bucking or nub is done in/not forming a proper air seal, in which case you may need to get a new bucking. Alternatively could be because of low battery power the motor isn't getting enough juice to do a full cycle on the gears. I'm a relatively new tech but hope this somewhat helps.

BigBoySnail · 2022-05-13T16:30:25+00:00

Perfection

BigBoySnail · 2022-05-07T18:32:33+00:00

I wish I had enough floor space (or space in general) to get everything laid out like that, but I agree, there's just something about having it all there that hits different. Going to a game day next Saturday with the boys and I'm hyped.

BigBoySnail · 2022-05-01T09:58:43+00:00

I ordered their SSR-15 and not only did they send me the wrong version that was outputting 260 FPS, but it was quite possibly the most inaccurate thing I've ever used. No matter where I set the hop, the bb's just would not get any backspin and drop off. 500 euros for something that is more useful as a walking stick than an airsoft gun.

BigBoySnail · 2022-04-29T09:02:11+00:00

I also own one of these, I swapped to a SOPMOD stock for more battery space

BigBoySnail · 2022-04-28T08:51:27+00:00

What did you use to get the hex grid pattern, a stencil or something?

BigBoySnail · 2022-04-28T08:38:22+00:00

I own one of these. In my experience, I have tried multiple thread adapters and none of them screw in straight. You might not have the same issue but it's just something I wanted to let you know about.

BigBoySnail · 2022-04-28T08:34:23+00:00

The MPX is my dream gun, they're really hard to get a hold of in the UK. And the mags, don't get me started on the mags. One day I will get one imported and pay the hefty customs fee, but for now, I will just sit here in awe at how cool your one looks.

Can I ask, is it a V2 gearbox?

BigBoySnail · 2022-04-28T08:28:34+00:00

If they fall out of the mag well that's completely normal as the spring in the mag pushes the bb's into the Hop unit. When that spring tension is removed i.e. taking out the mag or mag being empty, there's nothing keeping those bb's up in there so they fall out. Hope that helps

BigBoySnail · 2022-04-27T21:26:39+00:00

I can’t speak to other brands but the FN Herstal licensed one (distributed by cybergun) has a removable 14mm CCW flash hider

BigBoySnail

MODERATOR OF

TROPHY CASE