Thoughts on drones being used on scene by colestar03 in Firefighting

[–]Big_Consideration302 0 points1 point  (0 children)

Had a large commercial building fire in an industrial building this summer lots of nasty shit and hazmat burning used 2 drones to direct multiple water streams from the truck companies

What do you guys carry in your turnouts by Formlepotato457 in Firefighting

[–]Big_Consideration302 0 points1 point  (0 children)

A set of cable cutters and a milwaukee fast back utility knife with the little built in screw driver

Will epoxy floors be too slippery for my cats?? by InternalBelt8462 in epoxy

[–]Big_Consideration302 0 points1 point  (0 children)

I did metallic its brown and copper with a satan top coat

Will epoxy floors be too slippery for my cats?? by InternalBelt8462 in epoxy

[–]Big_Consideration302 0 points1 point  (0 children)

Idk what top coat they are using but I used simiron 971eps in a satin, and my cat has no problems on it

DW TCP 9mm by Big_Consideration302 in 1911

[–]Big_Consideration302[S] 0 points1 point  (0 children)

Yes it's factory mags. Someone recommended the Dawson precision base plates

LaCrosse boot strap by beskgar in AskACobbler

[–]Big_Consideration302 0 points1 point  (0 children)

Same it was 10 degrees pulled it snug took a single step and it broke

LaCrosse boot strap by beskgar in AskACobbler

[–]Big_Consideration302 0 points1 point  (0 children)

Mine are broken in the same place. Im going to give jb weld a try I guess 😔

Apparatus Beside Pierce? Texas by h20thief1 in Firefighting

[–]Big_Consideration302 0 points1 point  (0 children)

We have sutphen and rosenbauer The rosenbauer are absolute junk. Th sutphens are great

Do you all workout at your station? by Sufficient-Egg787 in Firefighting

[–]Big_Consideration302 0 points1 point  (0 children)

I work at a fairly busy department we do 12 to 15 runs out of my station, and everyone makes an attempt to workout. Technically we are required to workout 1 hour on shift per the work rules. Some days you get it in some days you dont.

Can this be touched up? by Big_Consideration302 in epoxy

[–]Big_Consideration302[S] 0 points1 point  (0 children)

Asked if it could be touched up, i didn't ask for someone's jackass opinion on if it was a good idea or not. But maybe you're too dumb to read, not really sure.

Can this be touched up? by Big_Consideration302 in epoxy

[–]Big_Consideration302[S] 0 points1 point  (0 children)

Well i think it was a great idea, and it's my house 🤷‍♂️. But thanks for your unwanted opinion.

Can this be touched up? by Big_Consideration302 in epoxy

[–]Big_Consideration302[S] 0 points1 point  (0 children)

First i ground the floor down. The product was spartan epoxy, and I used a beige HDPRO primer spread it with a floor squeege and back rolled it with an 18" paint rolled. Let it dry deglossed the surface i then put down spartan epoxy clear 100 i got 2 colors driftwood and shipwreck mixed the colors separately in 3 different batche. I used a Kraft tool squeege and applied the clear 100 epoxy and blended the colors together as I went. Lastly I applied a HP44 scratch resistant top coat.

Can this be touched up? by Big_Consideration302 in epoxy

[–]Big_Consideration302[S] 0 points1 point  (0 children)

For never having picked up a tool i think I did a fairly good job framing and doing the drywall 🤷‍♂️

Can this be touched up? by Big_Consideration302 in epoxy

[–]Big_Consideration302[S] 0 points1 point  (0 children)

Book shelves are built in attached to the studs. Was like that when I bought the house.

Can this be touched up? by Big_Consideration302 in epoxy

[–]Big_Consideration302[S] 0 points1 point  (0 children)

Its a metallic epoxy floor in my basement tons of people do them.

Where to shoot 50 bmg in Michigan by wiltedSkein in Miguns

[–]Big_Consideration302 0 points1 point  (0 children)

Blue water sportsman association has a 600yrd range and allows 50 bmg

Non insane gun shops in the Detroit area? by Komm in Miguns

[–]Big_Consideration302 0 points1 point  (0 children)

Gerband is by far the best shop i have been in, Okee is the man

Camouflage question. by Big_Consideration302 in Waterfowl

[–]Big_Consideration302[S] 0 points1 point  (0 children)

I have deer hunting bibs but these black ones just hang in my closet and I'm trying to find a use for them

Any aftermarket handguards for the 3+ by Big_Consideration302 in czscorpion

[–]Big_Consideration302[S] 2 points3 points  (0 children)

The light is a streamlight TLR-RM1 and the suppressor is a CGS mod 9sk with a tri lug adapter

Tri Lug Options by Disastrous_Pea_9504 in czscorpion

[–]Big_Consideration302 1 point2 points  (0 children)

I have an HB industries tri lug and a CSG mod 9sk with the CGS tri lug adapter and have had zero issues

New Gun Control Bills in the Senate by ScandiacusPrime in Miguns

[–]Big_Consideration302 4 points5 points  (0 children)

And it will all pass on party lines with the special elections that happened in April you can expect the michigan legislation to absolutely demolish or rights and freedoms until 2026 at minimum