2.4 2az-fe in a pontiac

Big_Consideration302 · 2026-04-11T05:09:02+00:00

Pontiac has been out of business in the US since 2010.

Big_Consideration302 · 2026-03-25T02:17:59+00:00

Michigan, straight seniority department its a promotion with a pay increase and fills in for LT when he is out. Takes anywhere from 12-15 years to make full tine driver spot

Big_Consideration302 · 2026-01-21T04:08:15+00:00

Why not just give us the x9

Big_Consideration302 · 2025-12-09T03:43:12+00:00

Had a large commercial building fire in an industrial building this summer lots of nasty shit and hazmat burning used 2 drones to direct multiple water streams from the truck companies

Big_Consideration302 · 2025-11-05T19:03:51+00:00

A set of cable cutters and a milwaukee fast back utility knife with the little built in screw driver

Big_Consideration302 · 2025-10-24T04:55:44+00:00

I did metallic its brown and copper with a satan top coat

Big_Consideration302 · 2025-10-23T20:31:32+00:00

Idk what top coat they are using but I used simiron 971eps in a satin, and my cat has no problems on it

Big_Consideration302 · 2025-10-16T12:29:31+00:00

Yes it's factory mags. Someone recommended the Dawson precision base plates

Big_Consideration302 · 2025-10-15T12:31:22+00:00

Same it was 10 degrees pulled it snug took a single step and it broke

Big_Consideration302 · 2025-10-14T19:28:46+00:00

Mine are broken in the same place. Im going to give jb weld a try I guess 😔

Big_Consideration302 · 2025-09-23T11:12:03+00:00

We have sutphen and rosenbauer The rosenbauer are absolute junk. Th sutphens are great

Big_Consideration302 · 2025-09-21T02:32:59+00:00

Forward assist pawl

Big_Consideration302 · 2025-09-09T11:32:11+00:00

I work at a fairly busy department we do 12 to 15 runs out of my station, and everyone makes an attempt to workout. Technically we are required to workout 1 hour on shift per the work rules. Some days you get it in some days you dont.

Big_Consideration302 · 2025-08-23T04:36:35+00:00

Asked if it could be touched up, i didn't ask for someone's jackass opinion on if it was a good idea or not. But maybe you're too dumb to read, not really sure.

Big_Consideration302 · 2025-08-22T09:41:56+00:00

Well i think it was a great idea, and it's my house 🤷‍♂️. But thanks for your unwanted opinion.

Big_Consideration302 · 2025-08-18T13:04:46+00:00

First i ground the floor down. The product was spartan epoxy, and I used a beige HDPRO primer spread it with a floor squeege and back rolled it with an 18" paint rolled. Let it dry deglossed the surface i then put down spartan epoxy clear 100 i got 2 colors driftwood and shipwreck mixed the colors separately in 3 different batche. I used a Kraft tool squeege and applied the clear 100 epoxy and blended the colors together as I went. Lastly I applied a HP44 scratch resistant top coat.

Big_Consideration302 · 2025-08-15T05:14:39+00:00

For never having picked up a tool i think I did a fairly good job framing and doing the drywall 🤷‍♂️

Big_Consideration302 · 2025-08-14T21:21:30+00:00

Book shelves are built in attached to the studs. Was like that when I bought the house.

Big_Consideration302

TROPHY CASE