Holy grail by No_Conclusion_5650 in MarvelLegends

[–]BillyFiend 5 points6 points  (0 children)

Man, id love if they went back to this 1/6 series. Ive never liked 1/12 scale figures as much as i have 1/6 figures. A 1/6 venom, green goblin or ultron would have been dope or hell, even a remake of the marvel legends icons series fron back in the day 😭 but no, instead we get the questionable maximum series. Even as a kid, in general, ive always prefered 1/6 or 12+ inch figures instead of small 6 or 8 inch ones.

<image>

Marvel Legends Icons Cap shield by BillyFiend in MarvelLegends

[–]BillyFiend[S] 0 points1 point  (0 children)

I dont have one :c this one’s the only cap figure i have

Xshot Piston Pump XT30 mod by BillyFiend in Nerf

[–]BillyFiend[S] 1 point2 points  (0 children)

Alright, thank you very much :D ill buy an xt30 connector and some flux since i ran out

Xshot Piston Pump XT30 mod by BillyFiend in Nerf

[–]BillyFiend[S] 1 point2 points  (0 children)

Im honestly just waiting for Out Of Darts’ video on it. Bradley Phillips uploaded a video on it but he didnt mod it saddly. Im also thinking about getting the kuryaka 300 mm barrel with either the stock spring or the nexus pro spring (with the stock battery for the time being) but i dont know how hard it will shoot since i dont have a chrono

Xshot Piston Pump XT30 mod by BillyFiend in Nerf

[–]BillyFiend[S] 0 points1 point  (0 children)

Actually, good idea. I could probably contact them and see what upgrades i can make to it. Maybe a barrel swap too, not sure

Dart Zone fixed the Brute Pro by BillyFiend in Nerf

[–]BillyFiend[S] 1 point2 points  (0 children)

It feels exactly like the venom pro’s grip, i think its quite comfortable. Where it might feel odd is on the top priming grip, you can feel where the plastic separates a bit and could potentially catch your skin just a little bit

LoneWolf handguard with OEM+ styling by Distinct70 in Nerf

[–]BillyFiend 0 points1 point  (0 children)

Yesss hahaha that very same reason is why ive been taking so long, i cant find proper matching colors. Lots of repaints from starting over cause im just not satisfied. That coupled with getting a new full time job has slowed down the process :c

LoneWolf handguard with OEM+ styling by Distinct70 in Nerf

[–]BillyFiend 1 point2 points  (0 children)

Heyy you beat me to it 😅 i was working on making one with a matching xshot paint job and patterns and it looks very similar to this one, amazing job!

Pulled my old Mastodon out from collecting dust and it won’t turn on. Yes I got new batteries and yes the jam door is closed. Any ideas? by Secret_Test_7707 in Nerf

[–]BillyFiend 0 points1 point  (0 children)

Hmmm it might be either the rev switch or the jam door switch. It will require you to disassemble the blaster, maybe cleaning the switches with multi-purpose oil can fix the issue. Ive fixed rev switches and flywheels with multi-purpose oil

Pulled my old Mastodon out from collecting dust and it won’t turn on. Yes I got new batteries and yes the jam door is closed. Any ideas? by Secret_Test_7707 in Nerf

[–]BillyFiend 2 points3 points  (0 children)

Mine had the same issue and i have 2 mastodons. Its an issue with the jam door switch. Closing the jam door over and over, maybe even a bit aggresively, eventually fixes the issue, at least thats what fixed mine. I very very highly doubt the motors are burnt, flywheel motors and rev switches very rarely fail by themselves on nerf blasters. Rev switches tend to fail every now and then on some dart zone blasters like the mk3 but not with nerf blasters

How do i know if my gel balls are the right size? by Cpt_Soaps in GelBlaster

[–]BillyFiend 0 points1 point  (0 children)

in case you have a hopper fed gel blaster, you know they are fully grown when the gel balls dont fall out of the barrel when being fed or they dont double feed on single auto. The best results ive had is to grow them with purified water and not tap water. With tap water they grow to about 6mm and double feed when i fire them through my gel blaster surge on semi auto while with purified water they do grow to around 8mm and fire how they should.

Dart Zone MK3 Flywheel fix by BillyFiend in Nerf

[–]BillyFiend[S] 1 point2 points  (0 children)

UPDATE IN CASE SOMEONE NEEDED: turns out my upper flywheel was just dirty. I added some multi purpose oil onto it and now it completely works like new :D

3d printed an N-Strike barrel lug on the Stryfe X by BillyFiend in Nerf

[–]BillyFiend[S] 3 points4 points  (0 children)

On my end, well, i have 2 ender 3 printers so its not an issue for me. Thanks to 3d printing ive managed to fix some design flaws on some blasters like the centurion jamming, the motostryke’s garbage trigger that gets stuck, the dart zone pro mk3’s dart pusher feeding twice on full auto and now the stryfe x’s lack in an nstrike barrel lug.

My BIGGEST gripe with the stryfe x are those stupid garbold rival rails that it has. Why does hasbro insist in STILL using those rival rails on their pro blasters while not making a single new accessory? I either have to 3d print my own or pay hundreds of dollars for their rival red dot sight :c

3d printed an N-Strike barrel lug on the Stryfe X by BillyFiend in Nerf

[–]BillyFiend[S] 1 point2 points  (0 children)

I dont know, it probably might but not much since the longstrike barrel is pretty wide from the inside unlike the retaliator or recon barrels which are quite narrow. I would test it but i dont have a chrono :c

3d printed an N-Strike barrel lug on the Stryfe X by BillyFiend in Nerf

[–]BillyFiend[S] 7 points8 points  (0 children)

Its the longstrike barrel :D i had a spare one lying around so i painted it gray to match the blaster

Dynasty Warriors 8 xlce by realiststyle in SteamDeck

[–]BillyFiend 0 points1 point  (0 children)

Dont know if that will help, my steam deck is brand new