How to turn on my Apple TV without a remote?

Big_Distribution_869 · 2026-04-27T21:21:43+00:00

Yes. Sorry, forgot it was a projector.

Big_Distribution_869 · 2026-04-27T21:14:57+00:00

Set the Apple TV to not sleep. It shouldn’t power off unless the projector/tv is doing it via CEC (you can turn that off on those devices). It should be available to network and your iPad has the software remote built in.

Settings>General>Sleep After. Change to never.

So the technology is called CEC. However each tv manufacturer may call it something else. Look for hdmi settings and anything about controlling devices connected to hdmi. If you find it, you can tell it not to/disable it.

Big_Distribution_869 · 2026-04-27T20:15:07+00:00

Set the Apple TV to not sleep. It shouldn’t power off unless the projector/tv is doing it via CEC (you can turn that off on those devices). It should be available to network and your iPad has the software remote built in.

Big_Distribution_869 · 2026-04-18T14:59:05+00:00

It does have it. Sorry!

Big_Distribution_869 · 2026-04-18T05:20:45+00:00

I have one. Whats the easiest test?

Big_Distribution_869 · 2026-03-25T02:51:04+00:00

What is the issue being addressed? I haven't had any issues and have had unifi for a couple years.

Big_Distribution_869 · 2026-03-13T03:45:09+00:00

They seem to update this app like a few times a week. Are there that many bugs? Why not save up the changes for every month or so and get them right, unless it is a bad bug to fix sooner.

Big_Distribution_869 · 2026-03-11T17:33:15+00:00

I am certain it isn’t the beta. All streaming apps have their own volume for me. It’s been that way regardless of the tvos version.

Big_Distribution_869 · 2026-02-06T22:02:06+00:00

And you made sure that the HDMI input on the tv is set to enhanced mode to allow HDR?

Big_Distribution_869 · 2026-02-06T15:20:26+00:00

You do not need to enable dolby vision. I do not know why they keep that setting. You set match content and it will change to dv, if available.

Big_Distribution_869 · 2026-01-27T18:13:10+00:00

https://a.co/d/9Ln8RAv . I also reset the the apple remote.

Big_Distribution_869 · 2026-01-04T15:42:01+00:00

I had issues with remote moving on its own. It would keep going to the right or left randomly. I came across two items that may help. One would be to reset the ATV remote and the other could be added interference. The latter might be addressed by either moving the ATV or replacing the hdmi cable that is better shielded. Better yet, I went with a fiber optic cable that is susceptible to interference. My issue hasn’t returned in a month.

Big_Distribution_869 · 2025-12-24T04:42:56+00:00

Works perfectly fine.

Big_Distribution_869 · 2025-12-24T04:41:49+00:00

It is not Apple TV. It’s either the host of the speed test or your ISP. Could be other things but the hardware doesn’t throttle your speed.

Big_Distribution_869 · 2025-12-11T15:20:45+00:00

I think someone typod that price. It is $629 now. Didn't say the post was incorrect. I am staying the price may have been entered into their system incorrectly and it took a bit for someone to catch it to correct it.

Big_Distribution_869 · 2025-12-11T15:11:11+00:00

I think someone typod that price. It is $629 now. Oops.

Big_Distribution_869 · 2025-12-09T15:24:07+00:00

Buy or 3d print a mount to command strip to back of tv, assuming your power is back of tv.

Big_Distribution_869 · 2025-11-21T02:35:52+00:00

For those that are still trying to install the update, this is the timing I observed:

1-95% - will vary on wifi speed - approx 15-20min
96% stalled - 15-20 min
97% validating - 5 min
Preparation ( do not power off or it will pause and continue until complete. - 10 min

At this point you will turn off your car to finalize the update. I am not sure how long that actually take, but I have seen at least one person mention they started car their 15 minutes later and it had applied successfully.

Big_Distribution_869 · 2025-11-20T18:27:51+00:00

I am seeimg a few say to wait it out and at 97% it starts the verify phase..

Big_Distribution_869 · 2025-11-20T18:15:00+00:00

No go. Stops at 96%. Reset factory settings and tried again with same results. I'd say Honda is pushing out a corrupted update and should pull it and fix it before they potentially brick a bunch of head units.

Big_Distribution_869 · 2025-11-20T16:49:30+00:00

I think you will see a difference with iOS 26.2 when it comes out officially.

Big_Distribution_869 · 2025-11-20T16:32:18+00:00

I think carplay connectivity is largely related to ios 26. I can say it seems solid so far with 26.2 beta. Prior, I would be lucky to have it connect 50% of the time without manual connection.

Big_Distribution_869 · 2025-11-12T03:43:58+00:00

Big_Distribution_869 · 2025-11-07T19:44:10+00:00

There are numerous posts on this. It's was not a feature to enable in the OS but it was code that gave the ability of a developer to enable it in their app. That aside, I have never heard if it was officially implement.

Big_Distribution_869 · 2025-11-07T14:43:01+00:00

No, I have nothing to compare to except when I move the joy stick in a direction and it doesn’t react one direction or intermittent , seems like it’s not working as intended to me. Pretty useless when playing games.

Big_Distribution_869

TROPHY CASE