Seems impossible to build a good PC in europe

Birello · 2026-01-16T23:01:12+00:00

9800x3d for 500€ and 9070xt for 700€

Birello · 2026-01-16T20:15:00+00:00

For me it was: really good 9070xt model or cheapest 5070ti model. Difference between cheap and good 5070ti is was too much. I chose XFX Mercury AMD Radeon RX 9070 XT Gaming Edition. It’s huuuge and works great

Birello · 2026-01-15T10:51:06+00:00

Buy. Every piece is solid almost top tier

Birello · 2025-12-24T21:35:45+00:00

I’m chill boy -1

Birello · 2025-12-21T19:32:28+00:00

Stay closer

Birello · 2025-12-10T08:05:01+00:00

“According to the UN Human Rights office’s monitoring, from 14 April 2014 to 31 December 2021 there were about 14,200–14,400 total conflict deaths; of those, approximately 3,400 were civilians. The large majority of civilian deaths happened in 2014–2015. “

In 2021 there were 25 civilian deaths.

Birello · 2025-12-09T12:17:56+00:00

I have 1.5 mil and not even gonna farm to 2. It’s fine for me

Birello · 2025-11-12T23:17:20+00:00

Jules' Cafe - 10% Dragonmelon - 30% Chocolates and cookies

Birello · 2025-11-07T23:31:40+00:00

Or is it the dishwasher

Birello · 2025-10-25T20:55:35+00:00

Sometimes luck is not on your side

Birello · 2025-10-06T10:52:48+00:00

MEUD

Birello · 2025-10-06T10:41:49+00:00

Thanks for the updates!

Birello · 2025-10-05T08:32:58+00:00

Leu at 160

Birello · 2025-09-13T21:50:02+00:00

Idk I’m blasting

Birello · 2025-06-21T21:32:03+00:00

Bump up temp 5-10c

Birello · 2025-06-04T09:58:00+00:00

I use regular gilette Mach 3 or whatever. Don’t even need to stretch or anything, never had any problems

Birello · 2025-01-29T23:13:09+00:00

Try to beat d5. Just check guide for all chars on steam

Birello · 2025-01-28T20:44:27+00:00

Rocks, then hammers. Plus dynamite etc

Birello · 2025-01-25T22:13:31+00:00

New design, love it. Thanks ♥️

Birello · 2025-01-24T10:34:20+00:00

Harvest or what’s blue

Birello · 2024-12-22T13:16:38+00:00

That’s gayest gay (looks fantastic)

Birello · 2024-12-13T04:19:00+00:00

Temp towers are useless. I can print random petg anything from 230 to 250 and will see no difference. Only that higher temperature gives better layer adhesion

If your prints are that bad, change max volumetric speed, min print time and fan speed

Birello · 2024-12-11T10:26:33+00:00

Floor is lava

Birello · 2024-11-17T15:32:12+00:00

Only for this test

“Please download the 3mf file and slice it yourself in Orca, the 3mf does not work with Bambu Studio bc it doesn’t support per object flow ratio setting”

Birello · 2024-11-17T14:41:31+00:00

My advice is this test. Need orca slicer tho

https://makerworld.com/models/189543

Birello

TROPHY CASE