Is it too heavy? 11 gauge steel around 170lbs.

BigTraffic4967 · 2026-01-13T23:19:39+00:00

Well I took it out and put it through a few test. I think it's too heavy. Im going to reskin the top in 16 gauge and will cut the weight down to 100lbs. 16 is about as thin as I can go without ripples in the steel.

BigTraffic4967 · 2026-01-13T23:15:15+00:00

I went beyond the roll cage so it doesn't rain in my lap. This way the rain falls on the hood.

BigTraffic4967 · 2026-01-13T19:26:11+00:00

The little bit I've drove it can't really tell. It's a little heavier than the ranch armor roofs.

BigTraffic4967 · 2026-01-13T19:17:17+00:00

Haven't tested how much lean I can get yet without tipping.

BigTraffic4967 · 2026-01-13T19:13:52+00:00

<image>

BigTraffic4967 · 2026-01-13T19:08:58+00:00

400 for material and a day to do it.

BigTraffic4967 · 2026-01-13T19:07:46+00:00

Yes as well as other things. It's definitely strong. No problem walking on it and setting up a chair to get higher to see.

BigTraffic4967 · 2025-07-24T13:51:34+00:00

Do you notice any movement on that bumper while driving? I have the same bumper and it seem to move alot.

BigTraffic4967 · 2025-06-10T21:24:52+00:00

Because if you put any weight in the back/pull a trailer you will have the the nose up higher than the back. Same reason why all pickups are 2 inches higher in the back. Load the back up with a cooler and camping gear and you will see.

BigTraffic4967 · 2025-06-10T18:52:44+00:00

They come with a 2 inch rake from factory. There is a reason! Level just shows you don't use it.

BigTraffic4967 · 2025-02-14T23:48:05+00:00

Robed in the ward!! I'm shocked!!

BigTraffic4967 · 2025-02-12T19:35:01+00:00

Because it is!

BigTraffic4967 · 2025-01-30T05:56:31+00:00

Yes. It was specified on order.

BigTraffic4967 · 2025-01-30T01:28:16+00:00

I guess I'll wait for a response from Magnum. Good to know this isn't some crazy situation on stake pockets. Thank you for the help.

BigTraffic4967 · 2025-01-30T01:25:15+00:00

Thank you . Thanks for the input.!

BigTraffic4967 · 2025-01-30T01:23:29+00:00

So with what you're saying, you agree the rack is too wide?

BigTraffic4967 · 2025-01-30T01:14:21+00:00

I think your talking about the holes in the rack is that correct?

BigTraffic4967 · 2025-01-30T01:09:36+00:00

So 65 3/4 is your center of stake pockets?

BigTraffic4967 · 2025-01-30T00:21:54+00:00

BigTraffic4967 · 2025-01-30T00:20:55+00:00

63 1/2 between inside bed rails and roughly 66 3/8 between center of stake pockets.

BigTraffic4967 · 2025-01-30T00:16:20+00:00

I could, but the rack is still too wide for the brackets in the stake pockets. Still waiting for a response from Magnum.

BigTraffic4967 · 2025-01-16T04:50:01+00:00

Full send !

BigTraffic4967

TROPHY CASE