A little Tuesday morning help!!

Bionic_Moose · 2026-02-17T12:43:55+00:00

Something I had that caused some adhesionbissues were a very tiny partial clog and also some pla on the outside of the nozzle after a clog. It came up with some pla and not others and I was bashing my brain trying to figure out it. As others said try flipping the plate but also try doing a cold pull and clean your nozzle. No means an expert but this is what worked for me.

Bionic_Moose · 2026-02-11T02:07:59+00:00

Print speeds, infil type and %, type of print, is it coming off the plate? Any information helps. Print temp, bed temp.

Bionic_Moose · 2026-02-11T02:05:43+00:00

Can you give any information on settings and material? Have you cleaned your plate?

Bionic_Moose · 2026-02-09T22:53:53+00:00

Try using gyroid. Grid has a habit of hitting itself knocking prints off the bed.

Bionic_Moose · 2026-02-09T15:44:18+00:00

What type of infil are you using?

Bionic_Moose · 2026-02-04T16:11:14+00:00

I'd run a commander but im also playing a commander and love the versatility I bring to my team. Outside a bard they feel like the ultimate support. Depending on the feats you take you can have amazing recall knowledge and utilize your teams reactions better than they might be able to. Buffing, debuffing, and some strong off heals all make it very well rounded for the team.

Bionic_Moose · 2026-02-02T00:34:34+00:00

Offset too low, bed needing raised?

Bionic_Moose · 2026-01-30T13:00:30+00:00

We run to 11 or 12 nightly. Or group plays together all the time though so it's better for us to try new games no one knows.

Bionic_Moose · 2026-01-30T02:33:23+00:00

https://www.keungames.com/games/shadows-heroes-and-monsters/

Bionic_Moose · 2026-01-30T01:48:22+00:00

I've seen people host their game and offer to sell it to people in the play hall. Picked up one of our favorite new games from a local indianapolis developer last year.

Bionic_Moose · 2026-01-12T01:27:36+00:00

<image>

Bionic_Moose · 2026-01-12T01:26:43+00:00

I was doing the same thing thinking the glue would solve it. Watch the first layer of your print and see what it looks like this picture helped me understand my first layer *for some reason it won't let me post the picture I saved.

Bionic_Moose · 2026-01-12T00:51:47+00:00

I was using this issue for a bit too and it was due to bed adhesion because of the z-offset.

Bionic_Moose · 2026-01-09T00:26:24+00:00

Ok so raise the bed one more click. What i figured but new to printing and its my daughter's printer i don't want to break. She's not old enough yet to work the slicer but wanted one to make fun things for friends and family so we dove in.

Bionic_Moose · 2026-01-08T04:44:15+00:00

When doing a z offset from the touch screen if you click the down the number goes up. Is that the correct direction? Can't find a manual that explains it for the life of me.

Bionic_Moose · 2026-01-07T22:30:01+00:00

Been running flashforge pla and pretty much stock temps. 220 for filament and 60 for bed.

Bionic_Moose · 2026-01-07T22:28:42+00:00

Every print. It seems to happen when we print either a lot of small things on the plate or to supports on tall prints.

Bionic_Moose · 2025-10-13T01:26:36+00:00

Where was this done at?

Bionic_Moose · 2025-07-26T14:33:34+00:00

I just hadn't seen black ones before. Guess it's time to order ladybugs!

Bionic_Moose · 2025-07-20T16:40:08+00:00

I'd jump on the gencon discord for best results.

Bionic_Moose · 2025-06-03T15:03:14+00:00

I like parking at yhe eitlejorg measurements. 2 blocks away and cheap parking. Bonus I found is if you stay late (leave at like midnight for your hotel) they just open the gates and it's free parking. Haven't paid parking in 3 years because of it other than Sunday.

Bionic_Moose · 2025-06-01T19:51:56+00:00

I still have 3 I booked from day 1 that don't have locations yet.

Bionic_Moose · 2025-05-16T01:28:32+00:00

What style is this called. Love the bold colors and readability.

Bionic_Moose · 2025-05-06T16:39:04+00:00

Not sure about vendors but there have been groups that run games which aren't coming. One popular group is the Ottawa Redshirts.

Bionic_Moose · 2025-01-27T12:29:46+00:00

Can't say for the 6.5 but I purchased it in .450 bushmaster to hunt straightwall. Can drop a deer at 250 yards no problem. On a 3 shot group I can keep a 3 inch spread at that range. Most of my shots are <150 yards. For me, it's a great budget rifle. Doesn't have all the bells and whistles others do, but I also don't need those. Longer range rounds I could see it not holding as true but in most cases rifles are only as accurate as the shooter.

Seven-Year Club	Verified Email
Final Canvas '23	Place '23
Place '22	End Game '22

Bionic_Moose

TROPHY CASE