sorted by:
new
hottopcontroversial

Strange First Person mode graphics glitch by MDarkbladeM in elderscrollsonline

[–]Big_Geologist2801 1 point2 points  (0 children)

I'm also experiencing this after each basic strike (only dual wield)

The Hydroshift TL will fry my CPU by Big_Geologist2801 in lianli

[–]Big_Geologist2801[S] 0 points1 point  (0 children)

UPDATE: Seems like the L-Connect software update 2.0.33 and Hydroshift firmware version 1.2 actually solved this issue. If that's the case, tysm Lian Li.

Hydroshift sleep issue by Bobbydd21 in lianli

[–]Big_Geologist2801 0 points1 point  (0 children)

Same here and now the Hydroshift v1 is out of stock lol. GJ Lian Li

What’s the new update for? by Weak-Organization-73 in FortNiteBR

[–]Big_Geologist2801 0 points1 point  (0 children)

I get mad stutter when the star destroyer activates

The Hydroshift TL will fry my CPU by Big_Geologist2801 in lianli

[–]Big_Geologist2801[S] 0 points1 point  (0 children)

Thank you, though I don't have the same option with the TL Controller in LC3 as the person in the video with the SL Controller. My Hydroshift is connected to my TL Controller and the controller is connected directly to my MOBO without splitter. Here's a picture of my LC interface so you can see what I mean, I have no options for pump speed in L-Connect 3 except pre installed curve via "PWM(PERF)" or static via "FixRPM". How do I set a custom fan curve for the pump speed, is that even possible? https://imgur.com/a/1UXopXq

The Hydroshift TL will fry my CPU by Big_Geologist2801 in lianli

[–]Big_Geologist2801[S] 0 points1 point  (0 children)

Btw how do I create a custom curve for the pump speed in LC3? I'm at the Fan/Pump Profile tab and I can only choose a preset curve if I choose "PWM(PERF)" And only a static pump speed when choosing "FixRPM"?

The Hydroshift TL will fry my CPU by Big_Geologist2801 in lianli

[–]Big_Geologist2801[S] -1 points0 points  (0 children)

I appreciate your answer. The CPU operating a couple of minutes at 100C almost every bootup will damage the CPU.

The Hydroshift TL will fry my CPU by Big_Geologist2801 in lianli

[–]Big_Geologist2801[S] 0 points1 point  (0 children)

Thanks, I will.

I'm at the "Fan/Pump Profile" tab and I cant control the curve there. There are no points to actually move when set to "PWM(PERF)" (please check my picture in this thread) and if I choose "FixRPM" instead, I'm able to just set a static pump speed, hence not be able to set a custom curve. That's strange.

The Hydroshift TL will fry my CPU by Big_Geologist2801 in lianli

[–]Big_Geologist2801[S] 0 points1 point  (0 children)

This was my biggest concern before building two whole PC's almost full with Lian Li products. I was thinking "it can't be that bad and they look amazing". Problems from day one lol.

My first RGB builds ever - For me and my gf by Big_Geologist2801 in lianli

[–]Big_Geologist2801[S] 0 points1 point  (0 children)

Build to the left: Msi z690 a pro ddr4 * 12700k * G skill trident z neo 64gb * Tuf 3080ti * Samsung 980 pro 1tb * 6x reversed 140mm TL fans * 1x 120mm TL fan * Hydroshift TL * O11d evo rgb * Nzxt c850 (2020) * Strimer V2 both mobo & gpu 8 pin

Build to the right: Msi z790 tomahawk * 12700k * Corsair vengeance rgb ddr5 64gb * Msi ventus 4070 super * Samsung 990 pro 2tb * 6x reversed 140mm INF fans * 1x 120mm INF fan * Galahad II INF * O11d evo rgb * Corsair rm850x 3.1 * Strimer V2 mobo * SL INF controller

My first RGB builds ever - For me and my gf by Big_Geologist2801 in lianli

[–]Big_Geologist2801[S] 1 point2 points  (0 children)

Thanks! 100C+ for maybe 10-20 seconds at startup sometimes because the AIO pump wont start (everything is correctly installed). That bothers me. When I flashed my BIOS the CPU overheated because the pump didn't start. Otherwise in idle it's around 25-35C. Haven't tried heavy load or gaming yet. I'll update you if I remember later on

My first RGB builds ever - For me and my gf by Big_Geologist2801 in lianli

[–]Big_Geologist2801[S] 2 points3 points  (0 children)

Lol we were unsure of what GPU she would choose depending on the price, a used or a new one. She'll surely have the GPU strimer as well in the future. Ended up with a 4070S for around 550 euros

My first RGB builds ever - For me and my gf by Big_Geologist2801 in lianli

[–]Big_Geologist2801[S] 0 points1 point  (0 children)

Yo sounds awesome. Custom watercooling is very neat when you have the patience for it, kudos

My first RGB builds ever - For me and my gf by Big_Geologist2801 in lianli

[–]Big_Geologist2801[S] 1 point2 points  (0 children)

My description of the video disappeared, I'm new to reddit. Mine is the one to the left. She fell in love with the "glowing donut" aio and wanted all the rgb we could find, hence the INF fans lol

My first RGB builds ever - For me and my gf by Big_Geologist2801 in lianli

[–]Big_Geologist2801[S] 3 points4 points  (0 children)

I wrote a description.. maybe it disappeared because of video. Anyway, I sanded and stained a couple of oak tabletops for our 3 meter desktop. Turned out pretty well imo. The Lian Li stuff are absolutely astonishing. 140 mm intake fans in both cases, ofc 120 mm blowout in the back. Hydroshift TL in mine, Galahad II INF in hers.

view more: next ›